1. Isingeniso
Thank you for choosing the SUPER DEAL Upgraded 300W Electric Ice Shaver. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new ice shaver. Designed for both home and commercial use, this machine quickly transforms ice into fine shaved ice, perfect for snow cones, slushies, and other frozen treats.
The machine features a robust design with safety in mind, ensuring the blade is not accessible from the outside during operation. Please read this manual thoroughly before first use and retain it for future reference.
2. Iziyalezo Zokuphepha
- Njalo qinisekisa ukuthi umshini ubekwe endaweni ezinzile, esezingeni ngaphambi kokusebenza.
- Keep hands and foreign objects away from the ice inlet and shaving blade during operation. The machine is designed with a safety switch that prevents operation when the hopper handle is raised.
- Ungacwilisi injini emanzini noma kolunye uketshezi. Hlanza kuphela ngesikhangisoamp indwangu.
- Khipha umshini endaweni yokukhipha amandla ngaphambi kokuhlanza, ukulungisa, noma uma ungasebenzi.
- Do not operate the machine with a damaged cord or plug, or if it has been dropped or damaged in any manner. Contact customer support for assistance.
- Lesi sixhobo asihloselwe ukusetshenziswa abantu (kuhlanganise nezingane) abanekhono elincishisiwe lomzimba, izinzwa, noma engqondo, noma abangenalo ulwazi nolwazi, ngaphandle uma benikezwe ukugadwa noma umyalelo ophathelene nokusetshenziswa kwento kagesi ngumuntu onesibopho sokuphepha kwabo. .
- Gada izingane ukuze uqinisekise ukuthi azidlali ngalo mshini.
- Use only ice cubes or blocks of ice. Do not attempt to shave other materials.
- Ensure the stainless steel bowl is properly positioned to collect shaved ice and prevent spills.
3. Umkhiqizo Uphelileview
The SUPER DEAL Electric Ice Shaver is constructed with durable materials, including an anodized aluminum casing and hopper, and a heavy cast base for stability.
Figure 3.1: The SUPER DEAL Electric Ice Shaver, showcasing its compact design and the output of fine shaved ice.
Izingxenye Ezibalulekile:
- Ice Hopper: The top opening where ice is loaded.
- Pressing Handle: Used to apply pressure to the ice against the blade. Features a safety switch.
- Shaving Blade: Commercial-grade stainless steel blade for efficient ice shaving.
- Ice Outlet: Where the shaved ice exits the machine.
- Vula/Vala Iswishi: Water-resistant switch located on the front of the machine.
- Isitsha Sensimbi Engagqwali: Included for collecting shaved ice.
- Heavy Cast Base: Provides stability and reduces vibration during operation.
4. Setha
Before first use, unpack all components and ensure no parts are missing or damaged. Place the ice shaver on a clean, dry, and stable surface. Ensure there is adequate space around the machine for ventilation and operation.
Figure 4.1: Ensure the stainless steel bowl is correctly positioned under the ice outlet before operation.
- Remove all packaging materials and protective films from the machine.
- Wipe down the machine's exterior and the stainless steel bowl with a damp indwangu ngaphambi kokusetshenziswa kokuqala.
- Place the machine on a sturdy, flat surface.
- Position the stainless steel bowl directly under the ice outlet to catch the shaved ice.
- Ensure the pressing handle is in the fully raised position, which activates the safety switch and prevents the motor from starting inadvertently.
- Plug the power cord into a standard 110V / 60Hz electrical outlet.
5. Iziqondiso Zokusebenza
Operating the SUPER DEAL Ice Shaver is straightforward. Follow these steps for optimal results:
Figure 5.1: The ice shaver ready for operation with ice in the hopper.
- Ensure the machine is plugged in and the stainless steel bowl is in place.
- Lift the pressing handle to its highest position.
- Carefully place ice cubes into the ice hopper. Do not overfill.
- Turn on the machine using the water-resistant On/Off switch located on the front.
- Slowly lower the pressing handle. The machine will begin shaving ice as the handle is lowered and pressure is applied to the ice. The safety switch will disengage, allowing the motor to run.
- Apply steady, even pressure on the handle to achieve consistent shaved ice.
- Once all the ice has been shaved, lift the pressing handle to its highest position to activate the safety switch and stop the motor.
- Turn off the machine using the On/Off switch.
- Remove the bowl of shaved ice.
6. Ukunakekela kanye Nokuhlanza
Regular cleaning and maintenance will ensure the longevity and optimal performance of your ice shaver.
- Khipha: Njalo khipha umshini ku-outlet kagesi ngaphambi kokuhlanza.
- Sula Phansi: After each use, wipe down the interior of the ice hopper and the area around the blade with a clean, damp cloth to remove any ice residue and moisture. Pay special attention to the area directly below the blade and around the ice outlet to prevent water from pooling on your counter.
- Isitsha esihlanzekile: Wash the stainless steel bowl with warm, soapy water. Rinse thoroughly and dry completely before storing.
- Ingaphandle: Sula ingaphandle lomshini ngesithambile, damp indwangu. Ungasebenzisi izinto zokuhlanza abrasive noma amaphedi okukhuhla.
- Ukomisa: Allow all parts to air dry completely before reassembling or storing the machine to prevent rust and mildew.
- Isitoreji: Store the ice shaver in a dry, cool place away from direct sunlight.
7. Ukuxazulula izinkinga
If you encounter any issues with your SUPER DEAL Ice Shaver, refer to the following common problems and solutions:
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Umshini awuvuli. | Not plugged in; Power switch off; Safety handle not fully lowered. | Ensure power cord is securely plugged in. Turn the On/Off switch to 'On'. Lower the pressing handle completely to engage the motor. |
| Ice is not shaving or shaving poorly. | Insufficient pressure on handle; Blade dull or damaged; Incorrect ice type. | Apply more consistent pressure on the pressing handle. If the blade is dull, contact customer support for replacement. Use standard ice cubes. |
| Water pooling on counter. | Excess ice residue melting; Bowl not positioned correctly. | Wipe down the machine thoroughly after each use, especially around the ice outlet. Ensure the collection bowl is directly under the outlet. |
| Machine is excessively noisy or vibrating. | Unstable surface; Loose components. | Ensure the machine is on a stable, level surface. Check for any loose parts and tighten if necessary. If noise persists, discontinue use and contact support. |
8. Imininingwane
The following are the technical specifications for the SUPER DEAL Electric Ice Shaver:
Figure 8.1: Product label with key electrical specifications.
- Imodeli: Upgraded 300W Electric Ice Shaver
- Voltage: 110V / 60Hz
- Amandla: 300W
- Isivinini Esizungezisiwe: 2000 Runs/Min
- Ikhono lokushefa: Approximately 143 lbs/h (65 kg/h)
- Isisindo Sento: Cishe amakhilogremu angu-11.95
- Ubukhulu bephakheji: 17.04 x 12.13 x 7.8 amayintshi
9. Iwaranti kanye Nokusekela
For warranty information and customer support, please refer to the documentation included with your purchase or contact SUPER DEAL directly. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, please visit the official SUPER DEAL store or contact their customer service department.
Umkhiqizi: I-SUPER DEAL
