ViewIncwadi Yomsebenzisi Yephrojektha ye-Sonic PJD5133 SVGA DLP

1. Isingeniso

I ViewSonic PJD5133 is a high-performance SVGA 800x600 DLP projector designed for various environments, including classrooms and corporate offices. It features 2700 ANSI lumens and a 3000:1 contrast ratio, providing clear and bright images. Its slim and lightweight design enhances portability, making it suitable for both tabletop use and ceiling mounting. This manual provides essential information for setting up, operating, and maintaining your projector.

2. Izici Eziyinhloko

• Ubuchwepheshe Bokubonisa: SVGA 800x600 DLP projector.
• Ukukhanya: 2700 ANSI lumens for clear images.
• Isilinganiso sokuqhathanisa: 3000:1 dynamic contrast ratio.
• Ukuxhumana: HDMI, dual RGB in, composite, S-video, RGB out, audio in/out, RS232. Supports HD 720p and 1080i/p via HDMI.
• Ukulungiswa Kwesithombe: 1.1x manual optical zoom, vertical keystone correction (+/- 40°).
• Amandla we-3D: 120Hz/3D-ready with DLP® Link Technology (requires compatible glasses and optional 3D processor).
• Umsindo: Integrated 1W speaker.
• Ukusebenza kahle kwamandla: ECO mode for extended lamp life and reduced power consumption.
• Ukunakekela: Filter-less design for simplified upkeep.
• Ukuphatheka: Lightweight (5.7 lbs) and slim design (3.2 inches height).

3. Yini EseBhokisini

Qinisekisa ukuthi zonke izinto zikhona kuphakheji:

• ViewSonic PJD5133 Projector
• Ikhebula lamandla
• Ikhebula le-VGA
• Remote control with batteries (2 AA batteries included)
• Quick Start Guide
• ViewI-CD ye-Sonic Wizard (enomhlahlandlela womsebenzisi)

4. Umkhiqizo Uphelileview

Umfanekiso 1: Ngaphambili view kwe ViewSonic PJD5133 projector, showing the lens and ventilation grilles.

Umfanekiso 2: I-engeli view kwe ViewSonic PJD5133 projector, highlighting its compact design and input panel area.

5. Setha

5.1 Ukubekwa

Position the projector on a stable, flat surface for tabletop use, or securely mount it to the ceiling. Ensure adequate ventilation around the projector to prevent overheating. The projection distance will determine the image size; refer to the specifications for throw ratio details.

5.2 Ukuxhumanisa Amadivayisi

1. Ukuxhuma kwamandla: Connect the power cable to the projector's power inlet and then to an electrical outlet.
2. Umthombo wevidiyo:
   • I-HDMI: For digital video and audio, connect an HDMI cable from your source device (e.g., Blu-ray player, laptop) to the projector's HDMI port.
   • VGA: For analog video, connect a VGA cable from your computer to one of the projector's RGB IN ports.
   • S-Video/Composite: For standard definition video sources, use the S-Video or Composite video input ports.
3. Umthombo womsindo: If using VGA or other analog video inputs, connect an audio cable from your source device to the projector's Audio In port. The projector has an integrated speaker.
4. Control (Optional): For remote control via a computer, connect an RS232 cable to the projector's RS232 port.

6. Iziqondiso Zokusebenza

6.1 Ukuvula / Ukuvula

• Vula: Press the power button on the projector or the remote control. The power indicator light will turn blue.
• Cisha ugesi: Press the power button twice. The projector will enter a cooling cycle before shutting down completely.

6.2 Ukulungiswa Kwesithombe

• Gxila: Rotate the focus ring on the projector lens until the image is sharp and clear.
• Sondeza: Adjust the zoom ring on the projector lens to increase or decrease the image size.
• Ukulungiswa kwetshe elingukhiye: If the image appears trapezoidal, use the keystone correction function (usually via the remote or on-screen menu) to adjust the image geometry vertically.

6.3 Ukukhetha Umthombo Wokufaka

Press the 'Source' button on the remote control or projector control panel to cycle through available input sources (HDMI, VGA, S-Video, Composite). The projector also features auto source detection.

6.4 Imodi ye-ECO

Activate ECO mode via the projector's menu or remote control to reduce lamp brightness slightly, extend lamp life, and lower power consumption and fan noise. This mode is recommended for environments where maximum brightness is not essential.

6.5 Ukusebenza kwe-3D

The PJD5133 is 3D-ready, supporting 120Hz refresh rates via DLP Link Technology. To experience 3D content, you will need DLP Link compatible active shutter glasses (e.g., ViewSonic PGD-250, sold separately) and potentially a 3D video processor (e.g., ViewSonic VP3D1, sold separately) to convert 3D HD formats.

7. Isondlo

7.1 Filter-less Design

The projector features a filter-less design, eliminating the need for regular air filter cleaning or replacement, which simplifies maintenance and reduces total cost of ownership.

7.2 Lamp Impilo

Iphrojektha lamp has an estimated life of 5000 hours in normal mode and up to 6000 hours in ECO mode. To maximize lamp life, use ECO mode whenever possible and ensure proper ventilation.

7.3 Ukuhlanza

• Ingaphandle: Use a soft, dry cloth to clean the projector's casing. For stubborn marks, dampen indwangu kancane ngamanzi. Gwema amakhemikhali anokhahlo.
• Ilensi: Gently wipe the lens with a lens cleaning cloth or a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive materials.

8. Ukuxazulula izinkinga

Uma uhlangabezana nezinkinga ngephrojektha yakho, bheka izinkinga nezixazululo ezilandelayo ezivamile:

• Akukho sithombe esikrinini:
  • Ensure the projector is powered on and the power indicator is blue.
  • Verify that the video cable (HDMI, VGA) is securely connected to both the projector and the source device.
  • Select the correct input source using the 'Source' button on the remote or projector.
  • Check the source device's display settings to ensure it is outputting video.
• Isithombe sifiphele:
  • Lungisa indandatho yokugxila kulensi yeprojektha.
  • Qinisekisa ukuthi i-projection surface iphansi futhi iprojektha izinzile.
• Image is Trapezoidal:
  • Use the keystone correction function to adjust the image geometry.
  • Ensure the projector is positioned perpendicular to the screen as much as possible.
• Awukho Umsindo:
  • If using HDMI, ensure the source device is sending audio via HDMI.
  • If using VGA, ensure an audio cable is connected from the source to the projector's Audio In port.
  • Check the projector's volume settings and ensure it is not muted.
• Isilawuli kude asisebenzi:
  • Qinisekisa ukuthi azikho izithiyo phakathi kwesilawuli kude kanye nesamukeli se-IR sephrojektha.
  • Shintsha amabhethri kusilawuli kude.

9. Imininingwane

10. Iwaranti kanye Nokusekela

10.1 Ulwazi Lwewaranti

I ViewSonic PJD5133 projector is backed by a comprehensive warranty:

• Izingxenye kanye Nemisebenzi: Iwaranti ekhawulelwe yeminyaka emi-3.
• Lamp: Iwaranti ekhawulelwe yeminyaka emi-1.
• Express Exchange Service: Free 1st year Express Exchange® service (requires product registration).

For complete details regarding warranty terms and conditions, please refer to the documentation included with your product or visit the official ViewSonic webindawo.

10.2 Ukwesekwa Kwezobuchwepheshe

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact ViewSonic customer support. Contact information and support resources can typically be found on the official ViewSonic webisiza (www.viewsonic.com).