I-Arduino ABX00071 Nano 33 BLE Module
Imininingwane
- Igama Lomkhiqizo: I-Arduino Nano 33 BLE Rev2
- I-SKU: ABX00071
- Iphrosesa: I-Cortex M4F esekelwe ku-Nordic nRF52480
- IMU: I-BMI270 6-axis IMU (Accelerometer and Gyroscope), BMM150 3-axis IMU (Magnetometer)
- Ukuxhumana okungenantambo: I-NINA B306 Module enokusekelwa komsakazo we-IEEE 802.15.4, Thread, Zigbee
- I-DC-DC Regulator: I-MP2322, ivolumu yokufakatage kufika ku-21V, ukusebenza kahle ngaphezu kuka-85% @12V
Imiyalo yokusetshenziswa komkhiqizo
Ukusebenza kwebhodi
Ukuze uqalise nge-Arduino Nano 33 BLE Rev2, landela lezi zinyathelo:
- I-IDE: Qala ngokusetha i-Integrated Development Environment (IDE).
- I-Arduino Web Umhleli: Ngaphandle kwalokho, ungasebenzisa i-Arduino Web Umhleli wokuhlela.
- I-Arduino IoT Cloud: Hlola izinketho zokuxhuma zamafu zamaphrojekthi akho e-IoT.
- Sample Sketches: Finyelela imidwebo eyakhiwe ngaphambilini ukuze uhlolwe ngokushesha nokufunda.
- Izinsiza eziku-inthanethi: Bheka imibhalo eku-inthanethi nezinkundla zomphakathi ukuze uthole ukwesekwa.
- Ukutholwa Kwebhodi: Uma kukhona noma yiziphi izinkinga, funda ukuthi ungalibuyisela kanjani ibhodi lakho.
Ama-Pinout wokuxhuma
Qonda izixhumi ezahlukene ebhodini:
- I-USB: Sebenzisa uxhumano lwe-USB ukuhlela kanye namandla.
- Izihloko: Xhuma amadivaysi angaphandle noma izingxenye usebenzisa izihloko.
- Susa iphutha: Sebenzisa imbobo yokususa iphutha ukuze uxazulule izinkinga nokuqapha.
Ulwazi Lwemishini
- Funda mayelana nokucaciswa ngokomzimba kwebhodi:
- Uhlaka Lwebhodi: Qonda ubukhulu nezimbobo ezifakwayo zebhodi.
FAQ
- Q: Ngingakwazi ukusebenzisa amasiginali we-5V nge-Arduino Nano 33 BLE Rev2?
- A: Cha, ibhodi lisekela kuphela i-3.3VI/Os futhi alikwazi ukubekezela ku-5V. Ukuxhuma amasignali angu-5V ngokuqondile kungalimaza ibhodi.
- Q: Ngiyisebenzisa kanjani i-Arduino Nano 33 BLE Rev2?
- A: Unganika amandla ibhodi nge-USB noma izihloko. Ibhodi ayinayo ishaja yebhethri eyakhelwe ngaphakathi.
Incazelo
I-Arduino Nano 33 BLE Rev2* iyimojuli yosayizi omncane equkethe imojuli ye-NINA B306, esekelwe ku-Nordic nRF52480 futhi iqukethe i-Cortex M4F. I-BMI270 ne-BMM150 ngokuhlanganyela zihlinzeka nge-IMU ye-9-axis. Imojuli ingase ikhwezwe njengengxenye ye-DIP (uma ukhweza izihloko zamaphini) noma njengengxenye ye-SMT, ihlanganiswe ngokuqondile ngamaphedi ane-castelated.
Umkhiqizo we-Arduino Nano 33 BLE Rev2 unama-SKU amabili:
- Ngaphandle kwamaheda (ABX00071)
- Ngamaheda (ABX00072)
Izindawo ezihlosiwe
- Umenzi, izithuthukisi, uhlelo lokusebenza lwe-IoT
Izici
I-NINA B306 Module
- Iphrosesa
- 64 MHz Arm® Cortex®-M4F (nge-FPU)
- 1 MB Flash + 256 KB RAM
I-Bluetooth® 5 umsakazo we-multiprotocol
- 2 Mbps
- I-CSA #2
- Ukukhangisa Izandiso
- Ibanga elide
- +8 dBm TX amandla
- -95 dBm ukuzwela
- 4.8 mA ku-TX (0 dBm)
- 4.6 mA ku-RX (1 Mbps)
- I-balun ehlanganisiwe eno-50 Ω okukhiphayo okukuphela kwesikhathi
- Ukusekelwa komsakazo we-IEEE 802.15.4
- Uchungechunge
- Zigbee
Amapheripheral
- Isivinini esigcwele 12 Mbps USB
- I-NFC-A tag
- Isistimu yokuphepha ye-Arm CryptoCell CC310
- I-QSPI/SPI/TWI/I²S/PDM/QDEC
- Isivinini esikhulu esingu-32 MHz SPI
- I-Quad SPI interface 32 MHz
- I-EasyDMA yazo zonke izixhumanisi zedijithali
- 12-bit 200 ksps ADC
- 128-bit AES/ECB/CCM/AAR co-processor
I-BMI270 I-6-axis IMU (I-Accelerometer ne-Gyroscope)
- 16-bit
- I-accelerometer ye-3-eksisi enobubanzi obungu ±2g/±4g/±8g/±16g
- I-gyroscope ye-3-axis ene-±125dps/±250dps/±500dps/±1000dps/±2000dps ububanzi
I-BMM150 3-axis IMU (Magnetometer)
- Inzwa ye-geomagnetic yedijithali engu-3-eksisi
- 0.3μT ukulungiswa
- ±1300μT (x,y-eksisi), ±2500μT (z-eksisi)
I-MP2322 DC-DC
- Ilawula ivolumu yokufakatage isuka kokufika ku-21V enobuncane be-65% ukusebenza kahle @umthamo omncane
- Ukusebenza kahle okungaphezulu kuka-85% @12V
Ibhodi
Njengawo wonke amabhodi we-Nano form factor, i-Nano 33 BLE Rev2 ayinayo ishaja yebhethri kodwa inganikwa amandla nge-USB noma ngezihloko.
QAPHELA: I-Arduino Nano 33 BLE Rev2 isekela kuphela i-3.3VI/Os futhi AYIKUbekezeleli i-5V ngakho-ke sicela uqiniseke ukuthi awuwaxhumi ngokuqondile amasignali e-5V kuleli bhodi noma izolimala. Futhi, ngokungafani namabhodi e-Arduino Nano asekela ukusebenza kwe-5V, iphinikhodi ye-5V AYInikezeli ivolumu.tage kodwa kunalokho ixhunywe, nge-jumper, kokokufaka kwamandla e-USB.
Izilinganiso
Izimo Zokusebenza Ezinconyiwe
| Uphawu | Incazelo | Okuncane | Ubukhulu |
| Imikhawulo yokushisa elondolozayo yalo lonke ibhodi: | -40 °C ( 40 °F) | 85°C ( 185 °F) |
Ukusetshenziswa kwamandla
| Uphawu | Incazelo | Okuncane | Thayipha | Ubukhulu | Iyunithi |
| I-PBL | Ukusetshenziswa kwamandla nge-loop ematasa | I-TBC | mW | ||
| I-PLP | Ukusetshenziswa kwamandla kumodi yamandla aphansi | I-TBC | mW | ||
| I-PMAX | Ukusetshenziswa kwamandla okuphezulu | I-TBC | mW |
Isebenza Ngaphezuluview
I-Topology yebhodi
Phezulu
| Ref. | Incazelo | Ref. | Incazelo |
| U1 | I-NINA-B306 Imojula ye-Bluetooth® Amandla Aphansi 5.0 Imojuli | U6 | MP2322GQH Step Down Converter |
| U2 | Inzwa ye-BMI270 IMU | PB1 | Inkinobho ye-IT-1185AP1C-160G-GTR |
| U7 | I-BMM150 Magnetometer IC | DL1 | U-Led L |
Phansi
| Ref. | Incazelo | Ref. | Incazelo |
| SJ1 | I-VUSB Jumper | SJ2 | I-D7 Jumper |
| Ref. | Incazelo | Ref. | Incazelo |
| SJ3 | 3v3 iJumper | SJ4 | I-D8 Jumper |
Iphrosesa
I-Main processor iyi-Arm® Cortex®-M4F egijima kufika ku-64MHz. Iningi lezikhonkwane zalo lixhunywe kumaheda angaphandle nokho amanye abekelwe ukuxhumana kwangaphakathi nemojula engenantambo kanye nama-peripherals e-I2C angaphakathi ebhodini (IMU kanye ne-Crypto).
QAPHELA: Ngokuphambene namanye amabhodi e-Arduino Nano, izikhonkwane ze-A4 ne-A5 zinokudonsa kwangaphakathi nokuzenzakalelayo okufanele zisetshenziswe njenge-I2C Bus ngakho-ke ukusetshenziswa njengokufakwa kwe-analog akunconywa.
IMU
I-Arduino Nano 33 BLE Rev2 ihlinzeka ngamakhono e-IMU nge-9-eksisi, ngenhlanganisela ye-BMI270 kanye ne-BMM150 ICs. I-BMI270 ihlanganisa kokubili i-gyroscope ene-axis emithathu kanye ne-accelerometer yama-axis amathathu, kuyilapho i-BMM150 ikwazi ukuzwa ukuhlukahluka kwe-magnetic field kuzo zonke izinhlangothi ezintathu. Ulwazi olutholiwe lungasetshenziselwa ukukala amapharamitha wokunyakaza okungavuthiwe kanye nokufunda komshini.
Isihlahla Samandla
Ibhodi lingenziwa amandla ngesixhumi se-USB, i-VIN noma izikhonkwane ze-VUSB kumaheda.
QAPHELA: Njengoba i-VUSB iphakela i-VIN nge-Schottky diode kanye nesilawuli se-DC-DC esishiwo ubuncane bevolthi yokufakatagi-e ingu-4.5V ubuncane bomthamo wokunikezwayotagi-e isuka ku-USB kufanele inyuswe ibe yivolumutage ebangeni eliphakathi kuka-4.8V ukuya ku-4.96V kuye ngokuthi dwetshwa manje.
Umdwebo weBlock
Ukusebenza kwebhodi
Ukuqalisa - IDE
Uma ufuna ukuhlela i-Arduino Nano 33 BLE Rev2 yakho ngenkathi ungaxhunyiwe ku-inthanethi udinga ukufaka i-Arduino Desktop IDE [1] Ukuze uxhume i-Arduino Nano 33 BLE Rev2 kukhompyutha yakho, uzodinga intambo ye-USB ye-Micro-B. Lokhu futhi kunikeza amandla ebhodini, njengoba kuboniswe yi-LED.
Ukuqala - Arduino Web Mhleli
- Wonke amabhodi e-Arduino, okuhlanganisa naleli, asebenza ngaphandle kwebhokisi ku-Arduino Web Mhleli, ngokufaka nje i-plugin elula.
- I-Arduino Web Umhleli usingathwa ku-inthanethi, ngakho-ke uzohlala usesikhathini samanje ngezici zakamuva nokusekelwa kwawo wonke amabhodi. Landela ukuze uqale ukubhala amakhodi esipheqululini futhi ulayishe imidwebo yakho ebhodini lakho.
Ukuqalisa - I-Arduino IoT Cloud
Yonke imikhiqizo enikwe amandla i-Arduino IoT isekelwa ku-Arduino IoT Cloud ekuvumela ukuthi Ungene, udwebe futhi uhlaziye idatha yezinzwa, ucuphe imicimbi, futhi wenze ikhaya lakho noma ibhizinisi lakho libe ngokuzenzakalela.
Sample Sketches
Sampimidwebo ye-Arduino Nano 33 BLE Rev2 ingatholakala ku-“Eksamples” kumenyu ye-Arduino IDE noma esigabeni esithi “Documentation” se-Arduino Pro webindawo.
Izinsiza eziku-inthanethi
Manje njengoba usudlule ezintweni eziyisisekelo zalokho ongakwenza ngebhodi ungakwazi ukuhlola amathuba angapheli eliwanikezayo ngokubheka amaphrojekthi ajabulisayo ku-ProjectHub, i-Arduino Library Reference kanye nesitolo se-inthanethi lapho uzokwazi ukugcwalisa ibhodi lakho ngezinzwa. , ama-actuator nokuningi.
Ukubuyiselwa Kwebhodi
Wonke amabhodi e-Arduino ane-bootloader eyakhelwe ngaphakathi evumela ukukhanya kwebhodi nge-USB. Uma umdwebo uvala iphrosesa futhi ibhodi lingasatholakali nge-USB ungakwazi ukufaka imodi ye-bootloader ngokuthepha kabili inkinobho yokusetha kabusha ngemva kokunika amandla ibhodi.
Ama-Pinout wokuxhuma
I-USB
| Phina | Umsebenzi | Uhlobo | Incazelo |
| 1 | I-VUSB | Amandla | Okokufaka Kokunikezela Amandla. Uma ibhodi linikwa amandla nge-VUSB kusuka enhlokweni lokhu kungukuphumayo (1) |
| 2 | D- | Umehluko | Idatha ehlukile ye-USB - |
| 3 | D+ | Umehluko | Idatha ehlukile ye-USB + |
| 4 | ID | I-Analog | Khetha umsebenzi wokuba ngusokhaya/wedivayisi |
| 5 | GND | Amandla | Phansi Kwamandla |
Izihloko
Ibhodi liveza izixhumi ezimbili ezingamaphini angu-15 ezingahlanganiswa ngezihloko zamaphini noma zithengiswe ngama-vias ane-castelated.
| Phina | Umsebenzi | Uhlobo | Incazelo |
| 1 | D13 | Idijithali | I-GPIO |
| 2 | +3V3 | Amandla Ngaphandle | Amandla akhiqizwa ngaphakathi kumadivayisi angaphandle |
| 3 | I-AREF | I-Analog | Ireferensi ye-Analog; ingasetshenziswa njenge-GPIO |
| 4 | A0/DAC0 | I-Analog | I-ADC in/DAC iphumile; ingasetshenziswa njenge-GPIO |
| 5 | A1 | I-Analog | I-ADC phakathi; ingasetshenziswa njenge-GPIO |
| 6 | A2 | I-Analog | I-ADC phakathi; ingasetshenziswa njenge-GPIO |
| 7 | A3 | I-Analog | I-ADC phakathi; ingasetshenziswa njenge-GPIO |
| 8 | I-A4/SDA | I-Analog | I-ADC phakathi; I-I2C SDA; Ingasetshenziswa njenge-GPIO (1) |
| 9 | I-A5/SCL | I-Analog | I-ADC phakathi; I-I2C SCL; Ingasetshenziswa njenge-GPIO (1) |
| 10 | A6 | I-Analog | I-ADC phakathi; ingasetshenziswa njenge-GPIO |
| 11 | A7 | I-Analog | I-ADC phakathi; ingasetshenziswa njenge-GPIO |
| 12 | I-VUSB | Amandla Angaphakathi/Aphume | Ngokujwayelekile i-NC; ingaxhunywa kuphinikhodi ye-VUSB yesixhumi se-USB ngokufinyeza i-jumper |
| 13 | I-RST | I-Digital In | Okokufaka okusebenzayo okuphansi kokusetha kabusha (impinda yephinikhodi 18) |
| 14 | GND | Amandla | Phansi Kwamandla |
| 15 | I-VIN | I-Power In | Okokufaka kwe-Vin Power |
| 16 | TX | Idijithali | UART TX; ingasetshenziswa njenge-GPIO |
| 17 | RX | Idijithali | UART RX; ingasetshenziswa njenge-GPIO |
| 18 | I-RST | Idijithali | Okokufaka okusebenzayo okuphansi kokusetha kabusha (impinda yephinikhodi 13) |
| 19 | GND | Amandla | Phansi Kwamandla |
| 20 | D2 | Idijithali | I-GPIO |
| 21 | I-D3/PWM | Idijithali | I-GPIO; ingasetshenziswa njenge-PWM |
| 22 | D4 | Idijithali | I-GPIO |
| 23 | I-D5/PWM | Idijithali | I-GPIO; ingasetshenziswa njenge-PWM |
| 24 | I-D6/PWM | Idijithali | I-GPIO ingasetshenziswa njenge-PWM |
| 25 | D7 | Idijithali | I-GPIO |
| 26 | D8 | Idijithali | I-GPIO |
| 27 | I-D9/PWM | Idijithali | I-GPIO; ingasetshenziswa njenge-PWM |
| 28 | I-D10/PWM | Idijithali | I-GPIO; ingasetshenziswa njenge-PWM |
| 29 | D11/MOSI | Idijithali | SPI MOSI; ingasetshenziswa njenge-GPIO |
| 30 | D12/MISO | Idijithali | SPI MISO; ingasetshenziswa njenge-GPIO |
Susa iphutha
Ohlangothini olungezansi lwebhodi, ngaphansi kwemojula yokuxhumana, amasignali okususa iphutha ahlelwa njengamaphedi okuhlola angu-3 × 2 anephimbo elingu-100 mil elikhishwe iphinikhodi 4. Iphinikhodi 1 iboniswe kuMfanekiso 3 - Izikhundla zokuxhuma.
| Phina | Umsebenzi | Uhlobo | Incazelo |
| 1 | +3V3 | Amandla Ngaphandle | Amandla akhiqizwa ngaphakathi azosetshenziswa njenge-voltage reference |
| 2 | I-SWD | Idijithali | nRF52480 Idatha Yokulungisa Iphutha Kwentambo Eyodwa |
| 3 | SWCLK | I-Digital In | nRF52480 Single Wire Debug Clock |
| 5 | GND | Amandla | Phansi Kwamandla |
| 6 | I-RST | I-Digital In | Okokufaka okusebenzayo kokusetha kabusha okuphansi |
Ulwazi Lwemishini
Uhlaka Lwebhodi kanye Nezimbobo Okufakwayo
Izinyathelo zebhodi zixubene phakathi kwe-metric ne-imperial. Izinyathelo zasebukhosini zisetshenziselwa ukunakekela igridi yephimbo engu-100 mil phakathi kwemigqa yokuphina ukuyivumela ukuthi ilingane nebhodi lezinkwa kuyilapho ubude bebhodi buyi-Metric.
Izitifiketi
I-Declaration of Conformity CE DoC (EU)
Simemezela ngaphansi kwesibopho sethu sodwa ukuthi imikhiqizo engenhla ithobelana nezidingo ezibalulekile ze-EU Directives futhi ngenxa yalokho ifanelekela ukuhamba mahhala ezimakethe ezihlanganisa i-European Union (EU) kanye ne-European Economic Area (EEA).
Isimemezelo Sokuvumelana ne-EU RoHS & REACH 211 01/19/2021
Amabhodi e-Arduino ahambisana ne-RoHS 2 Directive 2011/65/EU ye-European Parliament kanye ne-RoHS 3 Directive 2015/863/EU yoMkhandlu wangomhla zizi-4 kuJuni 2015 mayelana nokukhawulelwa kokusetshenziswa kwezinto ezithile eziyingozi ezintweni zikagesi neze-elekthronikhi.
| Into | Umkhawulo omkhulu (ppm) |
| Ukuhola (Pb) | 1000 |
| I-Cadmium (Cd) | 100 |
| I-Mercury (Hg) | 1000 |
| I-Hexavalent Chromium (Cr6+) | 1000 |
| I-Poly Brominated Biphenyls (PBB) | 1000 |
| I-Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| I-Bis(2-Ethylhexyl} phthalate (DEHP) | 1000 |
| I-Benzyl butyl phthalate (BBP) | 1000 |
| I-Dibutyl phthalate (DBP) | 1000 |
| IDiisobutyl phthalate (DIBP) | 1000 |
Ukukhululwa: Akukho ukukhululwa okufunayo.
Amabhodi e-Arduino athobelana ngokugcwele nezimfuneko ezihlobene ze-European Union Regulation (EC) 1907/2006 eziphathelene noBhaliso, Ukuhlola, Ukugunyazwa Nokukhawulwa Kwamakhemikhali (REACH). Simemezela ukuthi awekho ama-SVHC (https://echa.europa.eu/web/guest/candidate-list-table), Uhlu Lwamakhandidethi Lwezinto Ezikhathazayo Eziphakeme Kakhulu ngokugunyazwa okwamanje olukhishwe yi-ECHA, lukhona kuyo yonke imikhiqizo (kanye nephakeji) ngamanani anengqikithi yokuhlushwa elingana noma engaphezu kuka-0.1%. Ngokwazi kwethu konke, siphinde simemezele ukuthi imikhiqizo yethu ayinazo noma yiziphi izinto ezisohlwini “Lokugunyazwa” (Isijobelelo XIV semithethonqubo ye-REACH) kanye Nezinto Ezikhathazayo Eziphakeme Kakhulu (SVHC) kunoma yimaphi amanani abalulekile njengoba kushiwo. yi-Annex XVII yohlu lwabazokhethwa olushicilelwe yi-ECHA (European Chemical Agency) 1907 /2006/EC.
Isimemezelo Sezimbiwa Ezingqubuzanayo
Njengomphakeli womhlaba wonke wezingxenye zikagesi nezikagesi, i-Arduino iyazazi izibopho zethu mayelana nemithetho neziqondiso eziphathelene ne-Conflict Minerals, ikakhulukazi i-Dodd-Frank Wall Street Reform and Consumer Protection Act, Isigaba 1502. I-Arduino ayitholi ngokuqondile noma ayicubunguli amaminerali angqubuzanayo njengawo. njengeTin, Tantalum, Tungsten, noma Igolide. Amaminerali okungqubuzana aqukethwe emikhiqizweni yethu ngendlela ye-solder noma njengengxenye yama-alloys ensimbi. Njengengxenye yokukhuthala kwethu okunengqondo, i-Arduino ixhumane nabaphakeli abangaphakathi kochungechunge lwethu lokuhlinzeka ukuze kuqinisekiswe ukuqhubeka kwabo nokuthobela imithetho. Ngokusekelwe olwazini esilutholile kuze kube manje simemezela ukuthi imikhiqizo yethu iqukethe Amaminerali Angqubuzanayo athathwe ezindaweni ezingenazo izingxabano.
ISITATIMENDE SE-FCC
Noma yiziphi Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza.
Le divayisi ithobela ingxenye 15 yeMithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:
- Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi
- lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.
Isitatimende Sokuchayeka Kwe-FCC RF
- Lesi Transmitter akufanele sibekwe endaweni eyodwa noma sisebenze ngokuhlangana nanoma iyiphi enye i-antenna noma isidluliseli.
- Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka emisebeni ye-RF ebekwe endaweni engalawuleki.
- Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingama-20cm phakathi kwe-radiator nomzimba wakho.
Amamanuwali omsebenzisi wezinsiza zomsakazo ezikhishwe ilayisense azoqukatha isaziso esilandelayo noma esifanayo endaweni esobala kumanuwali yomsebenzisi, kungenjalo kudivayisi noma kokubili. Le divayisi ithobelana nezinga le-RSS elikhishwe yi-Industrial Canada. Ukusebenza kungaphansi kwemibandela emibili elandelayo:
- le divayisi ingase ingabangeli ukuphazamiseka
- lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafunwa kocingo.
Isexwayiso se-IC SAR
Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingama-20 cm phakathi kwe-radiator nomzimba wakho.
Okubalulekile: Izinga lokushisa lokusebenza le-EUT alikwazi ukweqa u-85℃ futhi akufanele libe ngaphansi kuka -40℃.
Ngalokhu, i-Arduino Srl imemezela ukuthi lo mkhiqizo uthobelana nezidingo ezibalulekile kanye nezinye izinhlinzeko ezifanele ze-Directive 2014/53/EU. Lo mkhiqizo uvunyelwe ukusetshenziswa kuwo wonke amazwe angamalungu e-EU.
| Amabhendi wemvamisa | Amandla amakhulu okukhipha (ERP) |
| 863-870Mhz | I-TBD |
Ulwazi Lwenkampani
| Igama Lenkampani | I-Arduino Srl |
| Ikheli Lenkampani | Via Andrea Appiani 25 20900 MONZA Italy |
Imibhalo Eyisethenjwa
| Ireferensi | Isixhumanisi |
| I-Arduino IDE (Ideskithophu) | https://www.arduino.cc/en/software |
| I-Arduino IDE (Ifu) | https://create.arduino.cc/editor |
| Cloud IDE Ukuqalisa | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino-web- editor-4b3e4a |
| Inkundla | http://forum.arduino.cc/ |
| Nina B306 | https://content.u-blox.com/sites/default/files/NINA-B3_DataSheet_UBX-17052099.pdf |
| I-ProjectHub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Ireferensi Yelabhulali | https://www.arduino.cc/reference/en/ |
Umlando Wokubuyekeza
| Usuku | Buyekeza | Izinguquko |
Amadokhumenti / Izinsiza
 |
I-Arduino ABX00071 Nano 33 BLE Module [pdf] Umhlahlandlela Womsebenzisi I-ABX00071 Nano 33 BLE Module, ABX00071, Nano 33 BLE Module, BLE Module, Module |