Jandy Pro Series PSB220 Pool and Spa Air Blower

Isingeniso

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Jandy Pro Series PSB220 Pool and Spa Air Blower. The PSB220 is designed to provide powerful and quiet aeration for your pool or spa, enhancing your aquatic experience. Please read this manual thoroughly before attempting any installation or operation.

Ulwazi Lokuphepha

WARNING: Risk of Electric Shock or Electrocution.

• All electrical wiring must be performed by a qualified electrician and conform to all local and national electrical codes.
• Ensure the power supply is disconnected at the circuit breaker before performing any service or maintenance.
• This blower is equipped with a thermally protected motor which automatically shuts off under excessive operating heat. Allow 30 minutes for blower cooling and restart.
• Only use copper conductors for wiring connections.
• Do not operate the blower if it has been submerged in water.
• Gcina izandla, izinwele, nezingubo ezixegayo kude nezingxenye ezihambayo.

Izici Zomkhiqizo

• Ukusebenza Kwe-Ultra Quiet: Engineered for a more peaceful backyard experience.
• Ukusebenza Okunamandla: Features a 2.0 HP motor for effective aeration.
• Voltage: Isebenza kuma-volts angu-240.
• Ukuvimbela Ukulimala Kwamanzi: Built-in check valves prevent water from damaging the blower motor.
• Ukufaka Okulula: Designed for easy bottom mount installation with an included wall bracket.
• Ukusetshenziswa Kwangaphakathi/Ngaphandle: Ifanele kokubili ukufakwa kwangaphakathi nangaphandle.

Ukusetha nokufaka

Proper installation is crucial for the performance and longevity of your Jandy PSB220 blower. It is recommended that installation be performed by a licensed professional to ensure compliance with all safety standards and to maintain product warranty.

1. Indawo yokukhweza: Select a suitable location for the blower. The unit is designed for bottom mount installation and includes a wall bracket for secure attachment. Ensure the location allows for proper ventilation and access for maintenance.
2. Ukukhweza Okuvikelekile: Use the provided wall bracket to securely fasten the blower to a stable surface. The bottom of the unit is marked "FASTEN HERE" to indicate the mounting point.

Umfanekiso 1: Phansi view of the Jandy PSB220 blower, highlighting the "FASTEN HERE" marking for secure installation.
3. Uxhumano lukagesi: Connect the blower to a 240V power supply. Ensure all wiring is done with copper conductors and adheres to local electrical codes. The internal wiring connections are accessible for professional installation.


Umfanekiso 2: View of the internal wiring compartment of the Jandy PSB220 blower, showing blue and green wires for electrical connection.

4. Uxhumano lwamapayipi: Connect the blower to your pool or spa's air line. The built-in check valves will prevent water from entering the motor.
5. Ukuhlola Kokugcina: Before restoring power, double-check all connections to ensure they are secure and correctly installed.

Umfanekiso 3: Ngaphambili view of the Jandy PSB220 Pro Series Pool and Spa Air Blower, showing the product label.

Umfanekiso 4: Uhlangothi view of the Jandy PSB220 Pro Series Pool and Spa Air Blower, illustrating its compact design.

Figure 5: Close-up of the Jandy PSB220 product label, displaying model number, serial number, peak HP, voltage, futhi ampi-erage.

Imiyalelo yokusebenza

The Jandy PSB220 blower is designed for straightforward operation once properly installed.

1. Vula: Restore power to the blower at the circuit breaker.
2. Ukwenza kusebenze: The blower can be activated via your pool/spa control system or a dedicated switch, depending on your setup.
3. Umoya: The blower will begin to push air into your pool or spa, creating bubbles and enhancing water circulation. This can be particularly useful for cooling down pool water in hot climates.
4. Ukuvikelwa Kokushisa: In case of excessive heat, the motor's thermal protection will activate, shutting off the unit. If this occurs, allow the blower to cool for at least 30 minutes before attempting to restart it.

Isondlo

The Jandy PSB220 is designed for minimal maintenance. Regular checks can help ensure its longevity and optimal performance.

• Hlala Ucacile: Ensure the area around the blower is free from debris, leaves, and other obstructions that could impede airflow or cause overheating.
• Hlola izintambo: Periodically check electrical connections for any signs of wear, corrosion, or looseness. Ensure power is off before inspection.
• Hlanza Ingaphandle: Sula ingaphandle le-blower ngesikhangisoamp cloth to remove dirt and dust. Do not use harsh chemicals or abrasive cleaners.
• Lalela Imisindo Engajwayelekile: If you notice any unusual noises or vibrations during operation, disconnect power and consult a qualified technician.

Ukuxazulula inkinga

Imininingwane

Ulwazi Lwewaranti

Jandy products are manufactured to high standards and come with a limited warranty. Please note that for the warranty to be valid, installation of the PSB220 blower must be performed by a licensed professional. Self-installation may void the manufacturer's warranty. Refer to the official Jandy warranty documentation for complete terms and conditions.

Ukusekela

For technical assistance, replacement parts, or warranty claims, please contact Jandy customer support or visit their official webindawo:

• Webindawo: www.jandy.com
• Ucingo: 1-800-822-7933
• Ikheli: Zodiac Pool Systems, Inc., 2620 Commerce Way, Vista, CA 92081