I-Hilti 2038077 TE-C 3/8" x 12" SDS PLUS Incwadi Yomsebenzisi Ye-Hammer Drill Bit

Isingeniso

This manual provides essential information for the safe and effective use of your Hilti 2038077 TE-C 3/8" x 12" SDS PLUS Hammer Drill Bit. Please read these instructions carefully before use and retain them for future reference. This drill bit is designed for general purpose concrete and masonry applications.

Ulwazi Lokuphepha

Always observe general safety precautions when working with power tools and accessories. Failure to follow these instructions may result in injury or damage to the tool or workpiece.

• Gqoka izinto zokuzivikela ezifanele (i-PPE), okuhlanganisa izibuko zokuphepha, ukuvikela ukuzwa, namagilavu.
• Ensure the drill bit is securely seated in the hammer drill chuck before operation.
• Do not exceed the maximum rotational speed recommended for your hammer drill and the material being drilled.
• Avoid applying excessive force, which can cause the bit to bind or break.
• Nqamula ithuluzi lamandla emthonjeni wamandla ngaphambi kokushintsha izisekeli noma ukulungisa.
• Gcina izandla nezingubo ezixegayo kude nezingxenye eziphendukayo.
• Check the workpiece for hidden electrical wires, gas pipes, or water pipes before drilling.

Umkhiqizo Uphelileview

The Hilti 2038077 TE-C 3/8" x 12" SDS PLUS Hammer Drill Bit is engineered for efficient drilling in concrete and masonry. Its robust carbide construction ensures durability and minimizes wear during demanding applications.

Image: The Hilti TE-C 3/8" x 12" SDS PLUS Hammer Drill Bit, featuring its spiral flute design and SDS PLUS shank.

Izici Eziyinhloko:

• Ukwakhiwa Okuqinile: Manufactured with strong, wear-resistant carbide.
• SDS PLUS Shank: Designed for quick and secure insertion into SDS PLUS rotary hammer drills.
• Efficient Drilling: Optimized for quick and hassle-free drilling in concrete and masonry.
• Uhlelo lokusebenza oluhlukahlukene: Suitable for general purpose concrete and masonry tasks.

Setha

1. Khetha I-Bit Drill Elungile: Ensure the Hilti 2038077 TE-C 3/8" x 12" SDS PLUS drill bit is appropriate for your application and material.
2. Prepare the Hammer Drill: Ensure your rotary hammer drill is unplugged or its battery is removed before installing the bit.
3. Faka i-Drill Bit:
   • Pull back the chuck collar on your SDS PLUS rotary hammer drill.
   • Insert the SDS PLUS shank of the drill bit into the chuck until it clicks into place.
   • Khulula ikhola ye-chuck.
   • Pull on the drill bit to ensure it is securely locked. There should be a slight amount of play, which is normal for SDS PLUS systems.
4. Inspect the Bit: Before use, check the drill bit for any signs of damage or excessive wear. Do not use damaged bits.

Imiyalelo yokusebenza

Follow these steps for optimal performance and safety when using your Hilti hammer drill bit:

1. Maka Indawo Yokubhoboza: Clearly mark the precise spot where you intend to drill.
2. Misa i-Drill: Hold the hammer drill firmly with both hands. Position the tip of the drill bit directly on the marked spot.
3. Qala Ukubhola:
   • Start the drill at a low speed to create a pilot indentation, preventing the bit from wandering.
   • Once the bit has engaged the material, increase the speed and apply steady, moderate pressure.
   • Allow the hammer action of the drill to do the work; excessive force is not required and can reduce bit life.
4. Maintain Drilling Angle: Keep the drill bit perpendicular to the drilling surface throughout the process to ensure a straight hole.
5. Sula Imfucumfucu: Periodically withdraw the drill bit slightly from the hole to allow dust and debris to escape, especially when drilling deep holes. This helps prevent clogging and overheating.
6. Qeda Ukubhola: Once the desired depth is reached, slowly withdraw the drill bit from the hole while the drill is still running to clear any remaining debris.

Qaphela: For optimal performance and to prolong bit life, avoid overheating. If the bit becomes excessively hot, allow it to cool before continuing.

Isondlo

Proper maintenance ensures the longevity and performance of your Hilti drill bit.

• Ukuhlanza: After each use, clean the drill bit to remove dust and debris. A stiff brush or compressed air can be used.
• Ukuhlola: Regularly inspect the carbide tip for chipping or excessive wear. Inspect the shank for damage. Replace the bit if it shows significant wear or damage.
• Isitoreji: Store drill bits in a dry place to prevent rust. Keep them in their original packaging or a dedicated drill bit case to protect the tips.
• Lubrication (Shank): A small amount of grease on the SDS PLUS shank can help reduce wear on the chuck and improve bit insertion/removal.

Ukuxazulula inkinga

Imininingwane

Iwaranti kanye Nokusekela

For information regarding warranty coverage, technical support, or service for your Hilti product, please refer to the official Hilti webnoma xhumana nesevisi yamakhasimende e-Hilti ngqo. Gcina irisidi lakho lokuthenga njengobufakazi bokuthenga.

Isikhulu se-Hilti Webindawo: www.hilti.com

Insizakalo yekhasimende: Bheka ulwazi lokuxhumana olunikezwe ku-Hilti webindawo yesifunda sakho.