Okuqukethwe fihla
1 I-ARDUINO DHT11 Starter Kit
2 Imininingwane
3 Isitoreji se-LED kanye nohlelo lwesikrini
4 Uhlelo lwe-Passive Buzzer
5 Uhlelo Lwenzwa Yokushisa Nomswakama
6 Uhlelo Lokwamukela Isilawuli kude se-infrared
7 Photoresistor Futhi Inkinobho Uhlelo
8 FAQ
9 Amadokhumenti / Izinsiza
9.1 Izithenjwa

I-ARDUINO-LOGO

I-ARDUINO DHT11 Starter Kit

I-ARDUINO-DHT11-Starter-Kit-product

Imininingwane

  • Isifundo 1: Uhlelo lwe-EEPROM Storage
  • Isifundo 2: 0.96in Uhlelo Lwesikrini se-LED
  • Isifundo 3: Uhlelo lwe-MPU6050 lwe-Six-Axis Gyroscope
  • Isifundo 4: Uhlelo lwe-Passive Buzzer
  • Isifundo 5: Uhlelo lwe-DH11 Yezinzwa Zokushisa Nomswakama
  • Isifundo 6: Uhlelo Lokwamukela Isilawuli kude se-infrared
  • Isifundo 7: Uhlelo lwe-Photoresistor

Isitoreji se-LED kanye nohlelo lwesikrini

Isifundo 1:Uhlelo lwe-EEPROM Storage:

  • Chofoza i-Sketch ku-Arduino IDE, khetha okuthi Phatha ilabhulali kokuthi Faka phakathi Ilabhulali, sesha i-AT24C256_library, bese uchofoza Faka.I-ARDUINO-DHT11-Starter-Kit-FIG-1
  • Chofoza File ku-Arduino IDE, bese ukhetha read_wirte ku-AT24C256_library kusuka ku-ExampLes.
  • Chofoza okuthi Layisha, bese uchofoza I-Serial Monitor ekhoneni eliphezulu kwesokudla se-IDE.

Isifundo 2: 0.96in Uhlelo Lwesikrini Se-LED:

  1. Chofoza i-Sketch ku-Arduino IDE, khetha okuthi Phatha Ilabhulali ku-Inter Library, sesha i-U8glib, khetha i-U8glib bese uchofoza Faka.I-ARDUINO-DHT11-Starter-Kit-FIG-2
  2. Chofoza File ku-Arduino IDE bese ukhetha i-FPS ku-U8glib ku-EksampLes.
    • Thola / / U8GLIB_SSD1306_128X64 u8g (U8G_I2C_OPT_NONE | U8G_I2C_OPT_DEV_0); // Ikhodi ye-I2C/TWI, susa ukungaphawuli okuthi “//”, chofoza okuthi Layisha ekhoneni eliphezulu kwesokunxele.I-ARDUINO-DHT11-Starter-Kit-FIG-3

Isifundo 3: Uhlelo lwe-MPU6050 Six-Axis Gyroscope:

  1. Chofoza i-Sketch ku-Arduino IDE, khetha okuthi Phatha Ilabhulali kokuthi Faka phakathi Ilabhulali, sesha i-Adafruit_MPU6050, bese uchofoza Faka.I-ARDUINO-DHT11-Starter-Kit-FIG-4
  2. Chofoza File ku-IDE ye-Arduino bese ukhetha i-basic_readings ku-Adafruit_MPU6050 ku-EksampLes.
  3. Chofoza okuthi Layisha, chofoza I-serial Monitor ekhoneni eliphezulu kwesokudla se-IDE, bese ushintsha usuke ku-9600baud uye ku-115200baud.I-ARDUINO-DHT11-Starter-Kit-FIG-5
  4. Ngoba amanani okuqala azo zonke izimbazo ze-MPU-6050 awakwazi ukuhambisana, lapho izimbazo zika-X kanye no-Y ze-Acceleration zingalingani no-0 m/^2 kanye nezimbazo ezingu-Z azilingani no-9.8 m/^2, kanye no-X, Y kanye no-Z. Yokuzungezisa ayilingani no-0rad/s, ungakhuphula noma unciphise amanani amaphutha ngohlelo. Yenza inani lokuqala lokuphumayo lilingane.

Uhlelo lwe-Passive Buzzer

Isifundo 4: Uhlelo lwe-Passive Buzzer:

I-ARDUINO-DHT11-Starter-Kit-FIG-6

Uhlelo Lwenzwa Yokushisa Nomswakama

Isifundo 5: Uhlelo lwe-DH11 Temperature and Humidity Sensor:

  1. Chofoza i-Sketch ku-Arduino IDE, khetha okuthi Phatha Ilabhulali kokuthi Faka phakathi Ilabhulali, sesha i-DHT11, khetha DFRobot_DHT11, bese uchofoza Faka.I-ARDUINO-DHT11-Starter-Kit-FIG-7
  2. Chofoza File ku-Arduino IDE, bese ukhetha fundaDHT11 kokuthi DFRRobot_DHT11 ku-ExampLes.
  3. Shintsha okuthi #define DHT11_PIN 10 ukuze #define DHT11_PIN3 bese uchofoza IDE ikhasi lasekhaya Layisha.I-ARDUINO-DHT11-Starter-Kit-FIG-8
  4. Chofoza i-Serial Monitor ekhoneni eliphezulu kwesokudla se-IDE bese ushintsha i-9600baud iye ku-115200baud. Linda cishe i-1S ukuze uthole izinga lokushisa lamanje nomswakama.I-ARDUINO-DHT11-Starter-Kit-FIG-9

Uhlelo Lokwamukela Isilawuli kude se-infrared

Isifundo 6: Uhlelo Lokwamukela Isilawuli kude se-infrared

  1. Chofoza i-Sketch ku-Arduino IDE, khetha okuthi Phatha Ilabhulali kokuthi Faka phakathi Ilabhulali, sesha i-IRremote, bese uchofoza Faka.I-ARDUINO-DHT11-Starter-Kit-FIG-10
  2. Chofoza File ku-Arduino IDE bese ukhetha okuthi ReceiveDemo kusuka ku-IRremote ku-EksampLes.
  3. Chofoza okuthi Layisha, chofoza I-serial Monitor ekhoneni eliphezulu kwesokudla se-IDE, bese ushintsha usuke ku-9600baud uye ku-115200baud. Sebenzisa isilawulikude esihambelanayo ukuze uqondanise imojuli yokwamukela ngeso lefoni bese ucindezela noma iyiphi inkinobho. Uma idatha ehambisanayo ivela, imojuli izosebenza ngokujwayelekile.I-ARDUINO-DHT11-Starter-Kit-FIG-11

Photoresistor Futhi Inkinobho Uhlelo

Isifundo 7: Uhlelo lwe-Photoresistor:

I-ARDUINO-DHT11-Starter-Kit-FIG-12

Isifundo 8: Uhlelo lwenkinobho:

I-ARDUINO-DHT11-Starter-Kit-FIG-13

FAQ

Umbuzo Ovame ​​Ukubuzwas

  • Q: Ngiyixazulula kanjani inkinga uma uhlelo lwami lungasebenzi?
    • IMP: Hlola uxhumano ukuze uqinisekise ukuthi lusethwe kahle. Qinisekisa ukuthi amalabhulali afakwe kahle ku-Arduino IDE. Qiniseka ukuthi ikhodi ayinaphutha futhi ifana nemiyalelo enikezwe kumanuwali.

Amadokhumenti / Izinsiza

I-ARDUINO DHT11 Starter Kit [pdf] Umhlahlandlela Womsebenzisi
DHT11, DHT11 Starter Kit, Starter Kit, Kit

Izithenjwa

Shiya amazwana

Ikheli lakho le-imeyili ngeke lishicilelwe. Izinkambu ezidingekayo zimakiwe *