I-Altronix Maximal FD Series Umhlahlandlela Wokufaka Wamandla Akabili Wamandla Okufinyelela Izilawuli Zamandla

I-Maximal11FD
– Ukuhlinzekwa kwamandla 1: 12VDC @ 3.3A noma 24VDC @ 3.6A.
– Ukuhlinzekwa kwamandla 2: 12VDC @ 3.3A noma 24VDC @ 3.6A.
– Ishumi nesithupha (16) le-PTC elivikelwe amandla akhawulelwe imiphumela.
I-Maximal33FD
– Ukuhlinzekwa kwamandla 1: 12VDC @ 5.3A noma 24VDC @ 5.6A.
– Ukuhlinzekwa kwamandla 2: 12VDC @ 5.3A noma 24VDC @ 5.6A.
– Ishumi nesithupha (16) le-PTC elivikelwe amandla akhawulelwe imiphumela.
I-Maximal55FD
– Ukuhlinzekwa kwamandla 1: 12VDC @ 9.3A.
– Ukuhlinzekwa kwamandla 2: 12VDC @ 9.3A.
– Ishumi nesithupha (16) le-PTC elivikelwe amandla akhawulelwe imiphumela.
I-Maximal75FD
– Ukuhlinzekwa kwamandla 1: 12VDC @ 9.3A.
– Ukuhlinzekwa kwamandla 2: 24VDC @ 9.6A.
– Ishumi nesithupha (16) le-PTC elivikelwe amandla akhawulelwe imiphumela.
I-Maximal77FD
– Ukuhlinzekwa kwamandla 1: 24VDC @ 9.6A.
– Ukuhlinzekwa kwamandla 2: 24VDC @ 9.6A.
– Ishumi nesithupha (16) le-PTC elivikelwe amandla akhawulelwe imiphumela.

Umhlahlandlela wokufaka
Umfundisi we-MDFD052419
Ifaka Inkampani: _______________ Ummeli Wenkonzo Igama: ____________________
Ikheli: ___________________________________ Inombolo yocingo: ____________________

I-MaximalFD Series Iphelileview:

I-MaximalFD Access Power/Controllers isabalalisa futhi ishintshe amandla ukuze ifinyelele izinhlelo zokulawula nezinsiza. Baguqula okokufaka kwe-120VAC 60Hz kube okokufaka okuyishumi nesithupha (16) okulawulwa ngokuzimela okungu-12VDC noma okungu-24VDC okuvikelwe kwe-PTC.
Okukhiphayo kwenziwa kusebenze usinki wokuqoqa ovulekile noma okokufaka okuvamise ukuvuleka (NO) kwe-trigger okomile okusuka ku-Access Control System, i-Card Reader, ikhiphedi, i-Push Button, i-PIR, njll. Amayunithi azohambisa amandla kumadivayisi ehadiwe okulawula ukufinyelela okuhlukahlukene okuhlanganisa Ama-Mag Locks. , Iziteleka zikagesi, Izibambi Zezicabha Zezibuthe, njll. Okukhiphayo kuzosebenza kuzo zombili izindlela Zokuhluleka-Ukuphepha kanye/noma Ukuhluleka Kokuvikela. Isixhumi esibonakalayo se-FACP sinika amandla i-Emergency Egress, kanye ne-Alarm Monitoring, noma ingase isetshenziselwe ukucupha ezinye izisetshenziswa ezisizayo. Isici sokunqamula i-alamu yomlilo singakhethwa ngasodwa kunoma yikuphi ukuphuma noma konke okuyisishiyagalombili (8).

Ishadi lokucushwa lochungechunge lwe-MaximalFD:

Uhlu lwabasebenzeli:

Uhlu lwe-UL lwe
Ukufakwa kwase-US: UL 294* – UL Kusohlwini lwamayunithi Esistimu Yokulawula Ukufinyelela.
*ANSI/UL 294 7th Ed. Amazinga Okusebenza Okulawula Ukufinyelela:
Ukuhlasela Okubhubhisayo - I; Ukubekezela - I; Ukuphepha Komugqa - I; Amandla Okulinda - II, III, IV.

Uhlu lwe-UL lwe
Ukufakwa kwe-Canadian: ULC-S319-05 - I-Electronic Access Control Systems Imishini yeClass I.
I-CSA C22.2 No.205 - Izisetshenziswa Zesiginali.
I-ULC-S319-05 Electronic Access Control Systems ngeke isebenze ngokusetshenziswa kwanoma yisiphi isengezo, ukunwetshwa, inkumbulo, noma enye imojuli ekhiqizwe umkhiqizi noma abanye abakhiqizi.

Izici zochungechunge lwe-MaximalFD:

Amamojula okulawula amandla okufinyelela kwe-ACM8CB:

Abayishumi nesithupha (16) bacupha ngokuzimela okuphumayo okulawulwayo. Izinketho zokuphumayo:
a) Ishumi nesithupha (16) Okukhipha amandla ahlungiwe kwe-Fail-Safe.
b) Ishumi nesithupha (16) Okukhipha amandla ahlungiwe kwe-Fail-Secure.
c) Noma iyiphi inhlanganisela yalokhu okungenhla.

Ishumi nesithupha (16) Uhlelo Lokulawula Ukufinyelela lucupha okokufaka. Izinketho zokucupha okokufaka:
a) Ishumi nesithupha (16) elivamise ukuvula (NO) okokufaka kwe-dry trigger.
b) Izinto eziyishumi nesithupha (16) zokuqoqa ezivulekile.
c) Noma iyiphi inhlanganisela yalokhu okungenhla.
Ishumi nesithupha (16) elihlungiwe i-aux engashintshiwe. ukuphuma kwamandla (okuphumayo kukalwe @ 2.5A).

Ama-LED abomvu ebhodini le-ACM8CB akhombisa ukuphuma ngakunye kuyacushwa (ukudluliselwa kunikwe amandla).
Ukunqanyulwa kwe-Alamu Yomlilo (ukuxhuma noma ukungaxhunywanga) kungakhethwa ngakunye kunoma iyiphi noma yonke imiphumela eyishumi nesithupha (16).
Izinketho zokufaka i-Fire Alarm:
a) Ivamise ukuvula (NO) noma kuvame ukuvaleka (NC) dry trigger input.
b) Okokufaka kokuhlehlisa i-polarity kusuka kusekethi yokusayina ye-FACP.

I-LED eluhlaza kubhodi ye-ACM8CB ikhombisa ukuthi ukunqanyulwa kwe-FACP kubaliwe.
Ukudluliselwa okukhiphayo kwe-FACP kubonisa ukuthi okokufaka kwe-FACP kuyacushwa (ifomu elithi “C” lokuxhumana likalwe @ 1A/28VDC alihlolwanga yi-UL).

I-eFlow Power Supply/Charger inikeza amandla afanayo ebhodi le-ACM8CB (izintambo zasefekthri) nawo wonke amadivayisi okulawula ukufinyelela axhunyiwe (izintambo zasensimini).
Amafuse amakhulu ebhodi le-ACM8CB akalwe ku-10A. Ama-PTC okukhiphayo akalwe ku-2.5A.

I-eFlow Power Supply/Ishaja:

Okokufaka: 120VAC, 60Hz.
Okokukhipha voltage futhi unikeze ireferensi yamanje ochungechungeni lwe-MaximalFD Ishadi Lokucupha, pg. 3.
I-Axiliary Class 2 Power-Limited output ilinganiselwe @ 1A (ayishintshiwe).
I-Overvoltagukuvikelwa.
Ishaja eyakhelwe ngaphakathi ye-asidi eholayo evaliwe noma amabhethri ohlobo lwejeli.
Inani eliphakeme kakhulu lama-1.54A.
Shintsha ngokuzenzakalelayo uye kubhethri elilindile lapho i-AC ihluleka. Ukudlulisela emandleni ebhethri alindile kuvele kube khona lapho ngaphandle kokuphazamiseka.

I-alamu yomlilo egadiwe inqamula (i-latching noma ukungaxhumi) 10K EOL resistor. Isebenza ngesicupha esivamise ukuvula (NO) noma kuvalwe ngokujwayelekile (NC).
I-AC yehluleka ukugada (ifomu elithi “C” oxhumana nabo).
Ibhethri liyahluleka nokugadwa ubukhona (ifomu elithi “C” abathintwayo).
Ukuvala amandla aphansi. Ivala amatheminali okukhiphayo e-DC uma ibhethri linomthamotage yehla ngaphansi kuka-71-73% kumayunithi angu-12V kanye no-70-75% kumayunithi angu-24V (kuye ngokuthi ukunikezwa kwamandla). Ivimbela ukuphuma kwebhethri okujulile.

Ukuze uthole i-fuse, izilinganiso zibhekisela ochungechungeni lwe-MaximalFD Ishadi Lokucupha, pg. 3.
I-Green AC Power LED ikhombisa i-120VAC ekhona.
Okokufaka kwe-AC kanye nezinkomba ze-LED ze-DC.
Isekhethi emfishane nokuvikela ukulayisha ngokweqile.
Indawo ebiyelwe ithatha amabhethri afika kwamane (4) 12VDC/12AH.
Ubukhulu bendawo (H x W x D): 26” x 19” x 6.25” (660.4mm x 482.6mm x 158.8mm).

Imiyalelo yokufaka enkulu yeFD:

Izindlela zokufaka izintambo zizohambisana Nekhodi Kagesi Kazwelonke/NFPA 70/ANSI, Ikhodi Kagesi yase-Canadian, Ingxenye I, Ingxenye II, kanye nawo wonke amakhodi endawo neziphathimandla ezinegunya. Umkhiqizo uhloselwe ukusetshenziswa endlini kuphela.

Ukuxilongwa kwe-LED ye-Power Supply Board	(ikhasi 7)
Finyelela ekuhloleni kwe-LED yesilawuli samandla	(ikhasi 7)
Izicaciso zebhethri zebhodi lokuhlinzeka ngogesi	(ikhasi 7)
Umazisi wetheminali Yebhodi Lokuphakela Amandla	(ikhasi 8)
Finyelela Ekuhlonzeni Kwetheminali yesilawuli samandla	(ikhasi 8)
Ukuphuma Kwebhodi Lokuhlinzeka Ngamandla VoltagIzilungiselelo	(ikhasi 9)
Finyelela Isilawuli Samandla Esijwayelekile Somdwebo Wohlelo	(ikhasi 9)
Imidwebo ye-FACP/Ongakukhetha Yokunikezela Amandla	(ikhasi 12)

Faka iyunithi endaweni oyifunayo. Maka futhi ubhoboze izimbobo odongeni ukuze uhambisane nezimbobo zokhiye ezintathu eziphezulu endaweni ebiyelwe. Faka izixhumi ezintathu eziphezulu nezikulufi odongeni amakhanda e-screw aphumele ngaphandle. Beka izimbobo zokhiye ezingaphezulu kwendawo ebiyelwe phezu kwezikulufu ezintathu ezingaphezulu, ileveli, futhi uvikelekile. Maka indawo yezimbobo ezintathu ezingezansi. Susa indawo ebiyelwe. Geza izimbobo ezingezansi bese ufaka izibophelelo ezintathu. Beka izimbobo zokhiye ezingenhla zesivikelo phezu kwezikulufu ezintathu ezingaphezulu. Faka izikulufu ezintathu ezingezansi futhi uqiniseke ukuthi uqinisa zonke izikulufu (I-Enclosure Dimensions, pg. 15).

Xhuma amandla e-AC angashintshiwe (120VAC 60Hz) kumatheminali amakwe okuthi [L, N] (Fig. 3, pg. 10). I-LED “AC” eluhlaza ebhodini lokuphakela amandla izovuleka. Lokhu kukhanya kungabonakala ngelensi ye-LED emnyango wendawo ebiyelwe. Sebenzisa i-14 AWG noma enkulu kukho konke ukuxhumana kwamandla. Intambo eluhlaza okotshani evikelekile iholela emhlabathini.
Gcina izintambo ezikhawulelwe amandla zihlukene nezintambo ezingezona amandla akhawulelwe. Kufanele kunikezwe isikhala esincane esingu-0.25” (Umdwebo 3, ikhasi 10).
ISEXWAYISO: Ungathinti izingxenye zensimbi eziveziwe. Vala amandla esifunda segatsha ngaphambi kokufaka noma ukusevisa imishini. Azikho izingxenye ezisebenzisekayo ngaphakathi.
Bheka ukufakwa nokusevisa kubasebenzi besevisi abaqeqeshiwe.
Khetha ivolumu oyifunayo ye-DCtage ngokumisa i-SW1 endaweni efanele ebhodini lokunikezela amandla (Maximal11FD kanye ne-Maximal33FD), (Fig. 1, pg. 9). Ukunikezwa kwamandla ka-Maximal55FD kusethwe efekthri ku-12VDC. Ukunikezwa kwamandla kaMaximal77FD kusethwe efekthri ku-24VDC. I-Maximal75FD iqukethe ibhodi elilodwa (1) lokuphakela amandla okuyifekthri esethwe ku-12VDC, kanye nebhodi elilodwa (1) lokuphakela amandla elisethwe efekthri ku-24VDC.

Linganisa umthamo wokukhiphayotage yeyunithi ngaphambi kokuxhuma noma imaphi amadivaysi ukuze kuqinisekiswe ukusebenza okufanele. Ivolumu engafanele noma ephezulutage izolimaza lawa madivayisi.
Izinketho zokuphumayo (Umdwebo 2, ikhasi 9):
Iyunithi izohlinzeka ngokuphuma kwamandla ashintshiwe ayishumi nesithupha (16), okuphumayo okuyishumi nesithupha (16) omile kwefomu “C”, noma iyiphi inhlanganisela yakho kokubili amandla ashintshiwe kanye nefomu elithi “C” eliphumayo.
(a) Okukhiphayo Amandla Okushintshiwe Kwe-Fail-Safe: Ngomsebenzi Wehlulekile-Ukuphepha xhuma okokufaka okuphozithivu (+) kwamadivayisi okulawula ukufinyelela kutheminali ephawulwe
[NC]. Xhuma okokufaka okunegethivu (–) kwemishini yokulawula ukufinyelela kutheminali ephawulwe ngokuthi [COM].
(b) Imiphumela Yamandla Eshintshiwe Ye-Fail-Secure:
Ngomsebenzi Wokuhluleka Kokuvikela xhuma okokufaka okuhle (+) kwemishini yokulawula ukufinyelela kutheminali ebhalwe ukuthi [CHA]. Xhuma okokufaka okunegethivu (–) kwemishini yokulawula ukufinyelela kutheminali ephawulwe ngokuthi [COM].

I-ACM8CB Auxiliary Power output (ayishintshiwe):
Xhuma amadivaysi okulawula ukufinyelela adinga amandla angaguquki kumatheminali amakwe okuthi [C] phozithivu (+) kanye [COM] negethivu (–).
Imiphumela yokusiza ye-eFlow (ayishintshiwe):
Ngosizo loxhumo lwedivayisi, lokhu okukhiphayo ngeke kuthinteke Ukunqamula Amandla Aphansi noma Isixhumi Esibonakalayo Somlilo. Xhuma idivayisi kumatheminali amakwe [+ AUX –] (Fig. 3, pg. 10).
Izinketho zokucupha okokufaka (Umdwebo 2, ikhasi 9):
(a) Ngokuvamile Vula inhlamvu yokokufaka engu-[NO]:
Okokufaka 1-8 kwenziwa kusebenze okokufaka okuvamise ukuvuleka noma okuvuliwe komqoqi wokuqoqa. Xhuma ukuphuma kwephaneli yokulawula ukufinyelela, amakhiphedi, izinkinobho zokucindezela, ama-REX PIR, njll. kumatheminali amakwe okuthi [IN] kanye nokuthi [GND].
(b) Vula okokufaka Kosinki Wokuqoqa:
Xhuma iphaneli yokulawula ukufinyelela evulekile yokuqoqa usinki ephozithivu (+) kumatheminali aphawulwe ngokuthi [IN] kanye negethivu (–) kumatheminali abhalwe [GND].

Izinketho ze-ACM8CB Fire Alarm Interface (Amakhiwane 5-9, ikhasi 12):
I-[NC] evamise ukuvaleka noma i-trigger evamise ukuvula okuthi [NO] kusuka kuphaneli yokulawula i-alamu yomlilo noma okokufaka okubuyisela emuva i-polarity kusuka kumjikelezo wokusayinda we-FACP kuzothinta ukuphuma okukhethiwe. Ukuze unike amandla i-FACP Nqamula kokuphumayo vala i(izi)swishi ezihambisanayo [SW1-SW8] ebhodini ngalinye le-ACM8CB. Ukuze ukhubaze ukunqanyulwa kwe-FACP kokuphumayo vula amaswishi ahambisanayo [SW1-SW8] ebhodini ngalinye le-ACM8CB.
(a) Ngokuvamile Vula okuthi [NO] okokufaka:
Ukuze uthole ama-hook-ups angaxhunywanga bheka ku-Fig. 6, pg. 12. Ukuze uthole i-latching hook-up bhekisela ku-Fig. 7, p. 12.
(b) Okokufaka okuvamise ukuvalwa [NC]:
Ukuze uthole ama-hook-ups angaxhunywanga bheka ku-Fig. 8, pg. 12. Ukuze uthole i-latching hook-up bhekisela ku-Fig. 9, p. 12.
(c) I-FACP Signaling Circuit input trigger:
Xhuma iphozithivu (+) nenegethivu (–) kusukela okukhiphayo kwesekethe ye-FACP kumatheminali amakwe [+ INP –]. Xhuma i-FACP EOL kumatheminali amakwe [+ RET –] (i-polarity ibhekisela esimweni se-alamu). I-jumper etholakala eduze kwe-TRG LED kumele inqunywe (Fig. 2a, pg. 9 noFig. 6, pg. 12).
I-FACP Dry form "C" okukhiphayo (akukahlolwa yi-UL) (Fig. 2b, pg. 9):
Oxhumana nabo befomu le-FACP elithi “C” bangasetshenziselwa ukucupha ukubika noma ukusayina amadivayisi. Laba abathintwayo bashintshela kumshini wokufaka i-alamu yomlilo kumabhodi e-ACM8CB.

Izixhumanisi Zebhethri Ezilindile (Umfanekiso 3, ikhasi 10):
Kuzinhlelo zokusebenza ze-US Access Control amabhethri ayakhethwa. Amabhethri ayadingeka ekufakweni kwe-Canadian (ULC-S319). Uma amabhethri engasetshenziswa, ukulahlekelwa yi-AC kuzoholela ekulahlekeni kwevolthi yokuphumayotage. Uma kufunwa ukusetshenziswa kwamabhethri alindile, kumele abe yi-lead acid noma uhlobo lwejeli. Xhuma ibhethri kumatheminali amakwe [- BAT +] (Fig. 3, pg. 10). Sebenzisa amabhethri amabili (2) 12VDC axhunywe ochungechungeni lokusebenza kwe-24VDC (amabhethri afakiwe afakiwe). Sebenzisa amabhethri – Amabhethri e-Castle CL1270 (12V/7AH), CL12120 (12V/12AH), CL12400 (12V/40AH), CL12650 (12V/65AH) amabhethri noma amabhethri aqashelwa yi-UL BAZR2 kanye ne-BAZR8 esilinganiso esifanele.
Ibhethri kanye nemiphumela yokugadwa kwe-AC (Fig. 3, pg. 10):
Kudingeka ukuxhuma idivayisi yokubika inkinga yokugada emiphumeleni ephawulwe ngokuthi [AC Fail, BAT Fail] kanye nokuphumayo kokudluliswa kokugada okumakwe ngokuthi [NC, C, NO] kumadivayisi afanelekile esaziso esibonakalayo. Sebenzisa ama-22 AWG ukuya ku-18 AWG ngokuhluleka kwe-AC kanye nokubika kwebhethri eliphansi/alikho.
Ukuze ubambezele ukubika kwe-AC amahora ama-2., setha iswishi ye-DIP [Ukubambezeleka kwe-AC] endaweni YOKUVALIWE (Umfanekiso 3, ikhasi 10).
Ukuze ubambezele ukubika kwe-AC iminithi elingu-1, setha iswishi ye-DIP [Ukubambezeleka kwe-AC] ibe ON (Umfanekiso 3, ikhasi 10).
Ukuvala Amandla Aphansi (Fig. 3, pg. 10):
Ukuze unike amandla Ukuvala Amandla Okukhipha Okuphansi, setha iswishi ye-DIP [Ukuvala shaqa] endaweni VULIWE.
Ukuze ukhubaze Ukuvala Amandla Okukhipha Okuphansi, setha iswishi ye-DIP [Ukuvala Shaqa] endaweni YOKUVALA.
Ukufakwa kwe-Tamper Shintsha (Umdwebo 3a, ikhasi 10):
I-Mount UL Ifakwe ohlwini lwe-tamper switch (imodeli ye-Altronix TS112 noma efanayo) phezulu kwendawo ebiyelwe. Shelelezisa i-tamper shintsha ubakaki onqenqemeni lwendawo ebiyelwe cishe u-2” ukusuka kwesokudla (Fig. 3a, pg. 10). Xhuma i-tampshintsha izintambo kokokufaka kwe-Access Control Panel noma idivayisi efanele yokubika esohlwini lwe-UL. Ukwenza isignali ye-alamu isebenze, vula umnyango wendawo ebiyelwe.
Okokufaka kwamandla amaningi (Umfanekiso 2, ikhasi 9) (Akukahlolwa i-UL):
Uma usebenzisa ukunikezwa kwamandla kwangaphandle okungeziwe okusohlwini, ama-jumpers J1 kanye ne-J2 atholakala ebhodini le-ACM8CB elihambisanayo kufanele anqunywe (Fig. 2c, pg. 9 noFig. 5, pg. 12). Xhuma isilawuli sangaphandle esinomkhawulo wokufinyelela esilawulweni samandla kumatheminali abhalwe [- Control +] (Lawa matheminali ahambisana namatheminali [– Amandla +]). Uma usebenzisa izinsiza zamandla e-DC, kufanele kuqashelwe i-polarity. Uma usebenzisa izinsiza zamandla e-AC, i-polarity ayidingi ukubonwa (Fig. 2d, pg. 9). Konke ukuxhunywa kwezintambo zenkambu kufanele kwenziwe kusetshenziswa igeyiji efanelekile ye-CM noma i-FPL enejakhethi yocingo (noma into efanayo) (Fig. 4a, pg. 11).

Ukunakekela:

Iyunithi kufanele ihlolwe okungenani kanye ngonyaka ukuze isebenze ngendlela efanele ngale ndlela elandelayo:

Ukugadwa kwe-FACP:	Ukuqinisekisa ukuxhumeka okufanele nokusebenza kwe-Fire Alarm nqamula i-hookup. Sicela ulandele inqubo efanele ngezansi:
Okokufaka Okujwayelekile:	Ukubeka iDemo phakathi kwamatheminali amakwe ngokuthi [T] kanye nokuthi [+ INP] kuzoqalisa I-alamu yomlilo Nqamula. Susa okufushane ukuze usethe kabusha.
Okokufaka Okuvalekile:	Ukukhipha intambo kutheminali ephawulwe ngokuthi [INP –] kuzocupha i-alamu yomlilo Nqamula. Shintshanisa intambo itheminali ephawulwe ngokuthi [INP –] ukuze isethwe kabusha.
Okokufaka Kwesekethe Yesiginali ye-FACP:	Kuyadingeka ukuqalisa Isistimu Ye-alamu Yomlilo. Kuzo zonke lezi zimo ezingenhla, i-TRG LED eluhlaza ye-ACM8CBs izokhanyisa. Konke okukhiphayo okukhethelwe Ukunqamula I-alamu yomlilo kuzovula ukukhiya amadivaysi.

Qaphela: Yonke imiphumela [OUT 1] – [OUT 8] kumele ibe sesimweni esijwayelekile (sokungabi namandla) ngaphambi kokuhlolwa. Uma iyunithi ilungiselwe Ukuvula Okujwayelekile (Fig. 8, pg. 12) noma Okuvamise Ukuvala (Fig. 10, pg. 12) ukusebenza kokuxhuma, kuyadingeka ukusetha kabusha Ukunqamula I-Alamu Yomlilo ngokuvula iswishi yokusetha kabusha Okuvamise Ukuvaleka.

Okukhipha Umqtage Test:	Ngaphansi kwezimo ezijwayelekile zokulayisha, ivolumu yokuphuma kwe-DCtage kufanele ihlolwe ivolumu efaneletage level (bheka Ishadi Lokucupha lochungechunge lwe-MaximalFD, pg. 3).
Ukuhlolwa Kwebhethri:	Ngaphansi kwezimo ezijwayelekile zokulayisha hlola ukuthi ibhethri ishajwe ngokugcwele, hlola ivolumu eshiwotage kumatheminali ebhethri nasematheminali ebhodi aphawulwe ngokuthi [+ BAT –] ukuze kuqinisekiswe ukuthi akukho ukunqamuka kwezintambo zokuxhuma ibhethri.

Qaphela: Isilinganiso esiphezulu senkokhelo yamanje ngu-1.54A. Impilo yebhethri elindelwe iminyaka emi-5; kodwa-ke, kunconywa ukushintsha amabhethri phakathi neminyaka emi-4 noma ngaphansi uma kunesidingo.
Ukuxilongwa kwe-LED ye-Power Supply Board:

Okubomvu (DC)	Okuluhlaza (AC/AC1)	Isimo Sokuhlinzeka Ngamandla
ON	ON	Isimo esivamile sokusebenza.
ON	VALIWE	Ukulahleka kwe-AC. Ibhethri elilindile linikeza amandla.
VALIWE	ON	Akukho okukhiphayo kwe-DC.
VALIWE	VALIWE	Ukulahleka kwe-AC. Ibhethri elivuliwe noma alikho. Akukho okukhiphayo kwe-DC.

Okubomvu (Ilulwane)	Isimo Sebhethri
ON	Isimo esivamile sokusebenza.
VALIWE	Ibhethri liyahluleka/ibhethri liphansi.

Ukuhlola i-LED yesilawuli samandla:

I-LED	ON	VALIWE
I-LED 1- LED 8 (Bomvu)	Ukudluliselwa komphumela kunikwe amandla.	Ukudluliselwa komphumela kukhishwe amandla.
I-Trg (Green)	Okokufaka kwe-FACP kucushiwe (isimo se-alamu).	I-FACP evamile (isimo esingesona i-alamu).

Imininingwane Yebhethri Yebhodi Lokuhlinzeka Ngamandla:

Ibhethri	I-Maximal11FD	I-Maximal33FD	I-Maximal55FD, i-Maximal75FD, ne-Maximal77FD
7AH	30 min./4A*	10 Amaminithi./6A	5 Amaminithi./10A
12AH	35 min./4A*	30 min./6A*	30 min./10A*
40AH	Ngaphezu kwamahora angu-4/4A*	Ngaphezu kwamahora angu-4/6A*	Ngaphezu kwamahora angu-2/10A*
65AH	Ngaphezu kwamahora angu-4/4A*	Ngaphezu kwamahora angu-4/6A*	Ngaphezu kwamahora angu-4/10A*

*Yilokhu kulungiselelwa kuphela okungasetshenziswa ekufakweni kwe-ULC-S319.

Umazisi wetheminali Yebhodi Lokuhlinzeka Ngamandla:

Isendlalelo seTheminali	Umsebenzi/Incazelo
L, G, N	Xhuma i-120VAC 60Hz kulawa matheminali: L ukuya kokushisayo, N kokumaphakathi. Ungayisebenzisi itheminali ephawulwe ngokuthi [G].
+ DC -	Imboni exhunywe ebhodini le-ACM8.
Qalisa i-EOL Igadwe	I-Fire Alarm Interface icupha okokufaka okuvela kufushane noma i-FACP. Okokufaka kwe-trigger ngokuvamile kuvame ukuvuleka, kuvame ukuvalwa kusukela kumjikelezo ophumayo we-FACP (Okokufaka okukhawulelwe kwamandla we-Class 2) (Fig. 3, pg. 10).
CHA, I-GND SETHA KABUSHA	I-FACP interface yokuxhuma noma ukungaxhumani (i-Class 2 power-limited) (Fig. 3, pg. 10).
+ AUX -	I-Axiliary Class 2 okukhiphayo okukhawulelwe kwamandla okulinganiselwe @ 1A (akushintshiwe) (Fig. 3, pg. 10).
I-AC FAIL NC, C, NO	Ibonisa ukulahleka kwamandla e-AC, isb. xhuma kudivayisi ezwakalayo noma iphaneli ye-alamu. I-relay ngokuvamile inikwa amandla uma amandla e-AC ekhona. Isilinganiso sothintana naye 1A @ 30VDC (Class 2 power-limited) (Fig. 3, pg. 10).
BAT FAIL NC, C, NO	Ibonisa isimo sebhethri eliphansi, isb. xhuma kuphaneli ye-alamu. I-relay ngokuvamile inikwa amandla lapho amandla e-DC ekhona. Isilinganiso sothintana naye 1A @ 30VDC. Ibhethri elikhishiwe libikwa emizuzwini emi-5. Ukuxhunywa kabusha kwebhethri kubikwe phakathi neminithi elingu-1 (Ikilasi 2 lilinganiselwe amandla) (Umfanekiso wesi-3, p. 10).
+ BAT -	Ukuxhumana kwebhethri okulindile. Inkokhelo enkulu yamanje ngu-1.54A (okungewona amandla-akhawulelwe) (Fig. 3, pg. 10).

Ubunikazi betheminali yesilawuli samandla:

Isendlalelo seTheminali	Umsebenzi/Incazelo
- Amandla +	I-12VDC noma i-24VDC evela ekunikezeni amandla/ishaja (ifekthri ixhunyiwe). Lawa matheminali ahambisana namatheminali [- Control +].
– Control +	Lawa matheminali ahambisana namatheminali [- Amandla +]. Lawa matheminali angaxhunywa kusilawuli samandla sokufinyelela esikhawulelwe sangaphandle esisohlwini lwangaphandle ukuze kuhlinzekwe ngamandla okusebenza awodwa wamadivayisi (Akukahlolwa i-UL). Ama-Jumpers J1 kanye ne-J2 kufanele asuswe.
I-TRIGGER INPUT 1- INPUT 8 IN, GND	Kusukela kokuvamile okuvulayo kanye/noma okuvulayo okucuphayo okuqoqile okucuphayo (isicelo sokuphuma kwezinkinobho, ukuphuma kokuhamba ngakubili, njll.)
OKUPHUMILEYO 1- OKUPHUMILEYO 8 NC, C, NO, COM	I-12VDC ukuya ku-24VDC icupha ukuphuma okulawulwayo. Umthamo omkhulu wokulayisha ngakunye okukhiphayo ngu-2.5A.
	Maximal11FD: P/S 1 – 9.8-13.2VDC @ 3.3AP/S 2 – 9.8-13.2VDC @ 3.3A noma P/S 1 – 19.9-26.4VDC @ 3.6AP/S 2 – 19.9-26.4VDC noma @ 3.6VDC P/S 1 – 9.8-13.2VDC @ 3.3A kanye ne-P/S 2 – 19.9-26.4VDC @ 3.6A.
	Maximal33FD: P/S 1 – 9.7-13.2VDC @ 5.3AP/S 2 – 9.7-13.2VDC @ 5.3A noma P/S 1 – 19.8-26.4VDC @ 5.6AP/S 2 – 19.8-26.4VDC noma @ 5.6VDC P/S 1 – 9.7-13.2VDC @ 5.3A kanye ne-P/S 2 – 19.8-26.4VDC @ 5.6A.
	I-Maximal55FD: P/S 1 – 9.7-13.2VDC @ 9.3A kanye ne-P/S 2 – 9.7-13.2VDC @ 9.3A.
	I-Maximal75FD: P/S 1 – 9.7-13.2VDC @ 9.3A kanye ne-P/S 2 – 19.8-26.4VDC @ 9.6A.
	I-Maximal77FD: P/S 1 – 19.8-26.4VDC @ 9.6A kanye ne-P/S 2 – 19.8-26.4VDC @ 9.6A.
	I-Fail-Safe [i-NC iphozithivu (+) & I-COM Negative (–)], I-Fail-Vikela [AKUKHO okuhle (+) & I-COM Negative (–)], okukhiphayo okusizayo [C positive (+) & COM Negative (–)]. Uma usebenzisa i-AC power supply polarity ayidingi ukubonwa. Oxhumana nabo baboniswa esimweni esingacushiwe.
I-FACP INTERFACE T, + INPUT	I-Fire Alarm Interface icupha okokufaka okuvela ku-FACP. Okokufaka kwe-trigger ngokuvamile kuvame ukuvuleka, kuvame ukuvalwa kusukela ekuphumeni kwesekethe ye-FACP (Figs. 5-9, pg. 12).
I-FACP INTERFACE NC, C, NO	Othintana naye wefomu “C” odluliselwe ukalwe @ 1A 28VDC ngokubika nge-alamu (akukahlolwa yi-UL).

Ukuphuma Kwebhodi Lokuhlinzeka Ngamandla Voltage Izilungiselelo:

Finyelela Isilawuli Samandla Esijwayelekile somdwebo wohlelo lokusebenza (ku-ACM8CB ngayinye):

ISEXWAYISO: Uma ibhodi yokuphakela amandla isethelwe i-12VDC sebenzisa ibhethri elilodwa kuphela (1) 12VDC elimele.
Gcina izintambo ezikhawulelwe amandla zihlukene kokungewona amandla-akhawulelwe. Sebenzisa isikhala esincane esingu-0.25″.
12AH Amabhethri aphinde ashajwa amabhethri amakhulu kakhulu angangena kule ndawo ebiyelwe. Indawo evalekile yebhethri yangaphandle esohlwini lwe-UL kufanele isetshenziswe uma kusetshenziswa amabhethri angu-40AH noma angu-65AH.

Izidingo ze-NEC Power-Limited Wiring:

Izintambo zesekethe ezinomkhawulo kanye nokungewona amandla-alinganiselwe kumele zihlale zihlukene kukhabhinethi. Zonke izintambo zesekethe ezinomkhawulo wamandla kufanele zihlale okungenani zingu-0.25” kude nanoma yiziphi izintambo ezingezona amandla alinganiselwe. Ngaphezu kwalokho, zonke izintambo zesekethe ezinomkhawulo wamandla kanye nezintambo ezingenawo amandla-ezilinganiselwe zesekethe kufanele zingene futhi ziphume ikhabhinethi ngamapayipi ahlukene.
Omunye onjalo examplokhu kuboniswe ngezansi. Uhlelo lwakho lokusebenza oluthile lungase ludinge ukuthi kusetshenziswe izindlela ezahlukene zokukhonkotha komsele. Kungase kusetshenziswe noma yikuphi ukukhishwa komsele. Kuzinhlelo zokusebenza ezikhawulelwe amandla ukusebenzisa ipayipi kungakhethwa. Konke ukuxhunywa kwezintambo zasenkambu kufanele kwenziwe kusetshenziswa igeji efanelekile yocingo oluyi-CM noma i-FPL enejakhethi (noma enye into efanayo).
Indawo engakhethwa yebhethri Esohlwini lwe-UL kufanele igxunyekwe eduze nendawo yamandla ngokusebenzisa izindlela zezintambo Zekilasi 1. Ukufakwa kwe-Canadian sebenzisa izintambo ezivikelekile kukho konke ukuxhumana.
Qaphela: Bheka umdwebo ongezansi wokubamba izintambo ukuze uthole indlela efanele yokufaka i-CM noma i-FPL enejacket wire (Fig. 4a).

Imidwebo ye-FACP Hook-Up:

Amanothi:…..

I-eFlow Power Supply/Charger ingaba
Kulawulwa futhi Kugadwe ngenkathi Kubikwa
Amandla/Ukuxilongwa kusuka Noma yikuphi
phezu Kwenethiwekhi...

I-LINQ2 – Imojula Yokuxhumana Yenethiwekhi
I-LINQ2 inikeza ukufinyelela kwe-IP okude kudatha yesikhathi sangempela evela ku-eFlow amandla/amashaja ukusiza ukugcina amasistimu esebenza futhi kumazinga afanele. Isiza ukufakwa nokusetha okusheshayo nokulula, inciphise isikhathi sokuphumula sesistimu, futhi isuse amakholi esevisi angadingekile, esiza ukwehlisa Ingqikithi Yezindleko Zobunikazi (TCO) - futhi idale umthombo omusha Wemali Engenayo Ephindaphindwayo Yanyanga zonke (RMR).

Izici:
- I-UL isohlwini lwase-US naseCanada.
– Ukulawulwa kwasendaweni noma okukude okufika koku (2) kokuphuma kwamandla okubili kwe-Altronix eFlow nge-LAN kanye/noma i-WAN.
- Gada ukuxilonga ngesikhathi sangempela: DC okukhipha voltage, okukhiphayo okwamanje, isimo/isevisi ye-AC & nebhethri, ukushintsha kwesimo se-trigger yokufaka, ukushintsha kwesimo sokuphumayo, nezinga lokushisa leyunithi.
- Ukulawulwa kokufinyelela nokuphathwa komsebenzisi: Khawulela ukufunda/ukubhala, Khawulela abasebenzisi kuzinsiza ezithile
- Ukudlulisa okubili (2) kwenethiwekhi ehlanganisiwe elawulwa Ifomu “C”.
- Izibangeli zokufaka ezihlelekayo ezintathu (3): Lawula ama-relay kanye nokunikezwa kwamandla ngemithombo yehadiwe yangaphandle.
- Izaziso ze-imeyili ne-Windows Dashboard
- Irekhodi lomcimbi lilandelela umlando.
- Secure Socket Layer (SSL).
- Ingahleleka nge-USB noma web isiphequluli – sifaka isofthiwe esebenzayo nekhebula le-USB elingu-6 ft.

I-LINQ2 Igibelela Ngaphakathi kwanoma iyiphi I-MaximalF Enclosure

I-Maximal11FD/33FD/55FD/75FD/77FD Series Umhlahlandlela Wokufaka Wamandla Okufinyelela (PTC)
I-Altronix ayinasibopho sanoma yimaphi amaphutha e-typographical.
140 58th Street, Brooklyn, New York 11220 USA | ifoni: 718-567-8181 | ifeksi: 718-567-9056
webindawo: www.altronix.com | i-imeyili: info@altronix.com | Iwaranti yempilo yonke
IIMaximal11FD/33FD/55FD/75FD/77FD Series
H11U

Amadokhumenti / Izinsiza

I-Altronix Maximal FD Series Izilawuli Zamandla Ezikabili Zokutholakala Kwamandla [pdf] Umhlahlandlela wokufaka
I-Maximal FD Series Dual Power Supply Access Controllers, Maximal FD Series, Dual Power Supply Access Controllers, Dual Power Supply, Access Power Controllers Power Supply, Access Power Controllers, Power Supply, Maximal11FD, Maximal33FD, Maximal55FD, Maximal75FD, Maximal77FD

Izithenjwa

Imaniwali yosebenzisayo

I-Maximal FD Series Izilawuli Zamandla Ezikabili Zokutholakala Kwamandla