Ukufinyelela & Ukuhlanganiswa kwamandla

Isixazululo se-TROVE Access and Power Integration

I-Trove1DM1
- I-Trove1 ebiyelwe ngendiza yasemuva ye-Altronix/DMP (TDM1)
TDM1
- Indiza yasemuva ye-Altronix/DMP kuphela
I-Trove2DM2
- I-Trove2 ebiyelwe ngendiza yasemuva ye-Altronix/DMP (TDM2)
TDM2
- Indiza yasemuva ye-Altronix/DMP kuphela
I-TDMD2
- I-backplane yomnyango we-DMP ye-Trove2 ne-Trove3
Umhlahlandlela wokufaka
Zonke izimpawu zokuthengisa ezibhalisiwe ziyimpahla yabanikazi bazo.
I-Rev. TDMP103017
Ifaka Inkampani: _______
Igama lommeleli wenkonzo: ________
Ikheli: ____________________
Inombolo yefoni: _______________

Kuphelileview:

I-Trove1DM1 ne-Trove2DM2 zisebenzisa ama-DMP 734/734N Wiegand Amamojula anamandla noma ngaphandle kwawo kwe-Altronix kanye nezinsiza zamasistimu okulawula ukufinyelela.
Uhlu lwabasebenzeli:

• UL 294 – uhlelo lwesi-6: Ukuphepha Komugqa I, Ukuhlasela Okulimazayo I, Ukukhuthazela IV, Amandla Okuma Ngokuqinile II*. *I-Stand-by Power Level I uma lingekho ibhethri elinikeziwe.
• Le mishini yedijithali Yekilasi B ithobelana ne-Canadian ICES-003. Izingubo zokugqoka ze-Cet zesigaba B zihambisana ne-NMB-003 yase-Canada.
• I-CE European Conformity.

Imininingwane:

• 16 Gauge indiza engemuva kanye nendawo ebiyelwe nge ample knockouts ukuze ufinyelele kalula.

I-Trove1DM1
I-Trove1 ebiyelwe ngendiza yangemuva ye-TDM1 Altronix/DMP

• Kufaka: tamper switch, cam lock, lock nuts, and mounting hardware. Ubukhulu Bendawo (H x W x D): 18” x 14.5” x 4.625” (457mm x 368mm x 118mm).

TDM1
Indiza yasemuva ye-Altronix/DMP kuphela

• Kufaka i-hardware ekhulayo.
  Ubukhulu (H x W x D): 16.625” x 12.5” x 0.3125” (422.3mm x 317.5mm x 7.9mm).

I-TDM1 ihlanganisa inhlanganisela yalokhu okulandelayo:
Amamojula we-Altronix:

• Okukodwa (1) AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, eFlow4NB, eFlow6NB, eFlow102NB noma eFlow104NB.
• Okukodwa (1) ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6.

Amamojula e-DMP:

• Kufika kumamojula ayisishiyagalombili (8) e-DMP 734/734N.

I-Trove2DM2
I-Trove2 ebiyelwe ngendiza yangemuva ye-TDM2 Altronix/DMP

• Kufaka: tamper switch, cam lock, lock nuts, and mounting hardware. Ubukhulu Bendawo (H x W x D): 27.25” x 21.75” x 6.5” (692.2mm x 552.5mm x 165.1mm).

TDM2
Indiza yasemuva ye-Altronix/DMP kuphela 

• Kufaka i-hardware ekhulayo.
  Ubukhulu (H x W x D): 25.375” x 19.375” x 0.325” (644.5mm x 482.6mm x 8.3mm)

I-TDM2 ihlanganisa inhlanganisela yalokhu okulandelayo:
Amamojula we-Altronix:

• Okubili (2) AL400ULXB2, AL600ULXB, AL1012ULXB, AL1024ULXB2, eFlow4NB, eFlow6NB, eFlow102NB noma eFlow104NB.
• Amabili (2) ACM8(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6. Amamojula e-DMP:
•  Kufika kumamojula ayishumi nesithupha (16) DMP 734/734N.

I-TDMD2
Indiza engemuva yomnyango we-DMP kuphela

• Kufaka i-hardware ekhulayo.
  Ubukhulu (H x W x D): 23.75” x 18.125” x 0.3125” (603.3mm x 460.3mm x 7.9mm).

I-TDMD2 ihlanganisa inhlanganisela yamabhodi e-DMP alandelayo:

• Ibhodi elilodwa (1) le-XR150 noma i-XR550 kanye namabhodi okunweba afinyelela kwamathathu (3) e-multi-zone 714 kuze kufike ezindaweni ezingamashumi amane nesishiyagalombili (48).

Imiyalo yokufaka ye-Trove1 ne-Trove2:

1. Susa indiza engemuva endaweni ebiyelwe ngaphambi kokuyikhweza (ungalahli ihadiwe).
2. I-Trove1DM1 (Ikhasi 7):
   Maka futhi ubhoboze izimbobo odongeni ukuze uhambisane nezimbobo zokhiye ezimbili eziphezulu endaweni ebiyelwe. Faka izinsimbi ezimbili eziphezulu nezikulufi odongeni ezinamakhanda ezikulufa aphumele ngaphandle. Beka izimbobo zokhiye ezingaphezulu kwesivalo phezu kwezikulufu ezimbili ezingenhla; ezingeni futhi evikelekile. Maka indawo yezimbobo ezimbili ezingezansi. Susa indawo ebiyelwe. Geza izimbobo ezingezansi bese ufaka izibophelelo ezimbili. Beka izimbobo zokhiye ezingaphezulu kwesivalo phezu kwezikulufu ezimbili ezingaphezulu. Faka izikulufu ezimbili ezingezansi bese uqinisekisa ukuthi uqinisa zonke izikulufu.
   I-Trove2DM2 (Ikhasi 8):
   Maka futhi ubhoboze izimbobo odongeni ukuze uhambisane nezimbobo zokhiye ezintathu eziphezulu endaweni ebiyelwe. Faka izinsimbi ezintathu eziphezulu nezikulufi odongeni ezinamakhanda esikulufa azungezayo. Beka izimbobo zokhiye ezingaphezulu kwesivalo sezikulufu ezintathu; ezingeni futhi evikelekile. Maka indawo yezimbobo ezintathu ezingezansi. Susa indawo ebiyelwe. Geza izimbobo ezingezansi bese ufaka izibophelelo ezintathu. Beka izimbobo zokhiye ezingenhla zesivikelo phezu kwezikulufu ezintathu ezingaphezulu. Faka izikulufu ezintathu ezingezansi futhi uqiniseke ukuthi uqinisa zonke izikulufu.
3. I-Mount ifakwe ku-UL Listed tamper switch (i-Altronix Model TS112 noma okulinganayo) endaweni oyifunayo, ihinge ephambene. Shelelezisa i-tamper shintsha ubakaki onqenqemeni lwendawo ebiyelwe cishe u-2” ukusuka kwesokudla (Fig. 1, pg. 1). Xhuma tampshintsha izintambo kokokufaka kwe-Access Control Panel noma idivayisi efanele yokubika esohlwini lwe-UL. Ukucupha isignali ye-alamu vula umnyango wendawo ebiyelwe.
4. Mount Altronix/DMP modules to TDM1 noma TDM2 backplane, bheka amakhasi 3, 4.

I-TDM1: Ukucushwa Kwe-Altronix Power Supply kanye/noma I-Sub-Assembly Boards kanye namamojula e-DMP 734/734N Wiegand

1. Bopha izikhala (ezinikeziwe) kumaphemu afana nephethini yembobo ye-Altronix Power Supply/Charger noma i-Altronix
   Amabhodi e-Sub-Assembly (Fig. 2, pg. 3). Bopha ama-spacers ensimbi ezindaweni ezifanele ukuze unikeze isisekelo esifanele, bheka ngezansi (Fig. 2, pg. 3).
2. Faka amabhodi kuma-spacers usebenzisa izikulufi zekhanda le-pan engu-5/16 (okuhlinzekiwe) (Umfanekiso 2, 2a, pg. 3).
3. Faka amamojula e-DMP 734/734N ezindaweni ezifanele (Umfanekiso 2, ikhasi 3):
   a. qinisa ama-spacers kuma-pems afanele ku-backplane (Fig. 2, 2b, pg. 3).
   b. susa ibhodi le-DMP 734/734N endlini yepulasitiki. Sebenzisa ingxenye eyisisekelo yendlu ukuze ugibele ku-TDM1 (Fig. 2b, pg. 3).
   c. vikela isisekelo se-DMP 734/734N kuma-spacers usebenzisa izikulufu zekhanda lepani elinikeziwe elingu-5/16”.
   d. yenza konke ukuxhumana okudingekayo ngaphambi kokuhlanganisa kabusha i-DMP 734/734N Wiegland.
4. Bophela indiza yangemuva ye-TDM1 ku-Trove1 ebiyelwe usebenzisa izikulufu zekhanda lepani (inqobo nje uma).

Umfanekiso 2 - Trove1DM1/TDM1 Configurations

I-TDM2: Ukucushwa Kwe-Altronix Power Supply kanye/noma I-Sub-Assembly Boards kanye namamojula e-DMP 734/734N Wiegand

1. Bopha izikhala (ezinikeziwe) kuma-pem afana nephethini yembobo ye-Altronix Power Supply/Charger noma amabhodi e-Altronix Sub-Assembly (Fig. 3, pg. 4). Bopha ama-spacers ensimbi ezindaweni ezifanele ukuze unikeze isisekelo esifanele, bheka ngezansi (Fig. 3, pg. 4).
   Qaphela: indawo ngayinye ye-Altronix ye-sub-assembly eyodwa ingahlalisa eyodwa (1) ACM8/ACM8CB, PD4UL/PD4ULCB, PD8UL/PD8ULCB, MOM5, PDS8(CB) noma i-VR6.
2. Faka amabhodi kuma-spacers usebenzisa izikulufi zekhanda le-pan engu-5/16 (okuhlinzekiwe) (Umfanekiso 3, 3a, pg. 4).
3. Faka amamojula e-DMP 734/734N ezindaweni ezifanele (Umfanekiso 3, ikhasi 4):
   a. qinisa ama-spacers kuma-pems afanele ku-backplane (Fig. 3, 3b, pg. 4).
   b. susa ibhodi le-DMP 734/734N endlini yepulasitiki. Sebenzisa ingxenye eyisisekelo yendlu ukuze ugibele ku-TDM2 (Fig. 3b, pg. 4).
   c. vikela isisekelo se-DMP 734/734N kuma-spacers usebenzisa izikulufu zekhanda lepani elinikeziwe elingu-5/16”.
   d. yenza konke ukuxhumana okudingekayo ngaphambi kokuhlanganisa kabusha i-DMP 734/734N Wiegland.
4. Bophela indiza yangemuva ye-TDM2 ku-Trove2 ebiyelwe usebenzisa izikulufu zekhanda lepani (inqobo nje uma).

Umfanekiso 3 - Trove2DM2/TDM2 Configurations

Trove1DM1 / TDM1 / Trove2DM2 / TDM2 / TDMD2 Umhlahlandlela wokufaka

I-TDMD2: Ukumiswa Kwamabhodi e-DMP:

1. Ukukhweza amabhodi okunweba angu-714:
   a. Bopha ama-spacers (okuhlinzekiwe) ekucushweni kwe-pem ehambisanayo yendiza engemuva (Fig. 4, pg. 5).
   b. Faka amabhodi kuma-spacers usebenzisa izikulufi zekhanda le-pan engu-5/16 (okuhlinzekiwe) (Fig. 4a, pg. 5).
2. Ukukhweza ibhodi le-XR150 noma i-XR550 kusetshenziswa ubakaki (kuhlinzekiwe):
   a. Phusha izikulufu ezimbili (2) zekhanda le-pan (ezinikeziwe) ngokusebenzisa izimbobo ezihambisanayo kusukela ngemuva kwe-backplane (Fig. 4b, pg. 5, Isinyathelo 1).
   b. Faka ibakaki elinezimbobo kwesokunxele kuzikulufu bese uvikeleke ngamantongomane wokukhiya amabili (2) (okunikeziwe) (Umfanekiso 4b, ikhasi 5, Isinyathelo 2).
   c. Bophela ama-spacer amabili (2) (okunikeziwe) kuma-pem akhwezayo.
   d. I-Orient DMP XR150 noma i-XR550 ukuze i-terminal block ingakwesobunxele. Shelelezisa unqenqema oluphambene lwebhodi emifantwini yabakaki
   (Fig. 1b, pg. 2, Step 3) futhi uvikele ibhodi kuma-spacers ngezikulufu ezimbili (2) zekhanda le-pan (ezinikeziwe).
3. Khipha indiza engemuva kumnyango wendawo ebiyelwe ngehadiwe.

Umfanekiso 4 - TDMD2 Ukucushwa

Ubukhulu be-TDM1 (H x W x D):
16.625” x 12.5” x 0.3125” (422.3mm x 317.5mm x 7.9mm)

Ubukhulu be-TDM2 (H x W x D):
25.375” x 19.375” x 0.325” (644.5mm x 482.6mm x 8.3mm)

Ubukhulu be-TDMD2 (H x W x D):
23.75” x 18.125” x 0.3125” (603.3mm x 460.3mm x 7.9mm)

I-Trove1DM1 Enclosure Dimensions (H x W x D):
18” x 14.5” x 4.625” (457mm x 368mm x 118mm)

I-Trove2DM2 Enclosure Dimensions (H x W x D):
27.25” x 21.75” x 6.5” (692.2mm x 552.5mm x 165.1mm)

I-Altronix ayinasibopho sanoma yimaphi amaphutha e-typographical.
140 58th Street, Brooklyn, New York 11220 USA
ifoni: 718-567-8181
ifeksi: 718-567-9056
web indawo: www.altronix.com 
i-imeyili: info@altronix.com 
Iwaranti yempilo yonke
IITrove1DM1 / TDM1 / Trove2DM2 / TDM2 / TDMD2

Amadokhumenti / Izinsiza

I-Altronix TROVE Access and Power Integration Solution [pdf] Umhlahlandlela wokufaka Trove1DM1, TDM1, Trove2DM2, TDM2, TDMD2, TROVE Access and Power Integration Solution, TROVE, Access and Power Integration Solution, Power Integration Solution, Access Integration Solution, Integration Solution

Izithenjwa

• Imaniwali yosebenzisayo