I-Altronix Maximal11FV I-Maximal FV Series Izilawuli Zamandla Ezikabili Zokutholakala Kwamandla

Amamodeli afaka phakathi:

Inani eliphakeme kakhulu lama-11FV

• Ukunikezwa kwamandla 1:
  12VDC @ 3.3A noma 24VDC @ 3.6A.
• Ukunikezwa kwamandla 2:
  12VDC @ 3.3A noma 24VDC @ 3.6A.
• Okuphumayo okuvikelwe ngefuse okuyishumi nesithupha (16).
  Inani eliphakeme kakhulu lama-33FV
• Ukunikezwa kwamandla 1:
  12VDC @ 5.3A noma 24VDC @ 5.6A.
• Ukunikezwa kwamandla 2:
  12VDC @ 5.3A noma 24VDC @ 5.6A.
• Okuphumayo okuvikelwe ngefuse okuyishumi nesithupha (16).

Inani eliphakeme kakhulu lama-55FV

• Ukuhlinzekwa kwamandla 1: 12VDC @ 9.3A.
• Ukuhlinzekwa kwamandla 2: 12VDC @ 9.3A.
• Okuphumayo okuvikelwe ngefuse okuyishumi nesithupha (16).

Inani eliphakeme kakhulu lama-75FV

• Ukuhlinzekwa kwamandla 1: 12VDC @ 9.3A.
• Ukuhlinzekwa kwamandla 2: 24VDC @ 9.6A.
• Okuphumayo okuvikelwe ngefuse okuyishumi nesithupha (16).

Inani eliphakeme kakhulu lama-77FV

• Ukuhlinzekwa kwamandla 1: 24VDC @ 9.6A.
• Ukuhlinzekwa kwamandla 2: 24VDC @ 9.6A.
• Okuphumayo okuvikelwe ngefuse okuyishumi nesithupha (16).

Uchungechunge lwe-MaximalFV Seluphelileview

I-Altronix MaximalFV Access Power/Controllers isabalalisa futhi ishintshe amandla ukuze ifinyelele amasistimu okulawula nezisekeli. Baguqula i-220VAC (ububanzi obusebenzayo 198VAC - 256VAC), okokufaka okungu-50/60Hz kube okokukhiphayo okuyishumi nesithupha (16) okulawulwa ngokuzimela okungu-12VDC noma okungu-24VDC okuvikelwe ngefuse. Lawa mandla aphumayo e-Fail-Safe/Fail-Secure angase aguqulelwe ku-dry-form "C" abathintwayo. Okuphumayo kwenziwa kusebenze usinki wokuqoqa ovulekile noma okokufaka okuvamise ukuvuleka (NO) komshini okomile ovela Kusistimu Yokulawula Ukufinyelela, Ikhiphedi, Inkinobho Yokusunduza, i-REX PIR, njll. Amayunithi azohambisa amandla kumadivayisi wehadiwe okulawula ukufinyelela okuhlukahlukene okuhlanganisa: Ama-Mag Locks , Iziteleka zikagesi, Izibambi Zezicabha Zezibuthe, njll. Isixhumi esibonakalayo se-FACP sinika amandla i-Emergency Egress, I-Alarm Monitoring, noma ingase isetshenziselwe ukucupha ezinye izisetshenziswa ezisizayo. Isici sokunqamula i-alamu yomlilo singakhethwa ngasodwa kunoma yikuphi ukuphuma kweshumi nesithupha (16).

Ishadi Lokucushwa Lochungechunge lwe-MaximalFV:

Inombolo Yemodeli ye-Altronix	I-Nominal DC Output Voltage Izinketho								Ukunikezwa Okuphezulu Kwamanje kwe-Main ne-Aux. Okuphumayo (Ukunikezwa kwamandla 1 / Ukuhlinzekwa kwamandla 2) (A)	I-Fuse Evikelwe Okukhiphayo	220VAC 50/60 Hz Okokufaka (okwamanje)	Okwamanje ngokuphumayo ngakunye kwe-ACM8 (A)	Isilinganiso Sokufakwayo Kwebhodi Lokuhlinzekwa Kwamandla	I-Power Supply Board Battery Fuse Rating	I-ACM8 Board Input Fuse Isilinganiso
	Ukunikezwa kwamandla 1				Ukunikezwa kwamandla 2
	[DC]		[AUX]		[DC]		[AUX]
	I-12VDC Output Range (V)	I-24VDC Output Range (V)	I-12VDC Output Range (V)	I-24VDC Output Range (V)	I-12VDC Output Range (V)	I-24VDC Output Range (V)	I-12VDC Output Range (V)	I-24VDC Output Range (V)
Inani eliphakeme kakhulu lama-11FV	I-eFlow4NBV				I-eFlow4NBV				-	16	4.2A	2.5	5A/ 250V	7.5A/ 32V	10A/ 250V
	10.1- 13.2	-	10.05- 13.2	-	10.1- 13.2	-	10.05- 13.2	-	3.3A + 3.3A
	10.1- 13.2	-	10.05- 13.2	-	-	20.28- 26.4	-	20.2- 26.4	3.3A + 3.6A
	-	20.28- 26.4	-	20.2- 26.4	-	20.28- 26.4	-	20.2- 26.4	3.6A + 3.6A
Inani eliphakeme kakhulu lama-33FV	I-eFlow6NBV				I-eFlow6NBV				-	16	4.2A	2.5	5A/ 250V	10A/ 32V	10A/ 250V
	10.0- 13.2	-	10.03- 13.2	-	10.0- 13.2	-	10.03- 13.2	-	5.3A + 5.3A
	10.0- 13.2	-	10.03- 13.2	-	-	20.19- 26.4	-	20.19- 26.4	5.3A + 5.6A
	-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	5.6A + 5.6A
Inani eliphakeme kakhulu lama-55FV	I-eFlow102NBV				I-eFlow102NBV				-	16	4.2A	2.5	5A/ 250V	15A/ 32V	10A/ 250V
	10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-	9.3A + 9.3A
Inani eliphakeme kakhulu lama-75FV	I-eFlow102NBV				I-eFlow104NBV				-	16	4.8A	2.5	5A/250V (eFlow102NBV) 6.3A/250V (eFlow104NBV)	15A/ 32V	10A/ 250V
	10.03- 13.2	-	10.03- 13.2	-	-	20.17- 26.4	-	20.28- 26.4	9.3A + 9.6A
Inani eliphakeme kakhulu lama-77FV	I-eFlow104NBV				I-eFlow104NBV				-	16	5.4A	2.5	6.3A/250V	15A/ 32V	10A/ 250V
	-	20.17- 26.4	-	20.28- 26.4	-	20.17- 26.4	-	20.28- 26.4	9.6A + 9.6A

MaximalFV Series Izici

I-ACM8 Finyelela Amamojula Okulawula Amandla:

• Abayishumi nesithupha (16) bacupha ngokuzimela okuphumayo okulawulwayo. Izinketho zokuphumayo:
  a) Ishumi nesithupha (16) Amandla ahlungiwe e-Fail-Safe.
  b) Ishumi nesithupha (16) Imiphumela yamandla ahlungiwe Yehlulekile-Vikela.
  c) Imiphumela ye-relay yefomu eyishumi nesithupha (16) "C" (ilinganiselwe @ 5A/28VDC noma i-VAC).
  d) Noma iyiphi inhlanganisela yalokhu okungenhla.
• Ishumi nesithupha (16) Uhlelo Lokulawula Ukufinyelela lucupha okokufaka. Izinketho zokucupha okokufaka:
  a) Ishumi nesithupha (16) okokufaka okuvamise ukuvuleka (NO) kwe-trigger eyomile.
  b) Ishumi nesithupha (16) lokungena kwabaqoqi abavuliwe.
  c) Noma iyiphi inhlanganisela yalokhu okungenhla.
• Ishumi nesithupha (16) elihlungiwe i-aux engashintshiwe. ukuphuma kwamandla (okuphumayo kukalwe @ 2.5A).
• Ama-LED abomvu ebhodini le-ACM8 abonisa ukuthi ukuphuma ngakunye kucushiwe (ukudluliselwa kunikwe amandla).
• Ukunqanyulwa kwe-alamu yomlilo (i-latching noma ukungaxhunywanga) kuyakhetheka ngakunye kunoma iyiphi noma yonke imiphumela eyisishiyagalombili (8).
  Izinketho zokufaka i-Fire Alarm:
  a) Ivamise ukuvula (NO) noma kuvame ukuvaleka (NC) okokufaka kwe-trigger okomile.
  b) Okokufaka kokuhlehla kwe-polarity kusuka kusekethi yokusayina ye-FACP.
• I-LED eluhlaza ebhodini le-ACM8 ikhombisa ukuthi ukunqanyulwa kwe-FACP kubaliwe.
• Ukudluliselwa okukhiphayo kwe-FACP kubonisa ukuthi okokufaka kwe-FACP kuyacushwa (ifomu elithi “C” lokuxhumana likalwe @ 1A/28VDC).
• I-eFlow Power Supply/Ishaja inikeza amandla avamile ebhodi le-ACM8 (izintambo zasefekthri) nawo wonke amadivayisi okulawula ukufinyelela axhunyiwe (izintambo zasensimini).
• Amafuse amakhulu ebhodi le-ACM8 akalwe ku-10A. Amafuse okukhiphayo akalwe @ 3.5A. I-eFlow Power Supply/Ishaja:
• Okokufaka: 220VAC 50/60Hz.
• Okokukhipha voltage futhi unikeze ireferensi yamanje ku-MaximalFV Series Configuration Chart, pg. 3.
• Okukhiphayo okusizayo kukalwe @ 1A (akushintshiwe).
• I-Overvoltagukuvikelwa.
• Ishaja eyakhelwe ngaphakathi ye-asidi yomthofu evaliwe noma amabhethri ohlobo lwejeli.
• Inani eliphakeme kakhulu lama-1.54A.
• Shintsha ngokuzenzakalelayo uye kubhethri elilindile lapho i-AC ihluleka. Ukudlulisela emandleni ebhethri alindile kuvele kube khona lapho ngaphandle kokuphazamiseka.
• I-alamu yomlilo egadiwe inqamula (i-latching noma ukungaxhumi) 10K EOL resistor. Isebenza ngesicupha esivamise ukuvula (NO) noma kuvalwe ngokujwayelekile (NC).
• I-AC yehluleka ukugada (ifomu elithi “C” oxhumana nabo).
• Ibhethri liyahluleka nokugadwa ubukhona (ifomu elithi “C” abathintwayo).
• Ukuvala amandla aphansi. Ivala amatheminali okukhiphayo e-DC uma ibhethri linomthamotage yehla ngaphansi kuka-71-73% kumayunithi angu-12V kanye no-70-75% kumayunithi angu-24V (kuye ngokuthi ukunikezwa kwamandla). Ivimbela ukuphuma kwebhethri okujulile.
• Ukuze uthole izilinganiso ze-fuse bheka Ishadi Lokucupha Lochungechunge lwe-MaximalFV, pg. 3.
• I-Green AC Power LED ikhombisa i-220VAC ekhona.
• Okokufaka kwe-AC kanye nezinkomba ze-LED ze-DC.
• Isekhethi emfishane nokuvikela ukulayisha ngokweqile.
• Indawo ebiyelwe ithatha amabhethri angafika kwamane (4) 12VDC/12AH.
  Ubukhulu bendawo (H x W x D): 26” x 19” x 6.25” (660.4mm x 482.6mm x 158.8mm).

Imiyalelo yokufaka enkulu yeFV

Izindlela zokufaka izintambo zizohambisana Nekhodi Kagesi Kazwelonke/NFPA 70/ANSI, Ikhodi Kagesi yase-Canadian, Ingxenye I, Ingxenye II kanye nawo wonke amakhodi endawo neziphathimandla ezinegunya. Umkhiqizo uhloselwe ukusetshenziswa endlini
kuphela.

• Ukuxilongwa kwe-LED ye-Power Supply Board
• Finyelela ekuhloleni kwe-LED yesilawuli samandla
• Umazisi wetheminali Yebhodi Lokuphakela Amandla
• Finyelela Ekuhlonzeni Kwetheminali yesilawuli samandla
• Izicaciso zebhethri zebhodi lokuhlinzeka ngogesi
• Ukuphuma Kwebhodi Lokuhlinzeka Ngamandla VoltagIzilungiselelo
• Finyelela Isilawuli Samandla Esijwayelekile Somdwebo Wohlelo
• Imidwebo ye-FACP/Ongakukhetha Yokunikezela Amandla

1. Faka iyunithi endaweni oyifunayo. Maka futhi ubhoboze izimbobo odongeni ukuze uhambisane nezimbobo zokhiye ezintathu eziphezulu endaweni ebiyelwe. Faka izixhumi ezintathu eziphezulu nezikulufi odongeni amakhanda e-screw aphumele ngaphandle. Beka izimbobo zokhiye ezingaphezulu kwendawo ebiyelwe phezu kwezikulufu ezintathu ezingenhla, ileveli futhi ivikelekile. Maka indawo yezimbobo ezintathu ezingezansi. Susa indawo ebiyelwe. Geza izimbobo ezingezansi bese ufaka izibophelelo ezintathu. Beka izimbobo zokhiye ezingenhla zesivikelo phezu kwezikulufu ezintathu ezingaphezulu. Faka izikulufu ezintathu ezingezansi bese uqinisekisa ukuthi uqinisa zonke izikulufu (I-Enclosure Dimensions, pg.).
2. Xhuma amandla e-AC angashintshiwe (220VAC 50/60Hz) kumatheminali amakwe okuthi [L, N] (Fig. 3,).
   Sebenzisa i-14 AWG noma enkulu kukho konke ukuxhumana kwamandla. Intambo eluhlaza okotshani evikelekile iholela kugange lomhlabathi.
   Gcina izintambo ezikhawulelwe amandla zihlukene nezintambo ezingenamandla anomkhawulo.
   Kufanele kunikezwe isikhala esincane esingu-0.25”.
   ISEXWAYISO: Ungathinti izingxenye zensimbi eziveziwe. Vala amandla esekethe yegatsha ngaphambi kokufaka noma ukusevisa amathuluzi. Azikho izingxenye ezisebenzisekayo zomsebenzisi ngaphakathi. Bheka ukufakwa nokusevisa kubasebenzi benkonzo abaqeqeshiwe.
3. Khetha ivolumu oyifunayo ye-DCtage ngokusetha i-SW1 endaweni efanele ebhodini lokuphakela amandla (Maximal11FV kanye ne-Maximal33FV, Fig. 1, pg. 9). Ukunikezwa kwamandla ka-Maximal55F kusethwe efekthri ku-12VDC. Ukunikezwa kwamandla kaMaximal77F kusethwe efekthri ku-24VDC. I-Maximal75F iqukethe ibhodi elilodwa (1) lokuphakela amandla okuyifekthri esethwe ku-12VDC, kanye nebhodi elilodwa (1) lokuphakela amandla elisethwe efekthri ku-24VDC.
4. Linganisa umthamo wokukhiphayotage yeyunithi ngaphambi kokuxhuma noma imaphi amadivaysi ukuze kuqinisekiswe ukusebenza okufanele.
   Ivolumu engafanele noma ephezulutage izolimaza lawa madivayisi.
5. Izinketho zokuphumayo (Umdwebo 2,):
   Iyunithi izohlinzeka ngokuphuma kwamandla ashintshiwe ayishumi nesithupha (16), okuphumayo okuyishumi nesithupha (16) omile kwefomu “C”, noma iyiphi inhlanganisela yakho kokubili amandla ashintshiwe kanye nefomu elithi “C” eliphumayo.
   (a) Okukhiphayo Amandla Okushintshwa Kwe-Fail-Safe:
   Ngomsebenzi Wokuhluleka Kokuphepha xhuma okokufaka okuhle (+) kwemishini yokulawula ukufinyelela kutheminali ephawulwe
   [NC]. Xhuma okokufaka okunegethivu (–) kwamadivayisi okulawula ukufinyelela kutheminali ephawulwe ngokuthi [COM].
   (b) Imiphumela Yamandla Eshintshiwe Ye-Fail-Secure:
   Ngomsebenzi Wokuhluleka Kokuvikela xhuma okokufaka okuhle (+) kwamadivayisi okulawula ukufinyelela kutheminali ephawulwe ngokuthi [NO]. Xhuma okokufaka okunegethivu (–) kwamadivayisi okulawula ukufinyelela kutheminali ephawulwe ngokuthi [COM].
   (c) Imiphumela yefomu “C”:
   Uma okuphumayo kwefomu elithi “C” kufunwa amafuse okukhiphayo ahambisanayo (1-8) ebhodi ngalinye le-ACM8 kufanele akhishwe.
6. I-ACM8 Amandla Esizayo (ayishintshiwe):
   Xhuma amadivaysi okulawula ukufinyelela adinga amandla angaguquki kumatheminali amakwe okuthi [C] phozithivu (+) kanye [COM] negethivu (–). Okukhiphayo kungasetshenziswa ukunikeza amandla ezifundi zamakhadi, izinkinobho njll. Okuphumayo kwe-eFlow Auxiliary (okungashintshiwe):
   Ekuxhumekeni kwensiza yedivayisi lokhu okukhiphayo ngeke kuthinteke Ukunqamula Amandla Aphansi noma I-alamu Yomlilo
   Isixhumi esibonakalayo. Xhuma idivayisi kumatheminali amakwe [+ AUX –] (Fig. 3,).
7. Izinketho zokucupha okokufaka (Fig. 2):
   (a) Ngokuvamile Vula inhlamvu yokokufaka engu-[NO]:
   Okokufaka 1-8 kwenziwa kusebenze okokufaka okuvamise ukuvuleka noma okuvuliwe komqoqi wokuqoqa. Xhuma ukuphuma kwephaneli yokulawula ukufinyelela, amakhiphedi, izinkinobho zokucindezela, ama-REX PIR, njll. kumatheminali amakwe okuthi [IN] kanye nokuthi [GND].
   (b) Vula okokufaka Kosinki Wokuqoqa:
   Xhuma iphaneli yokulawula ukufinyelela evulekile yokuqoqa usinki ephozithivu (+) kumatheminali aphawulwe ngokuthi [IN] kanye negethivu (–) kumatheminali abhalwe [GND].
8. Izinketho ze-ACM8 Fire Alarm Interface (Amakhiwane 5-9):
   I-[NC] evamise ukuvala noma i-trigger evamise ukuvula okuthi [NO] kusuka kuphaneli yokulawula i-alamu yomlilo noma okokufaka okubuyisela emuva i-polarity kusuka kumjikelezo wokusayinda we-FACP kuzothinta okuphumayo okukhethiwe. Ukuze unike amandla i-FACP Nqamula ukuze uthole okukhiphayo, vala ukushintshwa okuhambisanayo [SW1-SW8] ebhodini ngalinye le-ACM8. Ukuze ukhubaze ukunqanyulwa kwe-FACP kokuphumayo, vula amaswishi ahambisanayo [SW1-SW8] ebhodini ngalinye le-ACM8.
   (a) Ngokuvamile Vula okuthi [NO] okokufaka:
   Ukuze uthole i-hook-up engaxhunywanga bheka ku-Fig. 6,. Ukuze uthole i-latching hook-up bheka ku-Fig. 7,.
   (b) Okokufaka okuvamise ukuvalwa [NC]:
   Ukuze uthole i-hook-up engaxhunywanga bhekisela ku-Fig. 8. Ukuze uthole i-hook-up yokuxhuma bhekisela ku-Fig. 9,.
   (c) I-FACP Signaling Circuit input trigger:
   Xhuma iphozithivu (+) nenegethivu (–) kusukela okukhiphayo kwesekethe ye-FACP kumatheminali amakwe [+ INP –]. Xhuma i-FACP EOL kumatheminali amakwe [+ RET –] (i-polarity ibhekisela esimweni se-alamu). I-Jumper etholakala eduze kwe-TRG LED kufanele isikwe (Fig. 6).
9. I-FACP Dry form "C" okukhiphayo (Ayihlolwa yi-UL) (Fig. 2a):
   Oxhumana nabo befomu le-FACP elithi “C” bangasetshenziselwa ukucupha ukubika noma ukusayina amadivayisi. Laba othintana nabo bashintshela kumshini wokufaka i-alamu yomlilo kumabhodi e-ACM8.
10. Izixhumi Zebhethri Ezilindile (Umdwebo 3):
    Ngezinhlelo zokusebenza Zokulawula Ukufinyelela amabhethri ayakhethwa. Uma amabhethri engasetshenziswa, ukulahlekelwa yi-AC kuzoholela ekulahlekeni kwevolthi yokuphumayotage. Uma kufunwa ukusetshenziswa kwamabhethri alindile, kumele abe yi-lead acid noma uhlobo lwejeli.
    Xhuma ibhethri kumatheminali amakwe [- BAT +] (Fig. 3, pg. 10). Sebenzisa amabhethri amabili (2) 12VDC axhunywe ochungechungeni lokusebenza kwe-24VDC (amabhethri afakiwe afakiwe). Sebenzisa amabhethri – Casil CL1270 (12V/7AH), CL12120
    (12V/12AH), CL12400 (12V/40AH), CL12650 (12V/65AH) amabhethri noma amabhethri abonwa yi-UL BAZR2 kanye ne-BAZR8 esilinganiso esifanele.
11. Imiphumela yebhethri ne-AC Supervision (Fig. 3):
    Kudingeka ukuxhuma idivayisi yokubika inkinga yokugada emiphumeleni ephawulwe ngokuthi [AC Fail, BAT Fail] kokuphumayo kokudluliswa kokugada okumakwe [NC, C, NO] kumadivayisi afanelekile esaziso esibonakalayo.
    Sebenzisa ama-22 AWG ukuya ku-18 AWG ngokuhluleka kwe-AC kanye nokubika kwebhethri eliphansi/alikho.
12. Ukuze ubambezele ukubika kwe-AC amahora angu-2., setha i-dip switch [Ukubambezeleka kwe-AC] iye endaweni YOKUVALA (Fig. 3).
    Ukuze ubambezele ukubika kwe-AC iminithi elingu-1, setha i-dip switch [Ukubambezeleka kwe-AC] ibe ON isikhundla (Fig. 3).
13. Ukunqamula I-alamu Yomlilo (Fig. 3):
    Ukuze unike amandla i-alamu yomlilo Nqamula setha inkinobho yokudipha [Vala shaqa] ibe IVULIWE endaweni.
    Ukuze ukhubaze i-alamu yomlilo Nqamula setha inkinobho yokucwilisa [Vala shaqa] ibe yindawo YOKUVALA.
14. Ukufakwa kwe-tamper switch (Ayifakiwe) (Fig. 3b):
    I-Mount UL Ifakwe ohlwini lwe-tamper switch (Honeywell Model 112 noma okulinganayo) phezulu kwendawo ebiyelwe. Shelelezisa i-tamper shintsha ubakaki onqenqemeni lwendawo ebiyelwe cishe u-2” ukusuka kwesokudla (Fig. 3b).
    Xhuma tampshintsha izintambo kokokufaka kwe-Access Control Panel noma umbiko ofanelekile Osohlwini lwe-UL
    idivayisi. Ukucupha isignali ye-alamu vula umnyango wendawo ebiyelwe.
15. Okokufaka okuningi kwamandla kagesi (Umdwebo 2):
    Uma usebenzisa amandla angaphandle angeziwe, ama-jumpers J1 kanye ne-J2 atholakala ebhodini le-ACM8 elihambisanayo kufanele asikwe (Umfanekiso 2c, 2d, noFig. 5). Xhuma amandla okulawula ukungena angaphandle kumatheminali aphawulwe ngokuthi [– Control +] (Lawa matheminali ahambisana namatheminali [– Amandla +]). Uma usebenzisa izinsiza zamandla e-DC, kufanele kuqashelwe i-polarity. Uma usebenzisa izinsiza zamandla e-AC, i-polarity ayidingi ukubonwa (Fig. 2d, pg. 9). Konke ukuxhunywa kwezintambo zenkambu kufanele kwenziwe kusetshenziswa igeji efanelekile yocingo oluyi-CM noma i-FPL enejakhethi (noma enye into efanayo) (Fig. 4a).

Isondlo

Iyunithi kufanele ihlolwe okungenani kanye ngonyaka ukuze isebenze ngendlela efanele ngale ndlela elandelayo:

Ukugadwa kwe-FACP: Ukuqinisekisa ukuxhumeka okufanele nokusebenza kwe-Fire Alarm nqamula i-hookup. Sicela ulandele inqubo efanele ngezansi:

Okokufaka Okujwayelekile: Ukubeka iDemo phakathi kwamatheminali amakwe ngokuthi [T] kanye nokuthi [+ INP] kuzoqalisa Ukunqamula I-alamu Yomlilo. Susa okufushane ukuze usethe kabusha.

Okokufaka Okuvalekile: Ukukhipha intambo kutheminali ephawulwe ngokuthi [INP –] kuzocupha Ukunqamula I-alamu Yomlilo. Shintsha intambo uye kutheminali ephawulwe ngokuthi [INP –] ukuze isethwe kabusha.
Okokufaka Kwesekethe Yesiginali ye-FACP: Kuyadingeka ukuqalisa Isistimu Ye-alamu Yomlilo. Kuzo zonke lezi zimo ezingenhla i-TRG LED eluhlaza yama-ACM8s izokhanyisa. Yonke imiphumela ekhethelwe Ukunqamula i-Fire Alarm izovula ukukhiya amadivayisi.

Qaphela: Yonke imiphumela [OUT 1] – [OUT 8] kumele ibe sesimweni esijwayelekile (sokungabi namandla) ngaphambi kokuhlolwa. Uma iyunithi ilungiselwe Ukuvula Okujwayelekile (Umfanekiso 8) noma Okuvamise Ukuvala (Fig. 10), kuyadingeka ukusetha kabusha Ukunqamula I-alamu Yomlilo ngokuvula iswishi yokusetha kabusha Okuvamise Ukuvaleka.

Okukhipha Umqtage Test: Ngaphansi kwezimo ezijwayelekile zokulayisha, ivolumu yokuphuma kwe-DCtage kufanele ihlolwe ivolumu efaneletage level (bheka Ishadi Lokucupha lochungechunge lwe-MaximalF).

Ukuhlolwa Kwebhethri: Ngaphansi kwezimo ezijwayelekile zokulayisha hlola ukuthi ibhethri ishajwe ngokugcwele, hlola ivolumu ecacisiwetage kumatheminali ebhethri nasematheminali ebhodi aphawulwe ngokuthi [+ BAT –] ukuze kuqinisekiswe ukuthi akukho ukunqamuka kwezintambo zokuxhuma ibhethri.
Qaphela: Isilinganiso esiphezulu senkokhelo yamanje ngu-1.54A. Impilo yebhethri elindelwe iminyaka emi-5; kodwa-ke, kunconywa ukushintsha amabhethri phakathi neminyaka emi-4 noma ngaphansi uma kunesidingo.

Ukuxilongwa kwe-LED ye-Power Supply Board:

Okubomvu (DC)	Okuluhlaza (AC/AC1)	Isimo Sokuhlinzeka Ngamandla
ON	ON	Isimo esivamile sokusebenza.
ON	VALIWE	Ukulahleka kwe-AC. Ibhethri elilindile linikeza amandla.
VALIWE	ON	Akukho okukhiphayo kwe-DC.
VALIWE	VALIWE	Ukulahleka kwe-AC. Ibhethri elivuliwe noma alikho. Akukho okukhiphayo kwe-DC.

 

Okubomvu (Ilulwane)	Isimo Sebhethri
ON	Isimo esivamile sokusebenza.
VALIWE	Ibhethri liyahluleka/ibhethri liphansi.

Ukuhlola i-LED yesilawuli samandla:

I-LED	ON	VALIWE
I-LED 1- LED 8 (Bomvu)	Ukudluliselwa komphumela kunikwe amandla.	Ukudluliselwa komphumela kukhishwe amandla.
I-Trg (Green)	Okokufaka kwe-FACP kucushiwe (isimo se-alamu).	I-FACP evamile (isimo esingesona i-alamu).

Imininingwane Yebhethri Yebhodi Lokuhlinzeka Ngamandla:

Ibhethri	Isilinganiso esiphezulu11F	Isilinganiso esiphezulu33F	I-Maximal55F, i-Maximal75F, ne-Maximal77F
7AH	30 Amaminithi./4A	10 Amaminithi./6A	5 Amaminithi./10A
12AH	35 Amaminithi./4A	30 Amaminithi./6A	30 Amaminithi./10A
40AH	Ngaphezu kwamahora ama-4/4A	Ngaphezu kwamahora ama-4/6A	Ngaphezu kwamahora ama-2/10A
65AH	Ngaphezu kwamahora ama-4/4A	Ngaphezu kwamahora ama-4/6A	Ngaphezu kwamahora ama-4/10A

Umazisi wetheminali Yebhodi Lokuhlinzeka Ngamandla:

Isendlalelo seTheminali	Umsebenzi/Incazelo
L, G, N	Xhuma i-220VAC 50/60Hz kulawa matheminali: L ukuya kokushisayo, N kokumaphakathi. Ungayisebenzisi itheminali ephawulwe ngokuthi [G].
+ DC -	Imboni exhunywe ebhodini le-ACM8.
Qalisa i-EOL Igadwe	I-Fire Alarm Interface icupha okokufaka okuvela kufushane noma i-FACP. Okokufaka kwe-trigger ngokuvamile kuvame ukuvuleka, kuvame ukuvalwa kusukela kumjikelezo ophumayo we-FACP (okufakwayo okulinganiselwe amandla) (Umdwebo 3, ikhasi 10).
CHA, I-GND SETHA KABUSHA	Ukuxhuma isixhumi esibonakalayo se-FACP noma ukungaxhumeki (amandla anomkhawulo) (Umdwebo 3, ikhasi 10).
+ AUX -	I-axiliary power-limited output ilinganiselwe ngo-@1A (ayishintshiwe) (Umdwebo 3, ikhasi 10).
I-AC FAIL NC, C, NO	Ibonisa ukulahleka kwamandla e-AC, isb. xhuma kudivayisi ezwakalayo noma iphaneli ye-alamu. Ukudlulisa kuvamise ukuba namandla uma amandla e-AC ekhona. Isilinganiso sothintana naye 1A @ 30VDC (amandla-alinganiselwe) (Umdwebo 3, ikhasi 10).
BAT FAIL NC, C, NO	Ibonisa isimo sebhethri eliphansi, isb. xhuma kuphaneli ye-alamu. Ukudluliselwa kuvame ukunikwa amandla uma amandla e-DC ekhona. Isilinganiso sothintana naye 1A @ 30VDC. Ibhethri elikhishiwe libikwa emizuzwini emi-5. Ukuxhunywa kabusha kwebhethri kubikwe phakathi neminithi elingu-1 (amandla anomkhawulo) (Fig. 3, pg. 10).
+ BAT -	Ukuxhumana kwebhethri okulindile. Inani eliphakeme kakhulu lama-1.54A lamanje (akunawo amandla alinganiselwe) (Fig. 3, pg. 10).

Ubunikazi betheminali yesilawuli samandla:

Isendlalelo seTheminali	Umsebenzi/Incazelo
- Amandla +	I-12VDC noma i-24VDC evela ekunikezeni amandla/ishaja (ifekthri ixhunyiwe). Lawa matheminali ahambisana namatheminali [- Control +].
– Control +	Lawa matheminali ahambisana namatheminali [- Amandla +]. Lawa matheminali angaxhunywa kusilawuli samandla sokufinyelela esikhawulelwe sangaphandle esisohlwini lwangaphandle ukuze kuhlinzekwe ngamandla okusebenza awodwa wamadivayisi (Akukahlolwa i-UL). Ama-Jumpers J1 kanye ne-J2 kufanele asuswe.
I-TRIGGER INPUT 1- INPUT 8 IN, GND	Ukusuka kokujwayelekile okuvulayo kanye/noma okuvulayo okucuphayo okuqoqile okucuphayo (isicelo sokuphuma kwezinkinobho, ukuphuma kwama-pir, njll.)
OPHUMA 1- UMPHUMELA 8 NC, C, NO, COM	I-12VDC ukuya ku-24VDC icupha ukuphuma okulawulwayo. Umthamo omkhulu wokulayisha ngakunye okukhiphayo ngu-2.5A.
	Maximal11FV: P/S 1 – 10.1-13.2VDC @ 3.3AP/S 2 – 10.1-13.2VDC @ 3.3A noma P/S 1 – 20.28-26.4VDC @ 3.6AP/S 2 – 20.28-26.4VDC P/S 3.6 – 1-10.1VDC @ 13.2A kanye ne-P/S 3.3 – 2-20.28VDC @ 26.4A.
	Maximal33FV: P/S 1 – 10.0-13.2VDC @ 5.3AP/S 2 – 10.0-13.2VDC @ 5.3A noma P/S 1 – 20.28-26.4VDC @ 5.6AP/S 2 – 20.28-26.4VDC P/S 5.6 – 1-10.0VDC @ 13.2A kanye ne-P/S 5.3 – 2-20.28VDC @ 26.4A.
	I-Maximal55FV: P/S 1 – 10.03-13.2VDC @ 9.3A kanye ne-P/S 2 – 10.03-13.2VDC @ 9.3A.
	I-Maximal75FV: P/S 1 – 10.03-13.2VDC @ 9.3A kanye ne-P/S 2 – 20.17-26.4VDC @ 9.6A.
	I-Maximal77FV: P/S 1 – 20.17-26.4VDC @ 9.6A kanye ne-P/S 2 – 20.17-26.4VDC @ 9.6A.
	I-Fail-Safe [i-NC positive (+) & ne-COM Negative (–)], I-Fail-Vikel [AKUKHO okuhle (+) & COM Negative (–)], okukhiphayo okusizayo [C positive (+) & COM Negative (–)] ( Uma usebenzisa i-AC power supply polarity ayidingi ukubonwa), i-NC, C, NO iguqulela efomini elomile elithi “C” 5A 24VAC/VDC ilinganisele ukuphuma okomile lapho amafuse esuswa. Oxhumana nabo baboniswe esimweni esingacushiwe.
I-FACP INTERFACE T, + INPUT –	I-Fire Alarm Interface icupha okokufaka okuvela ku-FACP. Okokufaka kwe-trigger ngokuvamile kuvame ukuvuleka, kuvame ukuvalwa kusukela ekuphumeni kwesekethe yokusayinda ye-FACP (Amakhiwane 5-9, ikhasi 12).
I-FACP INTERFACE NC, C, NO	Othintana naye wefomu “C” odluliselwe ukalwe @ 1A 28VDC ngokubika nge-alamu (akukahlolwa yi-UL).

Ukuphuma Kwebhodi Lokuhlinzeka Ngamandla Voltage Izilungiselelo:

Finyelela Isilawuli Samandla Umdwebo Ojwayelekile Wohlelo Lokusebenza (ku-ACM8 ngayinye):

Umfanekiso wesi-3 - Uchungechunge lwe-FV olukhulu

ISEXWAYISO: Uma ibhodi yokuphakela amandla isethelwe i-12VDC sebenzisa ibhethri elilodwa kuphela (1) 12VDC elimele.
Gcina izintambo ezikhawulelwe amandla zihlukene kokungewona amandla akhawulelwe.
Sebenzisa isikhala esincane esingu-0.25″.
12AH Amabhethri aphinde ashajwa amabhethri amakhulu kakhulu angangena kule ndawo ebiyelwe. Indawo evalekile yebhethri yangaphandle esohlwini lwe-UL kufanele isetshenziswe uma kusetshenziswa amabhethri angu-40AH noma angu-65AH.

Izidingo ze-NEC Power-Limited Wiring:
Izintambo ezilinganiselwe zikagesi nezingewona amandla alinganiselwe kufanele zihlale zihlukene kukhabhinethi. Zonke izintambo zesekethe ezinomkhawulo wamandla kufanele zihlale okungenani zingu-0.25” kude nanoma yiziphi izintambo ezingezona amandla alinganiselwe. Ngaphezu kwalokho, zonke izintambo zesekethe ezilinganiselwe amandla kanye nezintambo ezingenawo amandla alinganiselwe kufanele zingene futhi ziphume kukhabhinethi ngamapayipi ahlukene.
Omunye onjalo examplokhu kuboniswe ngezansi. Uhlelo lwakho lokusebenza oluthile lungase ludinge ukuthi kusetshenziswe izindlela ezahlukene zokukhonkotha komsele. Kungase kusetshenziswe noma yikuphi ukukhishwa komsele. Kuzinhlelo zokusebenza ezikhawulelwe amandla ukusebenzisa ipayipi kungakhethwa. Konke ukuxhunywa kwezintambo zasenkambu kufanele kwenziwe kusetshenziswa igeji efanelekile yocingo oluyi-CM noma i-FPL enejakhethi (noma enye into efanayo).
Indawo engakhethwa yebhethri esohlwini lwe-UL kufanele igxunyekwe eduze nendawo yamandla ngokusebenzisa izindlela zezintambo Zekilasi 1.
Ukufakwa kwe-Canadian sebenzisa izintambo ezivikelekile kukho konke ukuxhumana.
Qaphela: Bheka umdwebo wokubamba izintambo ngezansi ukuze uthole indlela efanele yokufaka intambo enejakhethi ye-CM noma ye-FPL (Fig. 4a).

 

Imidwebo ye-FACP Hook-Up

Umdwebo 5 Ukuhlanganisa ongakukhetha kusetshenziswa okokufaka okubili (2) okuhlukene kokuphakelwa kwamandla (Kusebenza kuphela ku-Maximal11F, ayihlolwanga yi-UL):

Umdwebo 6 Okokufaka kokuhlehla kwe-polarity okuvela kumjikelezo wokusayinda we-FACP (i-polarity ibalulwe esimweni se-alamu):

Umdwebo 7 Ngokuvamile Kuvulwa: Okokufaka kwe-FACP engaxhunywanga:

Umdwebo 8 Ngokuvamile Vula okokufaka kwe-FACP Latching trigger ngokusetha kabusha:

Umdwebo 9 Ngokuvamile kuvalwe: Okokufaka kwe-FACP engaxhunywanga:

Umdwebo 10 Ngokuvamile Kuvalwa: Ukuxhuma i-FACP icupha okokufaka ngokusetha kabusha:

Ubukhulu Bendawo (H x W x D cishe):
26” x 19” x 6.25” (660.4mm x 482.6mm x 158.8mm)

I-eFlow Power Supply/Charger ingalawulwa futhi iqashwe ngenkathi Ibika Amandla/Ukuxilongwa Kusuka Noma Kukuphi Ngenethiwekhi...

I-LINQ2 – Imojula Yokuxhumana Yenethiwekhi
I-LINQ2 inikeza ukufinyelela kwe-IP okude kudatha yesikhathi sangempela evela ku-eFlow power supply/ charger ukusiza ukugcina amasistimu esebenza futhi kumazinga afanele. Isiza ukufakwa nokusetha okusheshayo nokulula, inciphise isikhathi sokuphumula sesistimu, futhi isuse amakholi esevisi angadingekile, okusiza ukwehlisa Ingqikithi Yezindleko Zobunikazi (TCO) - kanye nokudala umthombo omusha Wemali Engenayo Ephindaphindwayo Yanyanga zonke (RMR).

Izici:

• I-UL Ifakwe ohlwini e-US naseCanada.
• Ukulawulwa kwasendaweni noma okude kokufika koku (2) kokuphuma kwamandla okubili kwe-Altronix eFlow nge-LAN kanye/noma i-WAN.
• Gada ukuxilonga ngesikhathi sangempela: DC okukhipha voltage, okukhiphayo okwamanje, i-AC & nesimo sebhethri/isevisi, ukuguqulwa kwesimo se-trigger yokufaka, ukushintsha kwesimo sokuphumayo nezinga lokushisa leyunithi.
• Ukulawula ukufinyelela nokuphatha komsebenzisi: Khawulela ukufunda/ukubhala, Khawulela abasebenzisi kuzinsiza ezithile
• Okubili (2) kwenethiwekhi ebalulekile elawulwayo Yefomu “C” Ukudlulisa.
• Izibangeli zokufaka ezihlelekayo ezintathu (3): Lawula ukudluliselwa kwamandla kanye nemithombo yamandla ngemithombo yangaphandle yehadiwe.
• Izaziso ze-imeyili ne-Windows Dashboard
• Irekhodi lomcimbi lilandelela umlando.
• Secure Socket Layer (SSL).
• Ingahleleka nge-USB noma web isiphequluli – sifaka isofthiwe esebenzayo nekhebula le-USB elingu-6 ft.

I-LINQ2 Igibelela Ngaphakathi kwanoma iyiphi I-MaximalF Enclosure

I-Altronix ayinasibopho sanoma yimaphi amaphutha e-typographical.
140 58th Street, Brooklyn, New York 11220 USA | ifoni: 718-567-8181 | ifeksi: 718-567-9056
webindawo: www.altronix.com
i-imeyili: info@altronix.com
Iwaranti yempilo yonke
IIMaximal11FV/33FV/55FV/75FV/77FV Series H11U

I-Maximal11VF/33FV/55FV/75FV/77V Series Izilawuli Zamandla Okufinyelela (Fused) Umhlahlandlela wokufaka

Amadokhumenti / Izinsiza

I-Altronix Maximal11FV I-Maximal FV Series Izilawuli Zamandla Ezikabili Zokutholakala Kwamandla [pdf] Umhlahlandlela wokufaka I-Maximal11FV, i-Maximal55FV, i-Maximal11FV I-Maximal FV Series Izilawuli Zamandla Ezimbili Zokutholakala Kwamandla, i-Maximal11FV, i-Maximal FV Series I-Dual Power Supply Access Controllers, Izilawuli Zamandla Okufinyelela, Izilawuli Zamandla, Izilawuli

Izithenjwa

• Imaniwali yosebenzisayo