AC yamanje
I-Oscilloscope Probe
Imodeli ehlobene ye- " SR661
ISILINGANISO SAMANJE IYAHLOLA
Copyright© Chauvin Arnoux ® , Inc. dba AEMC Amathuluzi. Wonke Amalungelo Agodliwe. Ayikho ingxenye yale mibhalo engenziwa kabusha nganoma yiluphi uhlobo noma nganoma iyiphi indlela (okuhlanganisa ukugcinwa kwe-electronic® nokubuyiswa noma ukuhunyushelwa kunoma yiluphi olunye ulimi) ngaphandle kwesivumelwano sangaphambili nemvume ebhaliwe evela ku-Chauvin Arnoux, Inc., njengoba ibuswa yi-United States kanye ne-copyright yamazwe ngamazwe. imithetho. Chauvin Arnoux® , Inc. dba AEMC
Izinsimbi
15 Faraday Drive • Dover, NH 03820 USA Ucingo: 603-749-6434 or 800-343-1391 • Ifeksi: 603-742-2346®
Le mibhalo inikezwa njengoba injalo, ngaphandle kwewaranti yanoma yiluphi uhlobo, ecacile, eshiwoyo, noma ngenye indlela.
Chauvin Arnoux
Inkampani yenze yonke imizamo yokuqinisekisa ukuthi le mibhalo inembile; kodwa akuqinisekisi ukunemba noma ukuphelela kombhalo, imidwebo, noma olunye ulwazi oluqukethwe® kule mibhalo. I-Chauvin Arnoux Inc. ngeke ibe necala lanoma yimuphi umonakalo, okhethekile, ongaqondile,
okwenzekayo, noma okungabalulekile; okuhlanganisa (kodwa kungagcini) ngomonakalo ongokomzimba, ongokomzwelo noma wemali ngenxa yemali engenayo elahlekile noma inzuzo elahlekile engase ibe umphumela wokusetshenziswa kwalezi zincwadi, noma ngabe umsebenzisi wemibhalo uye wazisiwe noma cha mayelana nokuba nokwenzeka kwalowo monakalo.
Isitatimende Sokuhambisana
I-Chauvin Arnoux® , Inc. dba AEMC Instruments iqinisekisa ukuthi leli thuluzi lilinganiselwe kusetshenziswa amazinga namathuluzi alandeleka kumazinga omhlaba.
Siyaqinisekisa ukuthi ngesikhathi sokuthunyelwa insimbi yakho ihlangabezane nezicaciso ezishicilelwe zethuluzi.
Isitifiketi esilandelekayo se-NIST singase sicelwe ngesikhathi sokuthenga, noma sitholwe ngokubuyisela ithuluzi endaweni yethu yokulungisa nokulinganisa, ngenkokhiso encane.
Isikhawu sokulinganisa esinconyiwe saleli thuluzi izinyanga eziyi-12 futhi siqala ngedethi yokutholwa yikhasimende. Ukuze ulungise kabusha, sicela usebenzise izinsizakalo zethu zokulinganisa. Bheka esigabeni sethu sokulungisa nokulinganisa kokuthi www.aemc.com/calibration.
Inombolo ye-serial:………………
Ikhathalogi #: 2113.49
Imodeli #:SR661.
Sicela ugcwalise usuku olufanele njengoba kukhonjisiwe: ……………
Usuku etholwe ngalo: ……………
Idethi Yokulinganisa Okudingeka Ngayo: …………
ISINGENISO
Siyabonga ngokuthenga i-AEMC Instruments AC Current Oscilloscope Probe Model SR661.
Ukuze uthole imiphumela engcono kakhulu evela kuthuluzi lakho kanye nokuphepha kwakho, kufanele ufunde imiyalelo yokusebenza efakiwe ngokucophelela futhi uhambisane nezinyathelo zokuphepha zokusebenzisa. Opharetha abaqeqeshiwe nabaqeqeshiwe kuphela okufanele basebenzise lo mkhiqizo.
1.1 IZIMPAWU ZIKAgesi ZAMAZWE NGAMAZWE
 |
Kubonisa ukuthi ithuluzi livikelwe ngokufakwa okuphindwe kabili noma okuqinisiwe. |
 |
ISEXWAYISO - Ingozi Yengozi! Ikhombisa ISEXWAYISO. Noma nini lapho lolu phawu lukhona, opharetha kufanele abhekisele kumanuwali yomsebenzisi ngaphambi kokusebenza. |
 |
Ikhombisa ingozi yokushaqeka kukagesi. Umqulutage ezingxenyeni ezimakwe ngalolu phawu kungase kube yingozi. |
 |
Isicelo noma ukuhoxiswa okugunyazwe kumakhondaktha aphethe umthamo oyingozitages. Thayipha inzwa yamanje njenge-IEC 61010-2-032. |
 |
Lolu phawu lusho ivolumutage ukukhawulela isifunda. |
 |
Ikhombisa ulwazi olubalulekile okufanele uluvume |
 |
Lo mkhiqizo uhambisana neVol Ephansitage & Electromagnetic Compatibility Iziqondiso zaseYurophu. |
 |
E-European Union, lo mkhiqizo ungaphansi kwesistimu yokuqoqwa ehlukile yokugaya kabusha izingxenye zikagesi neze-elekthronikhi ngokuvumelana nomyalelo we-WEEE 2012/19/EU. |
1.2 INCAZELO YEMIKHAKHA YESILINGANISO
CAT IV: Ihambisana nezilinganiso ezenziwa endaweni yokuqala kagesi (< 1000 V).
ExampI-le: amadivayisi okuvikela okudlulele okuyinhloko, amayunithi okulawula ama-ripple, namamitha.
I-CAT III: Ihambisana nezilinganiso ezenziwe ekufakweni kwesakhiwo ezingeni lokusabalalisa.
ExampI-le: imishini eqinile ekufakweni okungaguquki kanye nama-breaker circuit.
I-CAT II: Ihambisana nezilinganiso ezenziwa kumasekhethi axhunywe ngokuqondile ohlelweni lokusabalalisa ugesi.
Example: izilinganiso zezinto zasendlini namathuluzi aphathekayo.
1.3 IZINDLELA ZOKUQAPHELA
- Izixwayiso zokuphepha zinikezwa ukuze kuqinisekiswe ukuphepha kwabasebenzi kanye nokusebenza kahle kwethuluzi. Funda imiyalelo ngokuphelele.
- Qaphela kunoma iyiphi isekethe: ivolumu enamandla amakhulutagama-e kanye nemisinga kungase kube khona futhi kungase kubangele ingozi yokushaqeka.
- Ungayisebenzisi i-probe uma yonakele. Njalo xhuma i-probe yamanje kudivayisi yokulinganisa ngaphambi kokuthi ixhunywe eduze kwekhondakta.
- Ungasebenzisi ku-conductor engagqunyiwe enamandla okuwisa ngaphezu kuka-600 V CAT III ukungcola 2. Sebenzisa ukuqapha okukhulu uma uqoqaampukuzungeza ama-conductor angenalutho noma amabhasi.
- Ngaphambi kokusetshenziswa ngakunye, hlola i-probe; bheka imifantu endlini noma ikhebula lokuphumayo.
- Ungasebenzisi i-clamp endaweni emanzi noma ezindaweni lapho kukhona amagesi ayingozi.
- Ungasebenzisi i-probe noma kuphi ngale kwesithiyo esithintekayo.
1.4 UKUTHOLA OKUTHUNYELWE KWAKHO
Lapho uthola ukuthunyelwa kwakho, qiniseka ukuthi okuqukethwe kuyahambisana nohlu lokupakisha. Yazisa umsabalalisi wakho nganoma yiziphi izinto ezingekho. Uma impahla ibonakala ilimele, file isimangalo ngokushesha nesithwali futhi wazise umsabalalisi wakho ngesikhathi esisodwa, unikeze incazelo enemininingwane yanoma yimuphi umonakalo. Londoloza isiqukathi sokupakisha esilimele ukuze uqinisekise isimangalo sakho.
1.5 ULWAZI LOKU-ODA
I-AC Yamanje Ye-Oscilloscope Probe Model SR661 ………………………..Ikati. #2113.49 Ifaka imanuwali yomsebenzisi.
1.5.1 Izesekeli kanye Nezingxenye Ezishintshayo
I-adaptha – BNC (Owesifazane) ukuya ku-4 mm Ubhanana (Owesilisa) ………………………..Ikati. #2119.94
IZICI ZOMKHIQIZO
2.1 INCAZELO
I-AC Current Oscilloscope Probe Model SR661 inweba izinhlelo zokusebenza ze-oscilloscope ezindaweni zezimboni noma zamandla, futhi ilungele ukuhlaziya nokukalwa kwamagagasi amanje ahlanekezelwe nama-harmonics.
I-Model SR661 ivumela ukuboniswa okunembile kanye nokukalwa kwamaza kusuka ku-100 mA kuya ku-1000 ARMS, 1 Hz kuya ku-100 kHz (ngokwehla kwamanje) ngaphandle kokugqekeza kusekethe. Isihlungi esingenzi lutho siqeda umsindo, sikhala kumagagasi akhuphuka ngokushesha (di/dt), futhi siqinisekisa ukuboniswa kwesikrini okunembile.
I-probe ixhuma ngqo ku-oscilloscope ngentambo ye-coaxial evalekile ene-BNC evalekile.
2.2 UKUQHUBEKA
I-Model SR661 ihambisana nanoma iyiphi i-analog noma i-oscilloscope yedijithali noma enye ivolumutagIthuluzi lokulinganisa i-e elinezici ezilandelayo:
- Isixhumi sokufaka se-BNC
- Ibanga elikwazi ukubonisa (0.2 kuya ku-0.5) V ngesigaba ngasinye, noma ububanzi obungu-2 V
- I-impedance encane yokufaka engu-1 MΩ
2.3 IZICI
- Ukuvulwa komhlathi okungu-2.25 in
- Ubukhulu bobukhulu bekhondatha ngu-2.13 in (54 mm)
- I-Tactical Barrier. Njalo gcina izandla zingaphansi kwalesi sivimbelo ngaso sonke isikhathi.
- Umcibisholo ubonisa isiqondiso sokugeleza kwamanje. I-current igeleza ibheke ohlangothini oluhle uma isuka kokunikezwayo iye kokulayisha.
- Shintsha isikhundla ezintathu
- 6.5 ft (2 m) ikhebuli yokuphumayo
IMICIMBI
3.1 IMINININGWANE KAgesi
*Izimo zereferensi: 23 °C ± 3 °K, (20 kuya ku-75) % RH, (48 kuya ku-65) Hz, inkambu yangaphandle kazibuthe
<40 A/m, ayikho ingxenye ye-DC, ayikho i-conductor ephethe yangaphandle yamanje, i-test sample igxile.
Ibanga Lokusebenza: (0.1 kuya ku-2000) Inani eliphakeme
Ibanga Lokulinganisa: 100 mA kuya ku-1200 ARMS (2000 A inani eliphakeme)
Isiginali yokuphumayo: isignali yokuphumayo ye-mV (2 V peak max)
| 100 mV/A: | 10 mA kuya ku-20 A isiqongo |
| 10 mV/A: | (0.1 kuya ku-200) Isiqongo |
| 1 mV/A: | (1 kuya ku-2000) Isiqongo |
1 mV/A, (1 V at 1000 A)
| Ibanga | Ukunemba | Isigaba Shift |
| (1-50) A | ≤1 % ± 1 mV | N/A |
| (50-200) A | ≤3° | |
| (200-1000) A | ≤2° | |
| (1000-1200) A | ≤1° |
Ukulayisha ngokweqile: Imizuzu eyi-15 VULIWE, imizuzu engama-30 IVULIWE
10 mV/A, (1 V at 100 A)
| Ibanga | Ukunemba | Isigaba Shift |
| (0.1-5) A | ≤2 % ± 5 mV | N/A |
| (5-20) A | ≤15° | |
| (20-100) A | ≤10° | |
| (100-120) A | ≤5° |
Ukulayisha ngokweqile: 120 Okuqhubekayo
100 mV/A, (1 V at 10 ARMS)
| Ibanga | Ukunemba | Isigaba Shift |
| (0.1-0.5) A | ≤3 % ± 10 mV | N/A |
| (0.5-2) A | N/A | |
| (2-10) A | ≤15° | |
| (10-12) A |
Ukulayisha ngokweqile: 12 Okuqhubekayo
I-Frequency Range (nokwehla kwamanje):
1 Hz kuya ku-100 kHz (@ -3 dB); ukwehla kwamanje ngaphezu kuka-1 kHz kusetshenziswa ifomula ethi 1000 A x 1/(F (nge-kHx))
Bheka amajika avamile wokuphendula (amakhasi 10-12)
I-Crest Factor: ≤ 6
Ukuphazamiseka Komthwalo: ≥1 MΩ @ ≤ 47 pF
Isikhathi Sokuvuka/Esekwindla: <40 µS
Ukusebenza Voltage: 600 V CAT III
Imodi ejwayelekile Voltage: 600 V CAT III
Umthelela We-Adjacent Conductor: < 0.2 mA/AAC
Ithonya Lesikhundla Somqhubi Ekuvuleni Emihlathini: 0.02 % Ukufunda ngaphansi kuka-400 Hz
Umthelela Wemvamisa:
| Ibanga 1 mV/A: | Kusukela (10 kuya ku-1000) Hz: <1 % Yokufunda Kusuka ku-(1 kuya ku-10) kHz: <2 % Yokufunda Kusuka ku-(10 kuya ku-50) kHz: <10 % Yokufunda Kusuka ku-(50 kuye ku-100) kHz: – 3 dB |
| Ibanga 10 mV/A: | Kusukela (10 kuya ku-1000) Hz: <5 % Yokufunda Kusuka ku-(1 ukuya ku-10)kHz: <3 % Wokufunda Kusuka ku-(10 kuya ku-50) kHz: <20 % Yokufunda Kusuka ku-(50 kuye ku-100) kHz: – 3 dB |
| Ibanga 100 mV/A: | Kusukela (10 kuya ku-1000) Hz: <10 % Yokufunda Kusuka ku-(1 ukuya ku-10) kHz: <5 % Yokufunda Kusuka ku-(10 kuya ku-50) kHz: <20 % Yokufunda Kusuka ku-(50 kuye ku-100) kHz: – 3 dB |
3.2 IZINKCACISO ZEMITHETHO
Ubukhulu: (4.4 x 8.5 x 1.8) ku-(111 x 216 x 45) mm
Isisindo: (1.21 lbs) (550 g)
Ukuvuleka Kwemihlathi: (2.25 in) (57 mm) ubuningi
Ubukhulu Bekhebula Ububanzi: (2.13 in) (54 mm)
Ubukhulu Usayizi Womqhubi:
Ikhebula: (2.05 in) (52 mm)
Ibha Yebhasi: (1.95 x .19 in) (50 x 5 mm)
Ukuvikelwa Kwecala: IP 40 (IEC 529)
Ukuhlolwa kokulahla: 1 m (IEC 68-2-32)
Ukushaqeka Komshini: 100 g (IEC 68-2-27)
Ukudlidliza: (5 ukuya ku-15) Hz, 0.15 mm (IEC 68-2-6)
(15 ukuya ku-25) Hz, 1 mm (25 ukuya ku-55) Hz, 0.25 mm
Okukhiphayo: Umthofu ovalekile onesixhumi se-BNC esivalekile, 6 ft (2 m)
3.3 IMINININGWANE YENDAWO
Izinga Lokushisa Lokusebenza/RH: (14 kuya ku-122) °F (-10 ukuya ku-50) °C)
Izinga Lokushisa Lokugcina/RH: (- 4 ukuya ku-158) °F (-20 ukuya ku-70) °C
Ukuphakama: Okungasebenzi: (0 kuya ku-12,000) m
Ukusebenza: (0 kuya ku-2000) m
Ukuswakama Okuhlobene Okusebenzayo: (0 ukuya ku-85) % @ 35 °C
Umthelela Wezinga Lokushisa: ≤0.15 % / 10 K
Ithonya Lokuswakama: (10 kuya ku-90) %: 0.1 %
3.4 IMICIMBI YOKUPHEPHA
Ezogesi – Ukuhambisana Nezimo Zamazwe Ngamazwe
Leli thuluzi lihambisana ne-IEC 61010-2-032, 300 V ku-CAT IV noma 600 V ku-CAT III.
I-insulation ephindwe kabili noma eqinisiwe
Uhlobo lwenzwa yamanje nge-IEC 61010-2-032: uhlobo A
Amandla e-Dielectric: 5550 V, 50/60 Hz phakathi kweprimary, secondary, kanye nekesi langaphandle lesibambo
Ukuvumelana kwe-Electromagnetic:
Le divayisi ihambisana ne-IEC 61326-1 ejwayelekile.
*Imininingwane ingashintsha ngaphandle kwesaziso.
3.5 AMAGEZA EMPENDULO EYAVAMILE
1mV/A Ububanzi:
10mV/A Ububanzi:
100mV/A Ububanzi:
UKUSEBENZA
4.1 ISILINGANISO SAMANJE
ISEXWAYISO: Njalo xhuma i-probe ensimbini ngaphambi kokufundaampukungena kusekethe ngaphansi kokuhlolwa.
- Xhuma i-Model SR661 kushaneli yokufaka efanele ku-oscilloscope.
- Qala ngobubanzi obuzwela kancane kuphequluli yamanje (1 mV/A)
- Khetha ibanga elingu-0.5 V/Division ku-oscilloscope.
- Clamp i-probe ku-conductor okufanele ikalwe futhi ufunde yamanje egeleza ngqo ku-oscilloscope yakho.
QAPHELA: Khumbula unclamp i-probe evela ku-conductor ngaphambi kokuyinqamula kumitha noma insimbi yakho.
Ungasebenzisa futhi i-oscilloscope yakho ukuze ampphakamisa isignali ngenkathi usebenzisa uhla lwe-probe engu-1 mV/A (olunikeza ukunemba okungcono kakhulu kanye noshintsho lwesigaba esincane).
QAPHELA: Kungenzeka ukuguqula ububanzi ku-probe yamanje ngaphandle kokukhipha i-probe ku-conductor yamanje ephethe, kodwa kubalulekile ukukhumbula ukungeqi izilinganiso eziphakeme ezivunyelwe ze-2000 mV peak noma 4000 mV peak to peak maximum.
Izilinganiso eziphezulu ngobubanzi yilezi: 20 A peak @ 100 mV/A, 200 A peak @ 10 mV/A kanye no-2000 A peak @ 1 mV/A.
AMANDENI
ISEXWAYISO
- Ukuqinisekisa ukusebenza kahle, kubalulekile ukugcina izindawo zokukhwelana zemihlathi zihlanzekile ngaso sonke isikhathi. Ukwehluleka ukwenza kanjalo kungase kubangele iphutha ekufundeni.
- Ukuze kusetshenziswe ukugcinwa okucacisiwe kuphela izingxenye ezishintshayo zasembonini.
- Ukuze ugweme ukushaqeka kukagesi, ungazami ukwenza noma iyiphi isevisi ngaphandle uma ufanelekile ukwenza kanjalo.
- Ukuze ugweme ukushaqeka kukagesi kanye/noma ukulimala kwethuluzi, ungavumeli amanzi noma ezinye izinto zangaphandle zingene ekesini.
- Nqamula iyunithi kuwo wonke amasekhethi namakhebuli okuhlola ngaphambi kokuvula ikesi.
- Qaphela ngamathuluzi ensimbi angase abe amaphekhi ebhethri abe mfushane, izinsiza zamandla, njll.
5.1 UKUHLANZA
- Ukuhlanza umzimba wophenyo, sebenzisa indwangu ethambile dampefakwe kwikhambi lokuhlanza elithambile namanzi. Ukuze uhlanze umongo, vula umhlathi bese uhlanza izindawo ezisobala eziwumgogodla ngeswabhu kakotini dampefakwe nge-isopropyl alcohol (isopropanol) noma i-ethyl alcohol (ifotocol noma i-ethanol). Gcoba izindawo zokukhwelana emihlathini ngamafutha alula.
- Ungasebenzisi amakhemikhali aqukethe i-benzine, i-benzene, i-toluene, i-xylene, i-acetone, noma izinyibilikisi ezifanayo.
- Ungacwilisi i-probe oketshezini noma usebenzise izihlanzi ezilumayo.
5.2 UKULUNGISA NOKULINGANISA
Ukuqinisekisa ukuthi ithuluzi lakho liyahlangabezana nokucaciswa kwefekthri, sincoma ukuthi lihlelelwe ukuthi libuyele esikhungweni sethu sesevisi yefekthri ngezikhathi zonyaka owodwa ukuze lilungiswe kabusha, noma njengoba kudingwa ngamanye amazinga noma izinqubo zangaphakathi.
Okokulungisa nokulinganisa izinsimbi:
Kufanele uxhumane neSikhungo sethu Sesevisi ukuze uthole Inombolo Yokugunyazwa Kwesevisi Yekhasimende (CSA#). Thumela i-imeyili ku repair@aemc.com ucela i-CSA#, uzonikezwa Ifomu le-CSA namanye amaphepha adingekayo kanye nezinyathelo ezilandelayo zokuqedela isicelo. Bese ubuyisela ithuluzi kanye nefomu le-CSA elisayiniwe. Lokhu kuzoqinisekisa ukuthi uma insimbi yakho ifika, izolandelelwa futhi icutshungulwe ngokushesha.
Sicela ubhale i-CSA# ngaphandle kwesiqukathi sokuthumela. Uma ithuluzi libuyiselwa ukuze lilinganiswe, sidinga ukwazi uma ufuna ukulinganisa okujwayelekile noma ukulinganisa okulandelekayo ku-NIST (kuhlanganisa nesitifiketi sokulinganisa kanye nedatha yokulinganisa erekhodiwe).
Thumela Ku: Chauvin Arnoux® , Inc. dba AEMC Amathuluzi
15 Faraday Drive • Dover, NH 03820 USA
Ucingo: 800-945-2362 (Ext. 360) / 603-749-6434 (Ext. 360)
Ifeksi: 603-742-2346
I-imeyili: repair@aemc.com
(Noma xhumana nomsabalalisi wakho ogunyaziwe.)
Xhumana nathi ngezindleko zokukhanda, ukulinganisa okujwayelekile, nokulinganisa okulandelekayo ku-NIST
QAPHELA: Kufanele uthole i-CSA# ngaphambi kokubuyisela noma iyiphi insimbi.
5.3 USIZO LOBUCHWEPHESHE
Uma uhlangabezana nanoma yiziphi izinkinga zobuchwepheshe noma udinga noma yiluphi usizo ngokusebenza kahle noma ukusebenzisa ithuluzi lakho, sicela ushayele, i-imeyili noma ufeksele ithimba lethu labasekeli bezobuchwepheshe:
Chauvin Arnoux ® , Inc. dba AEMC Amathuluzi
Ucingo: 800-343-1391 (Ext. 351)
Ifeksi: 603-742-2346
I-imeyili: techsupport@aemc.com
www.aemc.com
5.4 ISIQINISEKISO ESIKHAWULE
Ithuluzi liqinisekiswa kumnikazi isikhathi esiyiminyaka emibili kusukela osukwini lokuthenga kwasekuqaleni ngokumelene nezingqinamba ekukhiqizeni. Lesi siqinisekiso esilinganiselwe sinikezwa i-AEMC
Izinsimbi, hhayi ngomsabalalisi ethengwe kuye. Lesi siqinisekiso asinalutho uma iyunithi ibiyi-tampihlukunyeziwe, noma uma isici sihlobene nesevisi engenziwanga i-AEMC® Instruments.
Ukufakwa kwewaranti ephelele nokubhaliswa komkhiqizo kuyatholakala kithi webindawo ku www.aemc.com/warranty.html.
Sicela uphrinte Ulwazi Lwewaranti eku-inthanethi lwamarekhodi akho.
Okuzokwenziwa yi-AEMC Instruments:
Uma kwenzeka ukungasebenzi kahle phakathi nesikhathi sewaranti, ungasibuyisela ithuluzi ukuze sililungise, inqobo nje uma sinolwazi lokubhaliswa kwewaranti yakho. file noma ubufakazi bokuthenga. I-AEMC
Izinsimbi zizolungisa noma zibuyisele izinto ezinephutha ngokubona kwethu.
BHALISA KU-INTANETHI KWA: www.aemc.com/warranty.html
5.4.1 Ukulungiswa Kwesiqinisekiso
Okufanele ukwenze ukuze ubuyisele Ithuluzi Lokulungiswa Kwewaranti:
Okokuqala, thumela i-imeyili ku repair@aemc.com ukucela Inombolo Yokugunyazwa Kwesevisi Yekhasimende (CSA#) eMnyangweni wethu Wesevisi. Uzonikezwa Ifomu le-CSA namanye amaphepha adingekayo kanye nezinyathelo ezilandelayo zokuqedela isicelo. Bese ubuyisela ithuluzi kanye nefomu le-CSA elisayiniwe. Sicela ubhale i-CSA# ngaphandle kwesiqukathi sokuthumela. Buyisa insimbi, postage noma ukuthunyelwa kukhokhwe kusengaphambili ku-: Chauvin Arnoux® , Inc. dba AEMC Instruments
15 Faraday Drive, Dover, NH 03820 USA Ucingo: 800-945-2362 (Ext. 360) 603-749-6434 (Ext. 360) Ifeksi: 603-742-2346 I-imeyili: repair@aemc.com
Isexwayiso: Ukuze uzivikele ekulahlekeni kwezinto zokuhamba, sincoma ukuthi ufake umshwalense wokusebenza kwakho okubuyisiwe.
QAPHELA: Kufanele uthole i-CSA# ngaphambi kokubuyisela noma iyiphi insimbi.
I-AEMC ®
Izinsimbi
15 Faraday Drive • Dover, NH 03820 USA
Ucingo: +1 603-749-6434 • +1 800-343-1391 • Ifeksi: +1 603-742-2346
www.aemc.com
© 2009 Chauvin Arnoux®
, Inc. dba AEMC®
Izinsimbi. Wonke Amalungelo Agodliwe.
Amadokhumenti / Izinsiza
 |
I-AEMC INSTRUMENTS SR661 AC Current Oscilloscope Probe [pdf] Imaniwali yosebenzisayo I-SR661 AC Current Oscilloscope Probe, SR661, AC Current Oscilloscope Probe, Current Oscilloscope Probe, Oscilloscope Probe, Probe |