Incwadi Yomsebenzisi Yephrojektha Ye-DLP Ephathekayo ye-InFocus IN112

1. Isingeniso

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Yini EseBhokisini

Qinisekisa ukuthi zonke izinto ezibalwe ngezansi zifakiwe ephaketheni lomkhiqizo wakho:

• InFocus IN112 Projector
• Intambo yamandla
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Imiyalo yokuphepha
• Incwadi yomsebenzisi (le dokhumenti)
• Isilawuli kude

3. I-Projector Overview

Umfanekiso 1: Phezulu View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Umfanekiso 2: Uhlangothi View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Umfanekiso 3: I-engeli View nesilawuli kude - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Umfanekiso 4: Ngemuva View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Setha

4.1 Ukubekwa

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Ukuxhuma Amandla

1. Connect the supplied power cord to the projector's power inlet.
2. Xhuma enye ingxenye yentambo yamandla endaweni kagesi esekelwe phansi.

4.3 Ukuxhumanisa Imithombo Yokokufaka

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Ividiyo Ehlanganisiwe: Use the A/V cable to connect to devices with composite video output.
• I-S-Video: Connect to devices with S-Video output.
• Umsindo Ku: Connect external audio sources using a 3.5mm stereo cable.
• I-RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Ensure all cables are securely connected before powering on the projector.

5. Iziqondiso Zokusebenza

5.1 Vula/Vala amandla

• Ukuze uvule, cindezela inkinobho Amandla button on the control panel or remote control. The power indicator light will illuminate.
• Ukucisha, cindezela inkinobho Amandla button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2 Ukulungiswa Kwesithombe

• Gxila: Zungezisa indandatho yokugxila kulensi yephrojektha kuze kube yilapho isithombe sicacile futhi sicacile.
• Itshe elingukhiye: Sebenzisa i- Itshe elingukhiye buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Ukukhethwa Komthombo

Cindezela inkinobho Umthombo button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Ukuzulazula kwemenyu

Cindezela inkinobho Imenyu/Phuma button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Khetha or Ngena inkinobho ukuqinisekisa izinketho. Cindezela Imenyu/Phuma futhi ukuvala imenyu.

Imodi ye-5.5 Eco

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Isondlo

6.1 Lamp Ukushintshwa

Iphrojektha lamp inesikhathi sokuphila esilinganiselwe. Lapho i-lamp inkomba (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Isexwayiso: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Ukuhlanza

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Ukuxazulula izinkinga

8. Imininingwane

9. Iwaranti kanye Nokusekela

9.1 Iwaranti Yomkhiqizo

The InFocus IN112 projector is backed by a comprehensive warranty:

• Iwaranti ekhawulelwe yeminyaka engu-5 kuprojektha.
• Iwaranti ephelele yonyaka ongu-2 ukumboza izingxenye kanye nomsebenzi.
• Iwaranti yezinyanga eziyi-6 kwe lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus webindawo.

9.2 Ukwesekwa Kwezobuchwepheshe

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official webisayithi noma kumadokhumenti afakiwe.

10. Related Product Information (IN130 Series)

Ividiyo elandelayo inikeza i-overview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.