1. Isingeniso
This manual provides essential information for the safe and efficient operation of your Steinbach SPS 75-1 Filter Pump. This self-priming pump is designed for use with pool filter systems, capable of handling pools up to 33,000 liters. It features a robust 230 V/450 W motor and a pump capacity of 8,520 liters per hour (142 l/min).
Sicela ufunde le ncwadi ngokucophelela ngaphambi kokufakwa nokusebenza ukuqinisekisa ukusetshenziswa okufanele nokuvimbela umonakalo kuyunithi noma ukulimala.
2. Iziyalezo Zokuphepha
Ngaso sonke isikhathi qaphela lezi zinyathelo zokuphepha ezilandelayo ukuze unciphise ingozi yomlilo, ukushaqeka kukagesi, noma ukulimala.
- Ukuphepha Kagesi: Ensure the pump is connected to a properly grounded outlet. Do not operate the pump with a damaged power cord or plug. Disconnect power before performing any maintenance or service.
- Izinga Lokushisa Lamanzi: The pump is designed for a maximum water temperature of 35°C (95°F). Operating above this temperature can cause damage to the pump.
- Ukubekwa: Install the pump on a stable, level surface, away from direct sunlight and excessive moisture. Ensure adequate ventilation around the motor.
- Izingane Nezilwane ezifuywayo: Keep children and pets away from the pump during operation.
- Ukunakekela: Only perform maintenance as described in this manual. For complex repairs, consult a qualified technician.
3. Setha
Follow these steps for proper installation of your filter pump.
- Ukukhulula: Carefully remove all components from the packaging. Inspect the pump for any signs of damage during transit.
- Ukubekwa: Position the pump as close to the pool as possible, ensuring it is below the water level for optimal self-priming. The pump should be on a firm, level surface to prevent vibration.
- Izixhumanisi zeHose: Connect the pool hoses to the pump's inlet and outlet ports. The pump supports hose diameters of 32mm and 38mm. Ensure all connections are tight to prevent leaks and maintain prime.
Umfanekiso 3.1: Vala-up view of the pre-filter inlet with a hose connection, showing the clear cover and filter basket.
Figure 3.2: The pre-filter inlet without a hose attached, illustrating the threaded connection for secure fitting.
Figure 3.3: The pump's outlet connection with a hose securely fastened, ready for water discharge.
Figure 3.4: The pump's outlet port, showing the internal threading for hose attachment.
Figure 3.5: An overall perspective of the Steinbach SPS 75-1 Filter Pump, highlighting its compact design and key components.
- Ukufaka ipompo: As a self-priming pump, it will draw water once connected. However, for initial startup, it is recommended to fill the pre-filter housing with water to assist in faster priming.
- Uxhumano lukagesi: Plug the pump into a suitable 230V electrical outlet. Ensure the circuit is protected by a Residual Current Device (RCD) for safety.
4. Iziqondiso Zokusebenza
Once installed, operating the pump is straightforward.
- Ukuqala i-Pump: Turn on the power supply to the pump. The pump will begin to draw water and circulate it through your filter system.
- Ukuqapha: Observe the pump during its initial operation to ensure there are no leaks and that water is flowing correctly. The pump operates at approximately 70 dB.
- Ukumisa Iphampu: Vala ukunikezwa kwamandla epompo.
- Isikhathi Sokuqalisa: The optimal run time for your pump depends on your pool size and usage. For a 33,000-liter pool, ensure sufficient daily filtration to maintain water clarity.
5. Isondlo
Regular maintenance ensures the longevity and efficiency of your pump.
- Ukuhlanza Ngaphambi Kokuhlunga: The pump is equipped with a pre-filter to catch larger debris. Regularly inspect and clean the pre-filter basket. To do this, turn off the pump, disconnect power, unscrew the clear lid, remove the basket, clean it, and reassemble. Ensure the O-ring is properly seated for a watertight seal.
- Ukwenza ubusika: Before freezing temperatures, drain all water from the pump and hoses. Store the pump in a dry, frost-free location.
- Ukuhlanza Okujwayelekile: Keep the exterior of the pump clean and free from dirt and debris. Do not use harsh chemicals.
6. Ukuxazulula izinkinga
If you encounter issues with your pump, refer to the following common problems and solutions.
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Ipompo ayiqali | Akukho ukunikezwa kwamandla Ukugcwala kwezimoto I-impeller ijamekile | Hlola ukuxhumeka kwamandla kanye ne-circuit breaker Allow motor to cool, check for obstructions Inspect and clear impeller |
| Ukugeleza kwamanzi aphansi | Isihlungi sangaphambilini esivinjelwe Ukuvuza komoya kulayini wokumunca Izinga lamanzi aphansi echibini | Clean pre-filter basket Hlola konke ukuxhumana ukuze kuqine Add water to pool |
| Iphampu linomsindo | Umoya kusistimu Ukudlidliza Ama-bearings agugile | Wopha umoya ohlelweni, hlola ukuvuza Qinisekisa ukuthi iphampu isendaweni ezinzile Xhumana nochwepheshe abaqeqeshiwe |
| Iphampu ilahlekelwa ubukhulu | Ukuvuza komoya kulayini wokumunca Izinga lamanzi aphansi Isihlungi sangaphambilini esivinjelwe | Check all connections and O-rings Ensure adequate water level Clean pre-filter basket |
If the problem persists after attempting these solutions, please contact customer support or a qualified service technician.
7. Imininingwane
Technical data for the Steinbach SPS 75-1 Filter Pump.
Figure 7.1: Product label detailing the pump's electrical and performance specifications.
Figure 7.2: Dimensional drawing of the pump, indicating height, width, and length.
| Ipharamitha | Inani |
|---|---|
| Inombolo Yemodeli | 040920 |
| Voltage | 230 V |
| Amandla | 450 W |
| Umthamo Wephampu | 8,520 l/h (142 l/min) |
| Max. Pump Height | 9 m |
| Ububanzi boxhumano | 32/38 mm |
| Izinga Lokushisa Lamanzi Eliphezulu | 35°C |
| Maximum Pool Size | 33,000 amalitha |
| Izinga Lomsindo | Cishe. awu 70db |
| Ubukhulu bomkhiqizo (L x W x H) | 45 x 20.5 x 25 cm |
| Isisindo sento | 6 kg |
| Okubalulekile | Ipulasitiki |
| Umthombo wamandla | I-Corded Electric |
8. Iwaranti kanye Nokusekela
Specific warranty details for this product are not provided in this manual. Please refer to your purchase documentation or the manufacturer's official webisayithi lemininingwane yewaranti.
For technical support, spare parts, or service inquiries, please contact Steinbach customer service through their official channels. Always provide your product model number (040920) and purchase date when seeking support.
