I-Altronix Tango8A Series Finyelela Izilawuli Zamandla Nge-PoE-Driven Power Supply

Kuphelileview

I-Altronix Tango8A(CB) I-PoE Driven Power Supply With Access Power Controller iguqula okokufaka kwe-IEEE802.3bt PoE kube yisishiyagalombili (8) elawulwayo engu-24VDC kanye/noma ukuphuma kwe-12VDC kufika ku-65W. Iqeda isidingo sevolumu ephezulutage ngaphakathi kwendawo ebiyelwe. I-Tango8A(CB) yakhelwe ukusekela ibhethri elilodwa le-12VDC LiFePO4 (Lithium Iron Phosphate) le-12VDC kanye ne-24VDC eyisipele.

Imininingwane

Okokufaka

I-Tango1B:

• 802.3bt PoE kufika ku-90W noma 802.3at kufika ku-30W noma 802.3af kufika ku-15W. I-ACMS8/ACMS8CB:
• Okokufaka kwe-trigger eyisishiyagalombili (8):
  a) Okokufaka okuvamise ukuvuleka (NO) (oxhumana nabo abomile).
  b) Okokufaka okuvalekile (NC) (oxhumana nabo abomile).
  c) Vula okokufaka kukasinki wokuqoqa.
  d) Okokufaka Okumanzi (5VDC – 24VDC) okunokumelana no-10K
  e) Noma iyiphi inhlanganisela yalokhu okungenhla.

Imiphumela

I-Tango1B:

• 12VDC kufika ku-5.4A (65W) kanye/noma 24VDC kufika ku-2.7A (65W). Okukhiphayo okuhlanganisiwe akungeqi ku-65W.
• Uma ushaja amabhethri:
  12VDC kufika ku-4.6A (55W) kanye/noma 24VDC kufika ku-2.3A (55W). Okukhiphayo okuhlanganisiwe akungeqi ku-55W.

I-ACMS8

• Imiphumela evikelwe nge-Fuse ilinganiselwe ngo-@2.5A ngokukhiphayo ngakunye, okungewona amandla-alinganiselwe. Okukhiphayo okuphelele okungu-20A max. Ungeqi izilinganiso zokunikezwa kwamandla okukodwa. Bheka Okokufaka/Okukhiphayo Voltage Izilinganiso, p. 6.

I-ACMS8CB

• Imiphumela evikelwe nge-PTC ikalwe ngo-@2A ngokukhiphayo ngakunye, Ikilasi 2 lilinganiselwe amandla. Isamba esiphumayo 16A ubuningi.
  Ungeqi izilinganiso zokunikezwa kwamandla okukodwa. Bheka Okokufaka/Okukhiphayo Voltage Izilinganiso, p. 6.
  Isamba sokukhishwa kwamanje akufanele seqe umkhawulo. isilinganiso samanje samandla kagesi asetshenziswa kokokufaka ngakunye. Bona Ukukhipha Okuphezulu Kwezinto Zamandla ze-Altronix.
• Okuphumayo okuyisishiyagalombili (8) okukhethekayo okulawulwa ngokuzimele noma okuphumayo okuyisishiyagalombili (8) kwefomu “C” elilawulwa ngokuzimele (bona ngezansi ukuze uthole izilinganiso):
  a) I-Fail-Safe kanye/noma Yehlulekile-Vikela amandla okukhipha amandla.
  b) Ukudluliselwa kwefomu “C” kukalwe ku-2.5A. 5, 12, 24VDC, 0.6 Power Factor.
  c) Okuphumayo kwamandla asizayo (akushintshiwe).
  d) Noma iyiphi inhlanganisela yalokhu okungenhla.
  Okukhiphayo ngakunye kungase kusethelwe ku-OFF indawo ukuze kuseviswe (i-jumper ephumayo isethwe endaweni emaphakathi).
  Ayisebenzi ezinhlelweni Zokuthintana Nezomile.
• Noma iyiphi kweziyisishiyagalombili (8) fuse/PTC-avikelwe amandla avikelwe kuyakhetheka ukulandela amandla Okokufaka 1 noma Okokufaka 2. Ivolumu yokuphumayotagu-e womkhiqizo ngamunye uyafana nevolumu yokufakatage okokufaka okukhethiwe.
  Bheka Okokufaka/Okukhiphayo Voltage Izilinganiso, p. 6.
• Ukucindezeleka kokucindezeleka.

Izilinganiso ze-Fuse/PTC:

• I-ACMS8(CB)
• Amafuse okokufaka amakhulu alinganiselwe ngo-15A/32V ngalinye.
• Amafuse okukhiphayo alinganiselwe ngo-3A/32V (ACMS8).
• Ama-PTC okukhiphayo akalwe ngo-2A (ACMS8CB).
• I-TANGO1B: i-fuse yebhethri ilinganiselwe @ 10A/32V ngayinye.
  I-Ethernet Output (Tango1B):
• Dlula nge-Ethernet Port (idatha kuphela).
• 100/1G.

Ibhethri (Tango1B)

• Ishaja yebhethri engu-12VDC yebhethri ye-Lithium Iron Phosphate (LiFeP04 kuphela).
• Ubuchwepheshe obuhlukile buvumela ibhethri elilodwa ukwenza ikhophi yasenqolobaneni ye-12VDC kanye/noma amasistimu angu-24VDC.
• Ukuvala amandla aphansi. Ivala amatheminali okukhiphayo e-DC uma ibhethri linomthamotagi-e yehla ngaphansi kwama-80% wenani elijwayelekile. Ivimbela ukuphuma kwebhethri okujulile.

Ukugada (Tango1B)

• Ukulahlekelwa Okokufaka kwe-PoE.
• Ukugadwa kwebhethri.
• I-alamu yomlilo Nqamula
• Ukunqanyulwa kwe-alamu yomlilo (i-latching noma ukungaxhunywanga) kuyakhetheka ngakunye kunoma iyiphi noma yonke imiphumela eyisishiyagalombili (8). Izinketho zokufaka ze-Fire Alarm:
  a) Ivamise ukuvula okuthi [NO] noma kuvalwe ngokuvamisile [NC] okokufaka koxhumana naye okomile.
  Okokufaka kokuhlehla kwe-polarity kusuka kusekethi yokusayina ye-FACP.
• Okokufaka kwe-FACP i-WET ilinganiselwe ku-5-30VDC 7mA.
• I-FACP yokufaka i-EOL idinga ukuphela komugqa ongu-10K.
• I-FACP output relay [NC]: I-Dry 1A/28VDC, 0.6 Power Factor noma 10K ukumelana ne-[EOL JMP] engaguquki.

Izinkomba Ezibonakalayo:

• I-Tango1B
• Okokufaka kubonisa ivolumu yokufakatagekhona.
• Isimo sebhethri sibonisa isimo senkinga yebhethri.
• PoE Class inkomba.
• I-Supervision PoE Fail noma i-BAT Fail.
• I-ACMS8(CB)
• Ama-LED abomvu akhombisa ukuthi ukuphuma kubaliwe.
• I-LED eluhlaza okwesibhakabhaka ikhombisa ukuthi ukunqanyulwa kwe-FACP kubaliwe.
• Ivolumu yomuntu ngamunyetage LED ikhombisa 12VDC (Green) noma 24VDC (Red).

Ezemvelo

• Izinga lokushisa lokusebenza: 0ºC ukuya ku-49ºC ku-ambient.
• Umswakamo: 20 kuya ku-85%, awujiki.

Ubukhulu Bokuvalekile (cishe H x W x D)

• 15.5" x 12.25" x 4.5" (394mm x 311mm x 114mm).

Izesekeli

• Izinsiza Zokuthola Amandla
• I-NetWay1BT – Imbobo Eyodwa Ephethwe I-Hi-PoE Injector inikeza amandla angu-90W esewonke. I-NetWaySP1BT – 802.3bt Media Converter/Injector inikeza amandla angu-90W esewonke. I-NetWay4BT – I-4-Port Ephethwe I-Hi-PoE Midspan Injector inikeza amandla angu-480W esewonke. I-NetWay8BT – I-8-Port Ephethwe I-Hi-PoE Midspan Injector inikeza amandla angu-480W esewonke.

I-Stand-by Specifications

Ibhethri	Ukulawula Ukufinyelela Izinhlelo zokusebenza ezilindile
4AH	30 Amaminithi.
7AH	45 Amaminithi.
12AH	Amahora angu-1.5

Imiyalelo yokufaka

Izindlela zokufaka izintambo zizohambisana Nekhodi Kagesi Kazwelonke/NFPA 70/NFPA 72/ANSI, Ikhodi Yogesi yaseCanada, kanye nawo wonke amakhodi endawo neziphathimandla ezinegunya. Umkhiqizo uhloselwe ukusetshenziswa endlini kuphela.

1. Faka iyunithi endaweni oyifunayo. Maka futhi ubhoboze izimbobo odongeni ukuze uhambisane nezimbobo zokhiye ezimbili eziphezulu
   indawo ebiyelwe. Faka izinsimbi ezimbili eziphezulu nezikulufi odongeni ezinamakhanda ezikulufa aphumele ngaphandle. Beka izimbobo zokhiye ezingaphezulu kwendawo ebiyelwe phezu kwezikulufu ezimbili ezingenhla, ileveli, futhi uvikelekile. Maka indawo yezimbobo ezimbili ezingezansi. Susa indawo ebiyelwe. Geza izimbobo ezingezansi bese ufaka izibophelelo ezimbili. Beka izimbobo zokhiye ezingaphezulu kwesivalo phezu kwezikulufu ezimbili ezingaphezulu. Faka izikulufu ezimbili ezingezansi bese uqinisekisa ukuthi uqinisa zonke izikulufu
2. (I-Enclosure Dimensions, pg. 8). Indawo ebiyelwe evikelekile emhlabathini.
   Qinisekisa ukuthi zonke iziqhumane eziphumayo [PWR1] – [PWR8] zibekwe endaweni ye-PWR1 OFF (maphakathi)
3. Xhuma i-IEEE802.3bt PSE ku-RJ45 Jack imakwe i-PoE+ Data Input ebhodini le-PWR2 Tango1B (Fig. 4, pg. 5). Uma i-Data pass-through idingeka, xhuma enye
   IEEE802.3bt PSE kuya ku-RJ45 Jack imakwe [Okuphumayo Kwedatha] (Umfanekiso 4, ikhasi 5). VALIWE
   ISEXWAYISO: Ungathinti izingxenye zensimbi eziveziwe.
   Azikho izingxenye ezisebenzisekayo ngaphakathi. Bheka ukufakwa nokusevisa kubasebenzi besevisi abaqeqeshiwe.
4. Setha okukhiphayo ngakunye [OUT1] – [OUT8] kumandla womzila ukusuka kokokufaka 1 noma 2 (Umfanekiso 1, pg. 3).
   Qaphela: Kala okukhiphayo voltage ngaphambi kokuxhuma amadivayisi. Lokhu kusiza ukugwema umonakalo ongase ube khona.
5. Vala amandla ngaphambi kokuxhuma amadivayisi.
6. Izinketho zokuphumayo: I-Tango8A(CB) izohlinzeka ngamandla ashintshayo afinyelela kwayisishiyagalombili (8) noma ayisishiyagalombili (8) okomile
   okukhiphayo kwefomu elithi “C”, nanoma iyiphi inhlanganisela yakho kokubili amandla ashintshiwe kanye nokuphumayo kwefomu elithi “C”, kanye nokuphumayo kwamandla asizayo okuyisishiyagalombili (8) okungashintshiwe.

Ukushintsha ukuphuma kwamandla:

• Xhuma okokufaka okuyinegethivu (–) kocingo olunikwa amandla kutheminali ephawulwe ngokuthi [COM].
• Ngomsebenzi Wokuhluleka Kokuphepha xhuma okokufaka okuphozithivu (+) kocingo olunikwa amandla kutheminali ephawulwe ngokuthi [NC].
• Ngomsebenzi Wokuhluleka Kokuvikela xhuma okokufaka okuphozithivu (+) kwedivayisi enikwa amandla kutheminali ephawulwe ngokuthi [NO].

Imiphumela yefomu “C”:
Uma imiphumela yefomu "C" ifunwa, i-jumper ehambisanayo (1-8) kufanele ibekwe endaweni ye-OFF (Umfanekiso 1, pg. 3). Kungenjalo, i-fuse ehambisanayo yokuphumayo (1-8) ingasuswa (i-Tango8A kuphela). Xhuma i-negative (–) yokunikezwa kwamandla ngqo kudivayisi yokukhiya.
Xhuma iphozithivu (+) yomthombo wamandla kutheminali ephawulwe ngokuthi [C].

• Ngomsebenzi Wokuhluleka Kokuphepha xhuma iphozithivu (+) yocingo olunikwa amandla kutheminali ephawulwe ngokuthi [NC].
• Ngomsebenzi Wokuhluleka Kokuvikela xhuma iphozithivu (+) yocingo olunikwa amandla kutheminali ephawulwe ngokuthi [CHA]. Oxhumana nabo abomile balinganiselwe ku-2.5A, 28VDC.

Okuphumayo kwamandla asizayo (akushintshiwe)

• Xhuma okokufaka okuphozithivu (+) kocingo olunikwa amandla kutheminali ephawulwe ngokuthi [C] kanye negethivu (–) yocingo enikwa amandla kutheminali ephawulwe ngokuthi [COM]. Okukhiphayo kungasetshenziswa ukunikeza amandla okufunda amakhadi, amakhiphedi njll.

1. Vula amandla amakhulu ngemva kokuthi wonke amadivayisi axhunyiwe.
2. Izinketho ze-Input Trigger:
   Qaphela: Uma ukunqanyulwa kwe-Alamu Yomlilo kungasetshenziswa, xhuma isixhasi esingu-10K ohm kumatheminali amakwe [GND ne-EOL], futhi uxhume i-jumper kumatheminali amakwe [GND, RST].
3. Okokufaka Okujwayelekile (CHA):
   Isilayidi sokulawula okokufaka okunengqondo shintsha i-DIP iye endaweni YOKUVALIWE kokuthi [Shintsha 1-8] Xhuma izintambo zakho kumatheminali amakwe [+ INP1 –] ku-[+ INP8 –]. Okokufaka Okuvalekile (NC):
4. Slayida ingqondo yokulawula okokufaka ishintshela endaweni ethi VULIWE ku-[Shintsha 1-8] (Umdwebo 2, kwesokudla). Xhuma izintambo zakho kumatheminali amakwe [+ INP1 –] ku-[+ INP8 –].
   Vula Okokufaka Kosinki Wokuqoqa:
   Xhuma okokufaka kukasinki weqoqo elivulekile kutheminali ephawulwe ngokuthi [+ INP1 –] ku-[+ INP8 –]. Kumanzi (Voltage)
5. Ukulungiselelwa kokokufaka:

Ukuqaphela ngokucophelela i-polarity, xhuma ivolumutagIzintambo ze-e input trigger kanye ne-resistor engu-10K enikeziwe kumatheminali amakwe [+ INP1 –] ku-[+ INP8 –]. Uma usebenzisa voltage ukucupha okokufaka – setha ukushintshwa okuhambisanayo kwe-INP Logic endaweni ethi “VALIWE” Uma ukhipha ivolumutage ukuze ucuphe okokufaka - setha ukushintshwa kwe-INP Logic ehambisanayo endaweni ethi "VULIWE".

1. Izinketho ze-Fire Alarm Interface

• Okokufaka okuvamise ukuvaleka okuthi [NC], okokufaka okuvamise ukuvula okuthi [NO], noma okokufaka kokuhlehla kwe-polarity okuvela
• Isekhethi yokusayina ye-FACP izocupha okuphumayo okukhethiwe. Ukuze unike amandla i-FACP Nqamula ukuze
• okukhiphayo vula iswishi ye-DIP ehambisanayo [SW1-SW8].
• Ukuze ukhubaze ukunqamula kwe-FACP kokuphumayo vula iswishi ye-DIP ehambisanayo
• [SW1-SW8] IVALIWE. Iswishi itholakala ngqo kwesokunxele Sezinqamuleli Zesixhumi Esibonakalayo Somlilo. Okokufaka Okujwayelekile:
• Xhuma i-FACP yakho ne-resistor engu-10K ngokuhambisana kumatheminali amakwe okuthi [GND] kanye nokuthi [EOL]. Okokufaka Okuvalekile:
• Xhuma i-FACP yakho ne-resistor engu-10K kuchungechunge kumatheminali amakwe okuthi [GND] kanye nokuthi [EOL]. I-FACP Signaling Circuit Input Trigger:

Xhuma iphozithivu (+) nenegethivu (–) kusukela okukhiphayo kwesekethe ye-FACP kumatheminali amakwe [+ FACP –]. Xhuma i-FACP EOL kumatheminali amakwe [+ RET –] (i-polarity ibhekisela esimweni se-alamu).

Nqamula I-alamu Yomlilo Engaxhumi:
Xhuma i-jumper kumatheminali amakwe [GND, RST].
I-Latching Fire Alarm Nqamula:

Xhuma iswishi yokusetha kabusha ethi CHA ngokuvamile evula kumatheminali amakwe okuthi [GND, RST].

1. FACP Dry NC okukhiphayo

Xhuma idivayisi oyifunayo ukuze icushwe okokukhiphayo kokuxhumana kweyunithi kumatheminali amakwe okuthi [NC] kanye no-[C]. Uma i-[EOL JMP] igcinwa injalo, okukhiphayo kungu-0 Ohm ukumelana nesimo esivamile. Uma i-[EOL JMP] isikiwe, ukumelana okungu-10k kuzodluliselwa kudivayisi elandelayo uma isesimweni esivamile.

Izintambo

Sebenzisa i-18 AWG noma enkulu kuwo wonke amavolumu aphansitage ukuxhumana kwamandla.

Ukuxilongwa kwe-LED

I-Tango1B

I-LED	ON	UKUXHUMANA
Okokufaka	Okokufaka ivoltagekhona.	Okokufaka ivoltage akekho.
Ibhethri	Isimo esivamile sokusebenza.	Ibhethri liphansi noma alikho.
I-PoE	Kukhomba Ikilasi.	Bheka ithebula elingezansi kwamakilasi 3-8
Ukugadwa	I-PoE Fail noma i-BAT Fail.	I-NC dry contact 30V 1A (hhayi i-LED)

C	Okuhlaza	Okubomvu	Okuluhlaza okwesibhakabhaka
Ikilasi 1	-	-	-
Ikilasi 2	-	-	-
Ikilasi 3	Valiwe	Valiwe	Valiwe
Ikilasi 4	Valiwe	On	Valiwe

Ikilasi	Okuhlaza	Okubomvu	Okuluhlaza okwesibhakabhaka
Ikilasi 5	On	Valiwe	On
Ikilasi 6	On	Valiwe	On
Ikilasi 7	On	On	On
Ikilasi 8	On	On	On

I-ACMS8 kanye ne-ACMS8CB Access Power Controller

I-LED	ON	VALIWE
I-LED 1- LED 8 (Bomvu)	Ukudluliselwa komphumela kukhishwe amandla.	Ukudluliselwa komphumela kunikwe amandla.
I-FACP	Okokufaka kwe-FACP kucushiwe (isimo se-alamu).	I-FACP evamile (isimo esingesona i-alamu).
Okuphumayo Okuhlaza 1-8	12VDC	-
Okukhipha Okubomvu 1-8	24VDC	-

Ukukhonjwa Kwetheminali

I-Tango1B

I-Terminal/RJ45 Legend	Umsebenzi/Incazelo
I-PoE+ Data Input	Okokufaka kwe-IEEE802.3bt (Umdwebo 5b, ikhasi 7).
Okukhipha Idatha	Idlula Idatha ukuze Ushintshe (Umdwebo 5a, ikhasi 7)
I-C FAIL NC	Amandla Nebhethri Kwehlulekile (Umdwebo 5c, ikhasi 7).
+ 12V -	12VDC okukhiphayo (Umdwebo 5d, ikhasi 7).
+ 24V -	24VDC okukhiphayo (Umdwebo 5e, ikhasi 7).
+ BAT -	Isipele sebhethri ye-Lithium Iron Phosphate (Umdwebo 5f, ikhasi 7).
Isixhumi se-8-Pin (Umdwebo 5g, ikhasi 7)	Imboni exhunywe ku-ACMS8(CB).

I-ACMS8 kanye ne-ACMS8CB Access Power Controller

Isendlalelo seTheminali	Umsebenzi/Incazelo
+ PWR1 -	Imboni exhunywe ku-Tango1B. Ungawasebenzisi lawa matheminali.
+ PWR2 -	Imboni exhunywe ku-Tango1B. Ungawasebenzisi lawa matheminali.
+ INP1 – nge + I-INP8 -	Eziyisishiyagalombili (8) ezizimele ezilawulwa ngokuzimele I- Normally Open (NO), Ivalwe Ngokujwayelekile (NC), I-Open Collector Sink noma I-Wet Input Triggers.
C, NC	Okuphumayo kwe-FACP Dry NC kukalwe 1A/28VDC @ 0.6 Power Factor. Ikilasi 2 lilinganiselwe amandla. Nge-EOL JMP ingaguquki, izohlinzeka ngokumelana no-10k esimweni esijwayelekile.
GND, RST	I-FACP yokuxhuma isixhumi esibonakalayo noma ukungaxhunywali. AKUKHO okokufaka okomile. Ikilasi 2 lilinganiselwe amandla. Izofushaniswa kusixhumi esibonakalayo se-FACP esingaxhumeki noma ukusethwa kabusha kwe-Latch FACP.
GND, EOL	I-EOL Igadwe Amatheminali Okokufaka kwe-FACP yomsebenzi ohlehliswayo we-FACP. Ikilasi 2 lilinganiselwe amandla.
- F, + F, - R, + R	Amatheminali e-FACP Signaling Circuit Inpuit and Return. Ikilasi 2 lilinganiselwe amandla.
Okukhiphayo 1 kuya kokuphumayo 8 NO, C, NC, COM	Okuphumayo okuyisishiyagalombili (8) okulawulwa ngokuzimele okukhethekayo [Fail-Safe (NC) noma Fail-Secure (NO)] kanye nesishiyagalombili (8) okuphumayo okulawulwa ngokuzimele kweFomu “C” Relay.

Umdwebo 5 - Tango8A(CB)

Umdwebo Wohlelo Ojwayelekile

Umdwebo 6

Imidwebo ye-Hook-Up

• Umdwebo 7 - Daisy-chaining eyodwa noma ngaphezulu ACMS8(CB) iyunithi.
  • I-EOL Jumper [EOL JMP] kufanele ifakwe endaweni ye-EOL. Ukungaxhunywa.
• Umfanekiso wesi-8 - Daisy-chaining eyodwa noma ngaphezulu iyunithi ye-ACMS8(CB).
  
  • I-EOL Jumper [EOL JMP] kufanele ifakwe endaweni ye-EOL. Ibamba Ukusetha Kabusha Okukodwa.
• Umfanekiso we-9 - I-Daisy ihlanganisa iyunithi eyodwa noma ngaphezulu ye-ACMS8(CB).
  • I-EOL Jumper [EOL JMP] kufanele ifakwe endaweni ye-EOL. Ilebula Ukusetha kabusha ngakunye.

Imidwebo ye-Hook-Up

• Umdwebo 10 - Okokufaka kokuhlehlisa i-polarity kusuka ku-FACP
  • okukhiphayo kwesifunda (i-polarity ibhekiselwa esimweni se-alamu). Ukungaxhunywa.
• Umdwebo 11 - Okokufaka kokuhlehlisa i-polarity kusuka ku-FACP
  • okukhiphayo kwesifunda (i-polarity ibhekiselwa esimweni se-alamu). I-Latching.
• Umfanekiso we-12 - I-trigger evalekile evalekile (Non-Latching).
• Umfanekiso we-13 - Okokufaka kwe-trigger evalekile
  • (Ukuqhafaza).
• Umfanekiso 14 - Ngokujwayelekile Vula i-trigger input (Non-Latching).
• Umfanekiso 15 - Ngokujwayelekile Vula i-trigger input (Latching).

I-Enclosure Dimensions (BC400)

15.5” x 12.25” x 4.5” (394mm x 311mm x 114mm)

• I-Altronix ayinasibopho sanoma yimaphi amaphutha e-typographical.
• 140 58th Street, Brooklyn, New York 11220 USA
• ifoni: 718-567-8181
• ifeksi: 718-567-9056
• webindawo: www.altronix.com
• i-imeyili: info@altronix.com
• Isiqinisekiso Sokuphila Konke IITango8A(CB) I21U

I-Tango8A

• I-12VDC kanye/noma i-24VDC engakhethwa ngokuphumayo @ 65W max.
• Imiphumela eyisishiyagalombili (8) evikelwe nge-fuse
• Okuyisishiyagalombili (8) okukhethiwe kwe-Fail Safe, Fail-Secure, noma imiphumela eyomile yeFomu “C”
• I-Alamu Yomlilo Nqamula okukhetheke ngokukhiphayo
• Ishaja Yebhethri ye-Lithium Iron Phosphate eyakhelwe ngaphakathi

I-Tango8ACB

• I-12VDC kanye/noma i-24VDC engakhethwa ngokuphumayo @ 65W max.
• Okuphumayo okuvikelwe nge-PTC okukhawulelwe kwe-PTC yesigaba 8 (2) okuyisishiyagalombili (XNUMX).
• Okuyisishiyagalombili (8) okukhethiwe kwe-Fail Safe, Fail-Secure, noma imiphumela eyomile yeFomu “C”
• I-Alamu Yomlilo Nqamula okukhetheke ngokukhiphayo
• Ishaja Yebhethri ye-Lithium Iron Phosphate eyakhelwe ngaphakathi
• Umfundisi TANGO8A-083019 Ngaphezu kwamandla nje.TM Inkampani Yokufaka: _______________
• Igama lommeli wesevisi: ____________________________________________________
• Ikheli: __________________________________________________
• Inombolo yefoni: ____________________

Amadokhumenti / Izinsiza

I-Altronix Tango8A Series Finyelela Izilawuli Zamandla Nge-PoE Driven Power Supply [pdf] Umhlahlandlela Womsebenzisi I-Tango8A Series Access Power Controllers with PoE Driven Power Supply, Tango8A Series, Access Power Controllers with PoE Driven Power Supply, Access Power Controllers, Power Controller PoE Driven Power Supply, Access Controller, Controller PoE Driven Power Supply

Izithenjwa

• Imaniwali yosebenzisayo