1. Isingeniso
The Datapath Fx4/D is a versatile stand-alone display wall controller designed for managing complex video wall configurations. It accepts a single 4K input and distributes it across four DisplayPort outputs, enabling the creation of high-resolution video walls. This manual provides essential information for the proper setup, operation, and maintenance of your Fx4/D unit.
2. Izici Eziyinhloko
- UHD/4K60 input support.
- Four HD 1080p outputs.
- Supports arbitrary crop scaling, mirrors, and bezel correction.
- Multiple inputs for flexible connectivity (Dual HDMI 1.4 or single DisplayPort 1.2 inputs).
- HDCP 1.4 support on all inputs and outputs.
- True stand-alone operation: Fx4 can adapt to changes in inputs by adjusting all scale factors.
- Network and USB interfaces allow platform-independent control (MAC OSX 10.13 & later).
- Pre-load an image for use when a signal is not detected.
3. Umkhiqizo Uphelileview
The Datapath Fx4/D unit features a robust design with clearly labeled ports and indicators for ease of use.
3.1 Iphaneli langaphambili
The front panel includes status indicators for power, input, and general device status.
Umfanekiso 1: Ngaphambili view of the Datapath Fx4/D unit. This image shows the front face of the controller, displaying the 'DATAPATH Fx4' branding and LED indicators for POWER, INPUT, and STATUS on the right side.
3.2 Iphaneli yangemuva
The rear panel houses all input and output connections, along with network and USB ports for control.
Umfanekiso 2: Ngemuva view of the Datapath Fx4/D unit. This image details the connectivity options, including SYNC, HDMI 1 & 2 inputs, DisplayPort IN and LOOP OUT, four MONITOR OUTPUTS, LAN, USB, and the main power input with a switch and fuse.
4. Setha
Follow these steps to correctly set up your Datapath Fx4/D controller.
4.1 Amandla okuxhuma
- Ensure the Fx4/D unit is placed on a stable, level surface with adequate ventilation.
- Connect the provided power cable to the AC inlet on the rear panel of the Fx4/D.
- Plug the other end of the power cable into a suitable electrical outlet.
- Toggle the power switch on the rear panel to the 'ON' position. The 'POWER' LED on the front panel should illuminate.
4.2 Connecting Video Inputs
The Fx4/D supports various video input configurations.
- Identify the video source (e.g., PC, media player) you wish to connect.
- Connect your video source to either the DisplayPort IN or one of the HDMI 1 or HDMI 2 inputs on the rear panel of the Fx4/D.
- For DisplayPort input, use a DisplayPort 1.2 cable. For HDMI inputs, use HDMI 1.4 cables.
- If using the DisplayPort input, you can use the DisplayPort LOOP OUT to daisy-chain to another device or monitor if required.
4.3 Connecting Video Outputs
The Fx4/D provides four DisplayPort outputs for connecting to your display wall.
- Connect DisplayPort cables from the four 'MONITOR OUTPUTS' on the Fx4/D rear panel to your individual display screens.
- Ensure each display is powered on and set to the correct input source.
4.4 Ukuxhumeka kwenethiwekhi ne-USB
For control and configuration, connect the Fx4/D to a network or directly via USB.
- Inethiwekhi: Connect an Ethernet cable from the 'LAN' port on the Fx4/D to your network switch or router. This allows control via the Datapath Wall Designer software.
- I-USB: Connect a USB cable from the 'USB' port on the Fx4/D to your control PC for direct configuration.
5. Ukusebenza
Once the Fx4/D is physically connected, use the Datapath Wall Designer software for configuration and control.
5.1 Wall Designer Software
The Wall Designer software is used to configure the layout, scaling, and bezel correction for your video wall. It allows you to define the arrangement of your displays and how the input signal is mapped across them.
- Download and install the latest version of Datapath Wall Designer from the official Datapath webindawo.
- Launch the software and connect to your Fx4/D unit via the network or USB.
- Follow the on-screen instructions within the software to set up your display wall configuration, including input selection, output mapping, and any necessary scaling or bezel adjustments.
- Save your configuration to the Fx4/D unit. The unit can operate in a stand-alone mode once configured.
5.2 Input Signal Detection
The Fx4/D automatically detects the input signal. The 'INPUT' LED on the front panel will indicate the presence of an active input signal. If no signal is detected, a pre-loaded image can be displayed.
6. Isondlo
To ensure optimal performance and longevity of your Fx4/D unit, follow these basic maintenance guidelines:
- Ukuhlanza: Use a soft, dry cloth to clean the exterior of the unit. Avoid using liquid cleaners or solvents.
- Ukungenisa umoya: Ensure that the ventilation openings are not obstructed to prevent overheating.
- Ukuvuselelwa kwe-Firmware: Regularly check the Datapath website for firmware updates. Updates can improve performance and add new features. Firmware updates are supported via USB and Ethernet connection.
- Izimo Zemvelo: Operate the unit within the specified operating temperature and humidity ranges to prevent damage.
7. Ukuxazulula izinkinga
This section addresses common issues you might encounter with the Fx4/D unit.
- Awekho Amandla:
- Check if the power cable is securely connected to both the Fx4/D and the power outlet.
- Ensure the power switch on the rear panel is in the 'ON' position.
- Qinisekisa ukuthi i-outlet yamandla iyasebenza.
- Akukho okukhipha ividiyo:
- Confirm that the video source is active and sending a signal.
- Check all video input and output cables for secure connections.
- Ensure the displays are powered on and set to the correct input.
- Verify the configuration in the Wall Designer software.
- Incorrect Display Layout/Scaling:
- Reconnect to the Fx4/D using Wall Designer software.
- Review and adjust the display layout, scaling, and bezel correction settings.
- Ensure the input resolution matches the expected resolution in the software.
- Cannot Connect via Network/USB:
- Inethiwekhi: Check Ethernet cable connection. Verify network settings on your PC and the Fx4/D (if configured for static IP). Ensure no firewall is blocking communication.
- I-USB: Ensure the USB cable is connected directly to the PC and not through an unpowered hub. Try a different USB port or cable.
8. Imininingwane
Detailed technical specifications for the Datapath Fx4/D unit are provided below.
Umfanekiso 3: Detailed specification sheet for the Datapath Fx4/D, outlining dimensions, weight, operating conditions, power, video connections, and control interfaces.
| Isigaba | Ukucaciswa |
|---|---|
| Ubukhulu | 316mm (l) x 172mm (w) x 42mm (h) |
| Isisindo | 1.86kg |
| Izinga Lokushisa Lokusebenza | 0 °C kuya ku-35 °C / 32 °F kuya ku-96 °F |
| Izidingo zamandla | IEC switched and fused mains connector 100-240V, 50/60Hz / 35W |
| Izixhumanisi Zokufaka Ividiyo | 1 x DisplayPort 1.2 (2160p60 or equivalent up to 616Mp/s) 2 x HDMI 1.4 (2160p30 (4:2:0), 2160p60 or equivalent up to 297Mp/s) |
| Video Output Connections | HDMI version 1.4 x HDMI 3 (1080p50, 1200p60 or equivalent up to 165Mp/s)* DisplayPort version: 4 x DP 1.1 (1080p50, 1200p60 or equivalent up to 165Mp/s) *Outputs above 165Mp/s but taller/wider than 2048 require testing Loop-through (both versions): DisplayPort 1.2 (locked to selected video input resolution) |
| Input Surface | 8K x 8K maximum |
| Okokufaka kwe-Genlock | Analog black-burst on dedicated BNC connector. Any video input (HDMI, HDMI, DisplayPort) |
| Izindlela Zokulawula | Dual 100Base-T Ethernet ports with inbuilt managed switch. USB 2.0 Type B connector (full speed operation) |
| Ukusekelwa kweFirmware | Updates supported via USB and Ethernet connection |
| Isitoreji | -20 ° C kuye ku-70 ° C / -4 ° F kuya ku-158 ° F |
| Umswakama Ohlobene | 5% -90% ukungafinyeleli |
| Iwaranti | 3 iminyaka |
9. Iwaranti kanye Nokusekela
The Datapath Fx4/D unit comes with a Iwaranti yonyaka ongu-3 from the date of purchase. For warranty claims or technical support, please contact Datapath customer service or visit their official website for detailed support resources, FAQs, and contact information.
All products are shipped with the latest software available, unless stated otherwise. Special requirements may be organised by contacting our Sales team.
