Fieldpiece SC620 Loaded Clamp Multimeter with Swivel Head Instruction Manual

Isingeniso

The Fieldpiece SC620 is a professional-grade loaded clamp multimeter designed for HVACR technicians. It provides comprehensive electrical measurements including AC/DC voltage, AC current, DC microamps, frequency, temperature, and capacitance. This manual provides essential information for safe and effective operation of your SC620 multimeter. Please read this manual thoroughly before using the device.

Okuqukethwe Kwephakheji

The Fieldpiece SC620 package typically includes:

• SC620 Clamp I-Multimeter
• Test Leads with Alligator Clips
• Ibhethri le-9V (lifakiwe)
• Incwadi Yomsebenzisi (le dokhumenti)

Izici Zomkhiqizo

The Fieldpiece SC620 offers a range of features for HVACR diagnostics:

• Izinyathelo Volts AC/DC
• Izinyathelo 400 Amps AC
• Izinyathelo I-Microamps DC for flame diode tests
• Izinyathelo Imvamisa via leads and clamp
• I-non-contact voltage (NCV) inkomba
• Ikhanda eliphendukayo for easy access in tight spaces
• Okuphakeme voltage LED and beeper ukuze kuphephe
• Continuity warning
• Lead holder with detachable leads and alligator probe tips
• Izinga lokushisa futhi Amandla izilinganiso

Setha

1. Ukufakwa kwebhethri

The SC620 multimeter requires one 9V battery for operation. The battery is typically included with the device. To install or replace the battery:

1. Thola isembozo segumbi lebhethri ngemuva kwe-multimeter.
2. Sebenzisa i-screwdriver ukuze uvule igumbi.
3. Faka ibhethri elisha le-9V, uqaphela i-polarity efanele (+/-).
4. Vikela ngokuqinile ikhava yegumbi lebhethri.

2. Ukuxhumanisa Abaholi Bokuhlola

Connect the red test lead to the VΩmA input jack and the black test lead to the COM input jack. Ensure the connections are firm. For current measurements using the clamp, no lead connection is required for the primary measurement, but leads may be used for other functions simultaneously.

Imiyalelo yokusebenza

1. Vula/Vala

Rotate the function dial to any measurement setting to power on the multimeter. To power off, rotate the dial to the 'OFF' position.

2. I-AC/DC Voltage Ukukala

Ukukala ivolumutage:

1. Rotate the function dial to the 'V~' (AC Voltage) noma 'V=' (DC Voltage) isikhundla.
2. Connect the test leads to the circuit in parallel.
3. Funda ivolumutage kusibonisi.

3. Ukulinganisa Kwamanje kwe-AC (Cl)amp)

Ukulinganisa i-AC yamanje:

1. Rotate the function dial to the 'A~' (AC Amps) isikhundla.
2. Vula i-clamp jaw and enclose a single conductor of the circuit.
3. Qinisekisa ukuthi umhlathi uvaliwe ngokuphelele.
4. Funda inani lamanje esibukweni.

4. DC Microamps Ukukala

To measure DC microamps (e.g., for flame diode tests):

1. Rotate the function dial to the 'µA=' (DC Microamps) isikhundla.
2. Connect the test leads in series with the component to be measured.
3. Read the microampere value on the display.

5. Resistance and Continuity

To measure resistance or check continuity:

1. Rotate the function dial to the 'Ω' (Resistance) position.
2. Xhuma izintambo zokuhlola kulo lonke ingxenye.
3. For continuity, the meter will beep if a low resistance path is detected.

6. Ukukala Imvamisa

The SC620 can measure frequency via leads or clamp. Rotate the function dial to the 'Hz' position and follow the appropriate connection method.

7. Ongathintana Naye Umqtage (NCV)

Press the NCV button to activate the non-contact voltage detection feature. Hold the tip of the meter near a live AC voltage source. The meter will indicate the presence of voltage with an LED and an audible beep.

8. Isilinganiso Sokushisa

Connect a Type K thermocouple (if included, typically sold separately or as part of a kit) to the designated temperature input jacks. Rotate the function dial to the 'TEMP' position to measure temperature.

9. Ukukala Amandla

Ukukala amandla:

1. Rotate the function dial to the 'nF' (Capacitance) position.
2. Ensure the capacitor is discharged before connecting the test leads.
3. Xhuma izintambo zokuhlola ngaphesheya kwe-capacitor.
4. Funda inani le-capacitance kusibonisi.

Isondlo

1. Ukuhlanza

Wipe the multimeter with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the device is dry before storage or use.

2. Ukushintshwa Kwebhethri

Replace the 9V battery when the low battery indicator appears on the display. Refer to the 'Battery Installation' section for instructions.

3. Isitoreji

Store the multimeter in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.

Ukuxazulula inkinga

1. No Display or Faint Display

• Check battery charge. Replace the 9V battery if low.
• Ensure the function dial is not in the 'OFF' position.

2. Incorrect Readings

• Verify test lead connections are secure and correct for the measurement type.
• Ensure the correct function and range are selected.
• Check for damaged test leads.
• For current measurements, ensure only one conductor is clamped.

3. No Continuity Beep

• Ensure the meter is in the continuity mode.
• Check for an open circuit or high resistance in the component being tested.

Imininingwane

Iwaranti kanye Nokusekela

Ulwazi Lwewaranti

For detailed warranty information, please refer to the documentation provided with your purchase or visit the official Fieldpiece webindawo. Gcina ubufakazi bakho bokuthenga ngezimangalo zewaranti.

Ukwesekwa Kwamakhasimende

If you encounter any issues or have questions regarding your Fieldpiece SC620 multimeter, please contact Fieldpiece customer support through their official webisayithi noma imininingwane yokuxhumana enikezwe emaphaketheni omkhiqizo wakho.