I-AOKIN Raspberry Pi A 3.5 Intshi Display Module
Imininingwane
- Ukunikezwa kwamandla: 5V 2.5A kuyanconywa
- Ukuhambisana: I-Raspberry Pi
- Ukulungiswa: Kuncike kusithombe se-OS
- Kudingeka Ukufakwa Komshayeli: Yebo
Izici
- 320×480 resolution, LCD Interface: SPI(Fmax:32MHz)
- Resistive touch control, comes with touch pen
- Supports any revision of Raspberry Pi (directly-pluggable)
- Compatible with Raspberry Pi A, B, A+, B+, 2B, 3B, 3B+,4B, 5 versions
- Drivers provided (works with your own Raspbian/Ubuntu directly)
- GPIO physical interface, Size perfectly fits the Raspberry Pi
- Supports Raspbian system, ubuntu system ,kali Linux system
Install OS image with pre-loaded LCD Driver
Warm Tips: If you have difficulty installing the driver, or if you stil can’t use the display property after installing the driver, Please Try our Configned images for tested.
Just need to download(the following link) and write the image into the TF card. DO NOT reed any driver installation steps,
https://mega.nz/folder/ixQiTa7R#EM2uFGwMC8QSU6D4untoGA
https://mega.nz/folder/mhw2DCqK#qFiavXCAXOXMqOGjl-Xrtaw
https://mega.nz/folder/mhw2DCqK#qFiavXCAXOXMqOGjl-Xrtaw
- Download and unzip the CS Image you intend to use
- Download and install Raspberry Pi image burn software
- Use Raspberry Pi imager software to flash the OS Image with preloader LCD Driver to the SD card
Izinyathelo:
Amathiphu Afudumele：If you have difficulty installing the driver, or if you still can’t use the display properly after installing the driver, Please Try our Configned images for tested. Just need download and write the image into the TF card. DO NOT need any driver installation steps.
- Download and unzip the OS Image you intend to use
- Download and install Raspberry Pi image burn software
- Use Raspberry Pi imager software to flash the OS lmage with pre-loadder LCD Driver to the SD card
If you still keep getting the white screen issue, try the Raspbian Bullseye version at last.
Compatible with (directly-pluggable)
Amathiphu
- Uma usebenzisa ne-Raspberry Pi, kufanele uqale ufake umshayeli bese ubhala ikhodi, ngaphandle kwalokho isikrini sizobonisa okumhlophe kuphela.
- Kunconywa ukusebenzisa amandla angaphezu kuka-5V 2.5A, ngaphandle kwalokho kungase kuhluleke ukuqala futhi isikrini sizobonisa kuphela okumhlophe.
Interfaces & Description
3.5 inch Raspberry Pi Touch Screen
imibuzo ejwayelekile ukubuzwa
What should I do if I encounter a white screen issue?
If you are facing a white screen problem, try using the Raspbian Bullseye version as a last resort.
Amadokhumenti / Izinsiza
 |
I-AOKIN Raspberry Pi A 3.5 Intshi Display Module [pdf] Incwadi Yomnikazi I-Raspberry Pi A 3.5 Intshi Display Module, 3.5 Intshi Display Module, Display Module, Module |