Fantech ECO-Touch Programmable Touch Screen Wall Control User Manual

Isingeniso

The Fantech ECO-Touch Programmable Touch Screen Wall Control is designed to provide intuitive and efficient management of your home's ventilation system. This advanced control unit features a touch screen interface, allowing for easy adjustment of settings and monitoring of indoor conditions. Its unique ECO Mode optimizes operation for energy efficiency, while various manual modes offer tailored control over ventilation and fan speed. The ECO-Touch is compatible with Fantech's SHR/VHR (HRV), SER (ERV), and FLEX Series units.

This manual provides essential information for the proper installation, operation, and maintenance of your ECO-Touch control.

Ulwazi Lokuphepha

Please read all instructions carefully before installation and operation. Improper installation or use can lead to electrical shock, injury, or damage to the product. Always disconnect power before performing any wiring or maintenance.

Ukufakwa kufanele kwenziwe nguchwepheshe kagesi oqeqeshiwe ngokuhambisana nazo zonke izikhodi zikagesi zendawo nezesizwe.
Ensure the power supply to the ventilation unit is disconnected before connecting the ECO-Touch control.
Do not expose the control to water or excessive humidity.
Ungazami ukulungisa noma ukuguqula iyunithi ngokwakho. Thumela konke ukusevisa kubasebenzi abafanelekayo.

Ukusetha nokufaka

The ECO-Touch control is designed for simplified installation, utilizing a proprietary two-wire communication protocol that is not polarity sensitive. It can be mounted to a standard electrical box or directly to the wall.

Ukukhweza

Choose a suitable location for the control, typically in a central living area.
Ensure the power to the ventilation unit is OFF at the circuit breaker.
Mount the control unit either directly to the wall or to a standard electrical box using appropriate screws.

Izintambo

Connect the two communication wires from your Fantech ventilation unit to the designated terminals on the ECO-Touch control. The two-wire protocol is not polarity sensitive, simplifying connections.
Qinisekisa ukuthi konke ukuxhumana kuvikelekile.
Once wiring is complete, restore power to the ventilation unit. The ECO-Touch display should power on. If the display does not power up, check the connections; sometimes, reversing the connector orientation can resolve this.

Fantech ECO-Touch Programmable Touch Screen Wall Control showing the display with Auto, Manual, and Options sections.

Umfanekiso 1: Ngaphambili view of the Fantech ECO-Touch control. The display shows sections for 'AUTO', 'MANUAL', and 'OPTIONS', along with a house icon indicating ventilation status. The Fantech logo is visible at the bottom.

Imiyalelo yokusebenza

The ECO-Touch offers both automatic and manual operation modes to suit various user preferences.

Khombisa ngaphezuluview

LCD Backlit Touch Screen: 2 x 3 inch (5.08 cm x 7.62 cm) display for clear visibility and interaction.
Isibonisi Sezinga lokushisa Kwangaphakathi: Shows current indoor temperature in Fahrenheit or Celsius.
Indoor Relative Humidity Display: Shows current indoor relative humidity.
Ventilation Movement: Indicated on screen.
Isikhumbuzi Sokulungisa: An indicator will appear when maintenance is due.
Error Code Messages: Displayed to assist with troubleshooting.

Izindlela zokusebenza

ECO Mode (Automatic): This unique one-touch mode automatically selects the optimal operating settings based on current home conditions. It is designed to lower energy consumption by up to 25% while maintaining desired indoor air quality.
Amamodi okwenziwa ngesandla:
- Imodi Yokungenisa umoya: Allows manual control over the ventilation process.
- Isivinini saphephela: Adjust the fan speed of the connected ventilation unit.
Imodi engu-MAX: Provides extra ventilating power to quickly clear the air. When activated, the system exchanges indoor air for outdoor air at maximum speed for a user-selected duration of 20, 40, or 60 minutes.

Izilungiselelo Nezintandokazi

Amayunithi Okushisa: Select between Fahrenheit or Celsius for temperature display.
Humidity Preferences: Set desired indoor relative humidity levels.
Amandla Outage Retention: All programmable settings are retained automatically during power outages, eliminating the need for re-configuration.

Isondlo

The Fantech ECO-Touch control requires minimal maintenance. The unit does not use batteries, so there is no need for battery replacement.

Ukuhlanza: Gently wipe the touch screen and casing ngendwangu ethambile neyomile. Ungasebenzisi izihlanzi ezikhuhlayo noma izinyibilikisi.
Isikhumbuzi Sokulungisa: The control features a maintenance reminder indicator. When this indicator appears, it typically signals that the connected ventilation unit may require filter cleaning or replacement, or other routine maintenance as specified in the ventilation unit's manual.

Ukuxazulula inkinga

If you encounter issues with your ECO-Touch control, refer to the following common troubleshooting steps:

Inkinga	Imbangela Engenzeka	Isixazululo
Control display does not power on.	No power to the ventilation unit; incorrect wiring connection; faulty unit.	Ensure power is restored to the ventilation unit at the circuit breaker. Check the two-wire connection at the control and the ventilation unit. Although not polarity sensitive, ensure the connector is fully seated and try reversing its orientation if necessary. If the issue persists, contact Fantech support.
Incorrect temperature/humidity readings.	Sensor obstruction; unit malfunction.	Ensure the control is not exposed to direct sunlight, drafts, or heat sources that could affect readings. Verify settings for Fahrenheit/Celsius. If readings remain inaccurate, contact Fantech support.
Ventilation unit not responding to control.	Communication error; ventilation unit issue.	Check wiring connections between the control and the ventilation unit. Refer to the ventilation unit's manual for its own troubleshooting steps. Look for any error codes displayed on the ECO-Touch screen and consult the Fantech documentation for their meaning.

For issues not covered here, or if troubleshooting steps do not resolve the problem, please contact Fantech customer support.

Imininingwane

Isici	Imininingwane
Inombolo Yemodeli	ECOTouch
Ubukhulu (Umkhiqizo)	5.4 x 4.4 x 1.5 Inches (approx. 13.7 x 11.2 x 3.8 cm)
Isisindo	4.8 Ounces (approx. 136 g) / 173 g (from specifications)
Bonisa	2 x 3 inch (5.08 cm x 7.62 cm) LCD backlit touch screen
Umthombo wamandla	AC (powered by ventilation unit)
Iphrothokholi Yezokuxhumana	Proprietary two-wire (not polarity sensitive)
Isibonisi Sezinga lokushisa	I-Fahrenheit noma i-Celsius
Ukubonisa Umswakama	Umswakama ohlobene endlini
Ibhethri	Akukho okudingekayo
Ukuhambisana	Fantech SHR/VHR (HRV), SER (ERV), and FLEX Series units

Iwaranti kanye Nokusekela

For information regarding the warranty of your Fantech ECO-Touch control, please refer to the warranty documentation provided with your Fantech ventilation unit or visit the official Fantech webindawo. Imigomo nemibandela yesiqiniseko ingahluka.

If you require technical assistance, have questions about installation, operation, or troubleshooting, please contact Fantech customer support directly. Contact information can typically be found on the Fantech website or in the packaging of your product.

Fantech Official Webindawo: www.senzokme (Note: This is a generic link, actual support link may vary by region)