I-Altronix Maximal R Series Rack Mount Access Power Controllers (ihlanganisiwe) Incwadi Yomsebenzisi

Kuphelileview:

Amayunithi e-Altronix Maximal Rack Mount Series asabalalisa futhi ashintshe amandla ukuze afinyelele amasistimu okulawula nezinsiza. Baguqula okokufaka okungu-115VAC, 50/60Hz kube okokukhiphayo okuvikelwe yi-fuse eyisishiyagalombili (8) noma eyishumi nesithupha (16) elawulwa ngokuzimela kanye/noma engu-12VDC. Okukhiphayo kwenziwa kusebenze okokufaka okuvamise ukuvuleka (NO) noma okuvamise ukuvala (NC) okomile okuvalwe kusukela ku-Access Control System, i-Card Reader, ikhiphedi, i-Push Button, i-PIR, njll. Amayunithi azohambisa amandla kumadivayisi ehadiwe okulawula ukufinyelela okuhlukahlukene okuhlanganisa : Ama-Mag Locks, Iziteleka zikagesi, Izibambi Zezicabha Zemagnetic, njll. Okukhiphayo kuzosebenza kuzo zombili izindlela Zokuhluleka-Ukuphepha kanye/noma Ukuhluleka Kokuvikela. Isixhumi esibonakalayo se-FACP sinika amandla i-Emergency Egress, i-Alarm Monitoring, noma ingase isetshenziselwe ukucupha ezinye izisetshenziswa ezisizayo. Isici sokunqamula i-alamu yomlilo singakhethwa ngasodwa kunoma yimiphi noma yonke imiphumela (bona ishadi elingezansi).

Ishadi Lokulungiselela I-Maximal Rack Mount Series:

I-Altronix Inombolo Yemodeli	Ukunikezwa kwamandla 1 (8 okukhiphayo)	Ukunikezwa kwamandla 2 (8 okukhiphayo)	Inani Lokukhiphayo Kwamanje	I-Fuse Evikelwe Okukhiphayo	Ubuningi Bamanje Nge-ACM8R-M Okukhiphayo	115VAC 50/60Hz Okokufaka (umdwebo wamanje)	Isilinganiso Sokufakwayo Kwebhodi Lokuhlinzekwa Kwamandla
Isilinganiso esiphezulu1RH	12VDC @ 4A	N/A	4A	8	2.5A	1.9A	5A/250V
	24VDC @ 3A	N/A	3A
Isilinganiso esiphezulu1R	12VDC @ 4A	N/A	4A	16	2.5A	1.9A	5A/250V
	24VDC @ 3A	N/A	3A
Isilinganiso esiphezulu3RH	12VDC @ 6A	N/A	6A	8	2.5A	1.9A	3.5A/250V
	24VDC @ 6A	N/A
Isilinganiso esiphezulu3R	12VDC @ 6A	N/A	6A	16	2.5A	1.9A	3.5A/250V
	24VDC @ 6A
Isilinganiso esiphezulu33R	12VDC @ 6A	12VDC @ 6A	12A	16	2.5A	3.8A	3.5A/250V
	24VDC @ 6A	24VDC @ 6A
	12VDC @ 6A	24VDC @ 6A

Imininingwane:

Okufakiwe:
Imininingwane:

Isipele Sebhethri:

• Ngokuvamile kuvala i-[NC] noma kuvame ukuvula okuthi [NO] okokufaka othintana naye okomile (ukushintsha kuyakhetheka).

Okuphumayo:

• I-Mag Lock/Strike ekhethwa ngazinye (I-Fiil-Safe, Yehluleka-Vikela) amandla avikelwe i-fuse yesimo esiqinile
• Ukuvikelwa kwesekethi eshisayo nefushane nge-auto

I-Fire Alarm Interface:

• Ukunqanyulwa kwe-alamu yomlilo (ukuxhunywa ngokusetha kabusha noma okungaxhunywanga) kungakhethwa ngakunye kunoma iyiphi noma yonke imiphumela.
• Ikhono lokusetha kabusha isilawuli kude sokuxhuma i-Fire Alarm Interface
• Izinketho zokufaka ze-Fire Alarm:
  1. Ivamise ukuvula okuthi [NO] noma kuvalwe othintana naye okomile okungu-[NC]
  2. Okokufaka kokuhlehla kwe-polarity okuvela ekusayineni kwe-FACP

Izinkomba Ezibonakalayo:

• Ama-LED wesimo sokukhiphayo angawodwana atholakala kuphaneli engaphambili.

Isipele Sebhethri:

• Ishaja eyakhelwe ngaphakathi ye-asidi yomthofu evaliwe noma amabhethri ohlobo lwejeli

(Indawo ebiyelwe ehlukile iyadingeka kumabhethri).

• Inani eliphakeme kakhulu lama-7A.
• Shintsha ngokuzenzakalelayo kwibhethri elilindile uma i-AC
• I-Zero voltaguyawa lapho iyunithi ishintshela kukhophi yasenqolobaneni yebhethri (isimo sokuhluleka kwe-AC).

Ukugada:

• I-AC yehluleka ukugada (ifomu elithi “C” loxhumana naye).
• Ukugadwa kwebhethri okuphansi (othintana naye ngefomu elithi “C”).

Izici ezengeziwe:

• Amabhulokhi wetheminali akhiphekayo anezikulufu zokukhiya
• Ulayini wezintambo ezi-3
• Amandla amakhulu akhanyisiwe anqamule i-circuit breaker ngemanuwali

Rack Ubukhulu (H x W x D):

3.25” x 19.125” x 8.5” 82.6mm x 485.8mm x 215.9mm).

Imiyalelo yokufaka:

Okubalulekile: Lungisa ivolumu yokuphumayotages kanye nokulungiselelwa kwe-Fire Alarm Interface ngaphambi kokufaka iyunithi endaweni yokubeka.

1. Hlukanisa iphansi nangaphezulu kwe-rack mount chassis ngokukhipha izikulufu eziyisithupha (6). (Umdwebo weRack Mechanical and Dimensions, pg. 12).
   ISEXWAYISO: Ungathinti izingxenye zensimbi eziveziwe. Vala amandla esifunda segatsha ngaphambi kokufaka noma ukusevisa imishini. Azikho izingxenye ezisebenzisekayo zomsebenzisi ngaphakathi. Bheka ukufakwa nokusevisa kubasebenzi besevisi abaqeqeshiwe.
2. Setha ivolumu yokuphumayotage: Khetha ivolumu edingekayo ye-DCtage ngokusetha i-SW1 ebhodini lokuhlinzeka ngogesi (Umdwebo 1a, ikhasi 6) esikhundleni esifanele (Okukhiphayo Voltage kanye namashadi okucaciswa okumile, p. 5).
   Ku-Maximal33R: isethi ngayinye yemiphumela eyisishiyagalombili (8) ingasethelwa i-12VDC noma i-24VDC (isib.ample: imiphumela eyisishiyagalombili (8) @ 12VDC kanye nesishiyagalombili (8) imiphumela @ 24VDC).4
3. Izinketho zokuhlela isiqalisi sokufaka:

Iyunithi ingahlelwa ukuthi isebenze nokokufaka okuvamise ukuvuleka noma okuvamise ukuvaleka kusuka kumadivayisi okulawula ukufinyelela ngokusetha amaswishi SW3 ebhodini le-ACM8R-S noma le-ACM16R-S endaweni efanele. (Umdwebo 2b, ikhasi 7); VALIWE ukuze uthole okokufaka kwecupha okuvalekile kwe-[NC] noma VULIWE okokufaka okuvame ukuvuleka okuthi [NO].

4. Izinketho zohlelo lokuphumayo:11
5. Okuphumayo kungahlelwa ukuthi kube yizo zonke i-Fail-Safe (okungukuthi izingidi ze-mag), zonke ze-Fail-Secure (okungukuthi iziteleka zikagesi) nanoma iyiphi inhlanganisela yazo ngayinye ngokusetha amaswishi ediphu e-OUTPUT KHETHA ahambisanayo (1-8) ku-ACM8R-S. ibhodi esikhundleni esifanele; VULIWE kokuphumayo kwe-Fail-Safe noma VALIWE kokuphumayo kwe-Fail-Secure (Umdwebo 2a, 7).

Qaphela: ukulungiselelwa kokuphumayo kuzolandela inketho yokuqalisa okokufaka

1. Ukuze unike amandla Ukunqamula i-FACP ukuze kuphume okukhiphayo iswishi ehambisanayo YE-FIRE ALARM INTERFACE kufanele IVULIWE Ukuze ukhubaze i-FACP Nqamula amaswishi ediphu ye-FIRE ALARM INTERFACE (1-8) ebhodini le-ACM8R-S/ACM16R-S kufanele IVALI. isikhundla (Umdwebo 2a, ikhasi 7).

5. Izinketho zokuhlanganisa i-Fire Alarm Interface:

I-[NC] evamise ukuvaleka, okokufaka okuvamise ukuvula okuthi [NO] noma ukuguqulwa kwe-polarity kusuka kusekethi yokusayina ye-FACP
izocupha okuphumayo okukhethiwe (Amakhiwane 6-11, ikhasi 9). Ukuze uhlele i-Fire Alarm Interface usethe amaswishi ediphu SW1 kanye ne-SW2 ebhodini le-ACM8R-M ezindaweni ezifanele. (Amakhiwane 3a no-3b, ikhasi 7)
(Izilungiselelo Zokushintsha I-Alarm Interface pg. 5).

6. Ukuxhumeka kwebhethri:

Ngezinhlelo zokusebenza zokulawula ukufinyelela amabhethri ayakhethwa. Uma amabhethri engasetshenziswa, ukulahlekelwa yi-AC kuzoholela ekulahlekeni kwevolthi yokuphumayotage. Lapho kusetshenziswa amabhethri, kufanele abe yi-lead acid noma uhlobo lwejeli. Xhuma ibhethri elilodwa (1) kumatheminali amakwe [– BAT + ] ukuze usebenze okungu-12VDC. Sebenzisa amabhethri amabili (2) 12VDC anentambo ochungechungeni ekusebenzeni kwe-24VDC (Umdwebo 4b, 5b, ikhasi 8). Indawo yokubeka irack ngeke iwamukele amabhethri. Kudingeka indawo evalekile yebhethri.

Qaphela: Uma usebenzisa i-Maximal33R nekhophi yasenqolobaneni yebhethri, amabhethri amabili (2) ahlukene noma amasethi amabhethri kufanele asetshenziswe.

7. Imiphumela yebhethri ne-AC Supervision:

Xhuma idivayisi efanelekile yokusayina isaziso kumatheminali abhalwe ukuthi AC Fail kanye neBattery Fail ebhodini lokunikezela kwamandla kagesi (Fig. 4a/5a, ikhasi 8).

Sebenzisa i-22AWG ukuya ku-18AWG ye-AC Fail kanye nokubika kwebhethri ephansi/ayikho.

8. Hlanganisa kabusha phansi nangaphezulu kwe-rack mount chassis ngokuhlanganisa eziyisithupha (6)

(Umdwebo weRack Mechanical and Dimensions pg. 12).

9. Namathisela amabakaki okukhweza endaweni yokubeka i-Maximal ukuze uthole i-rack oyifunayo noma ukufakwa kodonga (Umfanekiso 12-14, 10).
10. Faka endaweni yokubeka oyifunayo Ungavimbeli izintuba zomoya eziseceleni.
11. Setha isinqamuli sesekhethi samandla sokunqamula sibe sendaweni ethi VALIWE (Umdwebo 15a, 12).
12. Xhuma intambo yamandla esakhiweni esisekelwe phansi esingu-115VAC 50/60Hz (Umdwebo 15b, 12).
13. Setha isinqamuli sesekethe samandla sokunqamula sibe ON (Umdwebo 15a, 12).
14. Linganisa umthamo wokukhiphayotage ngaphambi kokuxhuma Lokhu kusiza ukugwema umonakalo ongase ube khona.
15. Setha isinqamuli sesekhethi samandla sokunqamula sibe sendaweni ethi VALIWE (Umdwebo 15a, 12).
16. Izixhumanisi ze-trigger yokokufaka:

Xhuma okokufaka Okujwayelekile Okuvuliwe noma Okuvamise Ukuvala kusukela kumadivayisi okulawula ukufinyelela kumatheminali akhiphekayo amakwe ngokuthi [IN1 kanye ne-GND] nge-[IN8 ne-GND] ye-Maximal1RH ne-Maximal3RH. Ku-Maximal1R, Maximal3R kanye ne-Maximal33R xhuma amadivayisi kusethi yesibili yamatheminali.

Qiniseka ukuthi amadivayisi afana nezilungiselelo ze-SW3 esinyathelweni sesi-3 (Umdwebo weRack Mechanical and Dimensions pg. 12).

17. Ukuxhumana kokuphumayo:

Xhuma imishini ezonikwa amandla kumatheminali akhiphekayo amakwe okuthi [– OUT1 +] kuya ku-[– OUT8 +] ku-Maximal1RH kanye ne-Maximal3RH. Ku-Maximal1R, Maximal3R, kanye ne-Maximal33R xhuma amadivayisi kusethi yesibili yamatheminali aphawulwe ngokuthi [– OUT1 +] ku-[– OUT8 +] (Umdwebo 15c, ikhasi 12).

18. Izinketho zokuxhuma i-Fire Alarm Interface:
    2. Xhuma i-FACP trigger input kumatheminali akhiphekayo amakwe ngokuthi FACP1 kanye ne-FACP2. Uma usebenzisa ukuhlehla kwe-polarity kusuka kusekethi yokusayina ye-FACP, xhuma inegethivu [–] kutheminali ephawulwe ngokuthi FACP1 kanye nephozithivu [+] kutheminali ephawulwe ngokuthi FACP2 (i-polarity isesimweni se-alamu)

(Umdwebo weRack Mechanical and Dimensions pg. 12).

1. Ukuze uthole isixhumi esibonakalayo se-alamu yomlilo exhunywayo xhuma iswishi yokusetha kabusha evamile ethi [NO] kumatheminali akhiphekayo aphawulwe ngokuthi [REST] kanye ne-[GND] ( Amakhiwa. 6-11, 9 ).

19. Setha isinqamuli sesekethe samandla sokunqamula sibe ON (Umdwebo 15a, 12).

Ukunakekela:

Iyunithi kufanele ihlolwe okungenani kanye ngonyaka ukuze isebenze ngendlela efanele ngale ndlela elandelayo:

Okukhipha Umqtage Ukuhlolwa: Ngaphansi kwezimo ezijwayelekile zokulayisha ivolumu ye-DCtage kufanele ihlolwe ivolumu efaneletagIzinga e (Okukhiphayo Voltage kanye namashadi okucaciswa okumile, p. 5).

Ukuhlolwa Kwebhethri: Ngaphansi kwezimo ezijwayelekile zokulayisha hlola ukuthi ibhethri ishajwe ngokugcwele, hlola ivolumu ecacisiwetage kumatheminali ebhethri nasematheminali ebhodi aphawulwe ngokuthi [– BAT +] ukuze kuqinisekiswe ukuthi akukho ukunqamuka kwezintambo zokuxhuma ibhethri.

Izilungiselelo Zokushintsha I-Alarm Interface:

Shintsha Isikhundla		Okokufaka kwe-FACP
SW1	SW2
VALIWE	Valiwe	Isekhethi Yesiginali ye-FACP (Ukuguqulwa kwe-Polarity).
ON	ON	Okuvamise Ukuvalwa Kokufaka Kwe-trigger ye-[NC].
ON	VALIWE	Ngokuvamile Vula [CHA] Okokufaka Kokucupha.

Okukhipha Umqtage kanye Namashadi Okucaciswayo Okumile:

Imodeli ye-Altronix	Ibhodi Lokuhlinzeka Ngamandla	Ibhethri	20 Min. kwe-Backup	4 Hr. kwe-Backup	24 Hr. kwe-Backup
I-Maximal1RH Isilinganiso esiphezulu1R	OLS120 (Bheka ku-Fig. 1a, ikhasi 4 ukuze Ushintshe [SW1] indawo nendawo)	12VDC/40AH*	N/A	3.5A	0.5A
		24VDC/40AH*	N/A	2.7A	0.7A
I-Maximal3RH I-Maximal3R I-Maximal33R	Idatha ye-AL600ULXB (Bheka ku-Fig. 1a, ikhasi 4 ukuze Ushintshe [SW1] indawo nendawo)	12VDC/40AH*	N/A	5.5A	5.5A
		24VDC/40AH*	N/A	5.5A	0.7A

Ibhodi Lokuhlinzeka Ngamandla

Ukuxilongwa kwe-LED:

I-LED		Isimo Sokuhlinzeka Ngamandla
Okubomvu (DC)	Okuluhlaza (AC)
ON	ON	Isimo esivamile sokusebenza.
ON	VALIWE	Ukulahleka kwe-AC. Ibhethri elilindile linikeza amandla.
VALIWE	ON	Akukho okukhiphayo kwe-DC. Isekhethi emfushane noma isimo sokugcwala okushisayo.
VALIWE	VALIWE	Akukho okukhiphayo kwe-DC. Ukulahleka kwe-AC. Ibhethri elilahliwe.

Ama-LED okukhiphayo ku-Front Panel

ON	Okukhiphayo kuyacushwa.
Ukucwayiza	I-FACP inqamule.

ISEXWAYISO: Ukunciphisa ingozi yomlilo noma ukushaqeka kukagesi, ungabeki iyunithi emvuleni noma emswakama. Lokhu kufakwa kufanele kwenziwe ngabasebenzi benkonzo abaqeqeshiwe futhi kufanele kuhambisane neKhodi Kagesi Kazwelonke nawo wonke amakhodi endawo.
Ukubaniza kombani okunophawu lwekhanda lomcibisholo phakathi kukanxantathu olinganayo kuhloselwe ukuxwayisa umsebenzisi ngobukhona be-VOL EYINGOZI egqunyiwe.TAGE ngaphakathi kwendawo ebiyelwe yomkhiqizo okungenzeka ibe nobukhulu obanele ukwenza ukushaqeka kukagesi.
Isibabazo esingaphakathi kukanxantathu olinganayo sihloselwe ukwazisa umsebenzisi ngokubakhona kweziyalezo ezibalulekile zokusebenza nokunakekela (ukunikeza isevisi) ezincwadini ezihambisana nomshini.

ISEXWAYISO: Ukuze unciphise ingozi yokushaqeka ngogesi ungayivuli indawo ebiyelwe. Azikho izingxenye ezisebenzisekayo zomsebenzisi ngaphakathi.

Bheka isevisi kubasebenzi benkonzo abaqeqeshiwe.
Ukuphuma Kwebhodi Lokuhlinzeka Ngamandla VoltagIzilungiselelo

I-Fire Alarm Interface, Ukukhethwa Kokuphumayo, Nohlobo Lokufaka:

Ibhodi Lokuhlinzeka Ngamandla

I-Maximal1RH, i-Maximal1R

Ibhodi Lokuhlinzeka Ngamandla I-Maximal3RH, i-Maximal3R, i-Maximal33R Umdwebo 5

Imidwebo ye-FACP Hook-Up

Okokufaka kokuhlehliswa kwe-polarity okuvela ku-FACP Signal Circuit Outpuit (I-Polarity ibalulwe esimweni se-alamu)

Okokufaka Okuvamise Ukuvala okuvela ku-FACP

Ngokuvamile Vula okokufaka okuvela ku-FACP

Izinketho zokukhweza

Ukufakwa kwe-Wall Mount

1. Beka ngokucophelela i-faceplate phezu kwama-LED, futhi uvikeleke usebenzisa izikulufu ezintathu (3) zekhanda lepani (C) ngaphezulu nezikulufu ezintathu (3) zekhanda lepani (C) ngaphansi kwe-faceplate (Umdwebo 14a).
2. Beka abakaki abakhweza (A) ohlangothini lwesobunxele nolwesokudla lwendawo ebiyelwe yirack (Umdwebo 14b).
   Sebenzisa izikulufu ezintathu (3) zekhanda eliyisicaba (B) ukuze uvikele abakaki abakhwezwayo.
3. Faka irack futhi uvikeleke ngezikulufo ezifakwayo (akufakiwe) (Fig. 14c). Umdwebo 14
   
   

I-Rack Mechanical Umdwebo nobukhulu

3.25” x 19.125” x 8.5” (82.6mm x 485.8mm x 215.9mm)

 

 

 

Funda okwengeziwe ngale Manuwali & Landa i-PDF:

Amadokhumenti / Izinsiza

I-Altronix Maximal R Series Rack Mount Power Controllers (ihlanganisiwe) [pdf] Imaniwali yosebenzisayo I-Maximal R Series Rack Mount Access Power Controllers ihlanganisiwe, i-Maximal R Series, i-Rack Mount Access Power Controllers ihlanganisiwe, Izilawuli zamandla okufinyelela zihlanganisiwe, Izilawuli zamandla zihlanganisiwe

Izithenjwa

• Imaniwali yosebenzisayo