I-Multimeter engu-5233 yedijithali
Imaniwali yosebenzisayo
I-Multimeter engu-5233 yedijithali
5233
I-DIGITAL MULTIMETER
Ngokutholwa Okungeyena Othintwayo
Isitatimende Sokuhambisana
I-Chauvin Arnoux ® , Inc. dba I-AEMC ® Instruments iqinisekisa ukuthi leli thuluzi lilinganiselwe kusetshenziswa amazinga namathuluzi alandeleka kuzindinganiso zamazwe ngamazwe.
Siyaqinisekisa ukuthi ngesikhathi sokuthunyelwa insimbi yakho ihlangabezane nezicaciso zayo ezishicilelwe.
Isitifiketi esilandelekayo se-NIST singase sicelwe ngesikhathi sokuthenga, noma sitholwe ngokubuyisela ithuluzi endaweni yethu yokulungisa nokulinganisa, ngenkokhiso encane.
Isikhawu sokulinganisa esinconyiwe saleli thuluzi izinyanga eziyi-12 futhi siqala ngedethi yokutholwa yikhasimende. Ukuze ulungise kabusha, sicela usebenzise izinsizakalo zethu zokulinganisa. Bheka esigabeni sethu sokulungisa nokulinganisa kokuthi www.aemc.com.
Inombolo yomkhiqizo: ___________________________________
Ikhathalogi #: 2125.65
Imodeli #:5233
Sicela ugcwalise usuku olufanele njengoba kukhonjisiwe:
Usuku etholwe ngalo: ___________________________________
Idethi Yokulinganisa Ifuneka: ____________________
ISINGENISO
Isexwayiso
Le divayisi ithobelana nezinga lokuphepha le-IEC-61010-1 (Ed 2–2001) levolumutagkufika ku-1000V CAT III noma 600V CAT IV, endaweni yokuphakama engaphansi kuka-2000m, ngaphakathi endlini, ngezinga lokungcola elingengaphezu kuka-2.
Ukwehluleka ukugcina imiyalelo yezokuphepha kungase kubangele ukushaqeka kukagesi, umlilo, ukuqhuma, noma ukucekelwa phansi kwethuluzi nezinto ezifakiwe.
- Ungasebenzisi ithuluzi endaweni eqhumayo noma lapho kukhona amagesi avuthayo noma intuthu.
- Ungasebenzisi ithuluzi kumanethiwekhi lapho voltage noma isigaba sidlula lezo ezishiwo.
- Ungeqi ivolumu ephezulu elinganiselwetagama-currents phakathi kwamatheminali noma ngokuphathelene nomhlaba/umhlabathi.
- Ungasebenzisi ithuluzi uma libonakala lonakele, lingaphelele, noma lingavalwanga kahle.
- Ngaphambi kokusetshenziswa ngakunye, hlola isimo se-insulation kumkhondo, izindlu, kanye nezinsiza. Noma iyiphi into ewohlokayo (ngisho nayingxenye) kufanele ibekelwe eceleni ukuze ilungiswe noma ilahlwe.
- Sebenzisa umkhondo kanye nezinsiza ezilinganiselwe nge-voltages nezigaba okungenani ezilingana nalezo zethuluzi.
- Qaphela izimo zemvelo zokusetshenziswa.
- Ungalishintshi ithuluzi futhi ungafaki izingxenye "ezilinganayo". Ukulungisa nokulungiswa kufanele kwenziwe ngabasebenzi abaqeqeshiwe abagunyaziwe.
- Shintsha ibhethri ngokushesha nje lapho i-
uphawu luvela kuyunithi yesibonisi. Nqamula yonke imikhondo ngaphambi kokuvula ikhava yengxenye yebhethri. - Sebenzisa okokuvikela uma izimo zidingeka.
- Gcina izandla zakho zikude namatheminali angasetshenzisiwe ensimbi.
- Lapho uphatha ama-probes noma amathiphu okuxhumana, gcina iminwe yakho ngemuva konogada.
1.1 Izimpawu zikagesi zamazwe ngamazwe
|
|
Kubonisa ukuthi ithuluzi livikelwe ngokufakwa okuphindwe kabili noma okuqinisiwe. |
|
Lolu phawu ensimbini lubonisa ISEXWAYISO sokuthi u-opharetha kufanele abhekisele kumanuwali yomsebenzisi ukuze athole imiyalelo ngaphambi kokusebenzisa ithuluzi. Kuleli bhukwana, izimpawu ezandulelayo zibonisa ukuthi uma imiyalelo ingalandelwa, ukulimala komzimba, ukufakwaample kanye/noma ukulimala komkhiqizo kungase kubangele. |
|
|
Ukuhambisana ne-Low VoltagI-e & Electromagnetic Compatibility Iziqondiso zaseYurophu (73/23/CEE & 89/336/CEE) |
|
|
I-AC - I-alternate current |
|
|
I-AC noma i-DC - I-alternating noma yamanje eqondile |
|
|
Ingozi yokushaqeka kukagesi. Umqulutage ezingxenyeni ezimakwe ngalolu phawu kungase kube yingozi. |
 |
Iziyalezo ezibalulekile okufanele uzifunde futhi uziqonde ngokuphelele. |
|
|
Ulwazi olubalulekile okufanele uluvume. |
 |
Uphawu lomhlaba / lomhlaba |
|
|
Ngokuvumelana ne-WEEE 2002/96/EC |
1.2 Incazelo Yezigaba Zokulinganisa
I-CAT III: Ngezilinganiso ezenziwa ekufakweni kwesakhiwo ezingeni lokusabalalisa njengasemishinini eqinile ekufakweni okungaguquki kanye nama-circuit breaker.
I-CAT II: Ukuze uthole izilinganiso ezenziwa kumasekhethi axhunywe ngokuqondile ohlelweni lokusabalalisa ugesi. ExampLes izilinganiso zezinto zasendlini noma amathuluzi aphathekayo.
I-CAT IV: Ezilinganisweni ezenziwe endaweni kagesi eyisisekelo (<1000V) njengakumadivayisi ayinhloko okuvikela i-overcurrent, amayunithi okulawula i-ripple, noma amamitha.
1.3 Ukuthola Ukuthunyelwa Kwakho
Lapho uthola ukuthunyelwa kwakho, qiniseka ukuthi okuqukethwe kuyahambisana nohlu lokupakisha. Yazisa umsabalalisi wakho nganoma yiziphi izinto ezingekho. Uma impahla ibonakala ilimele, file isimangalo ngokushesha nesithwali futhi wazise umsabalalisi wakho ngesikhathi esisodwa, unikeze incazelo enemininingwane yanoma yimuphi umonakalo. Londoloza isiqukathi sokupakisha esilimele ukuze uqinisekise isimangalo sakho.
1.4 Ulwazi loku-oda
I-Multimeter Model 5233 ………………………………………………Ikati. #2125.65
Kufaka phakathi isethi yemikhondo enemibala emibili engu-5 ft (ebomvu/emnyama) enethiphu yenaliti (1000V CAT IV 15A), i-thermocouple Type K ene-adaptha, ikesi eliphethe elithambile kanye nebhukwana lomsebenzisi.
1.4.1 Izesekeli
Thermocouple – Flexible (1m) K-Type 58° to 480°F ………… Ikati. #2126.47
I-Multifid Mounting System………………………………………………. .Ikati. #5000.44
1.4.2 Izingxenye Ezishintshayo
I-Fuse – Isethi ka-10, 10A, 600V, 50kA, (I-Fast Blow), 5x32mm …. Ikati. #2118.62
Ikesi Eliphethe Okuthambile ………………………………………………………..Ikati. #2121.54
I-adaptha - Ubhanana (Owesilisa) kuya ku-Mini (Owesifazane)
nge-K-Type Thermocouple …………………………………………..Ikati. #2125.83
Isethi eholayo engu-2, 1.5M, enekhodi yombala enama-probe okuhlola
(1000V CAT IV 15A) …………………………………………………….Ikati. #2125.97
Oda Izesekeli Nezingxenye Zokubuyisela Ngokuqondile Ku-inthanethi Hlola Isitolo sethu sangaphambili ku www.aemc.com ngokutholakala
IZICI ZOMKHIQIZO
2.1 Incazelo
I-Model 5233 iyi-multimeter yedijithali ye-TRMS, eklanyelwe ngokukhethekile ukuhlanganisa imisebenzi ehlukahlukene kanye nezilinganiso zamanani kagesi alandelayo:
- Ukutholwa okungeyena othintana naye wokuba khona kwenethiwekhi voltage (umsebenzi we-NCV)
- I-voltmeter ye-AC ene-impedance ephansi yokufaka (voltagizilinganiso zikagesi nobunjiniyela bakagesi)
- I-voltmeter ye-AC/DC ene-impedance ephezulu yokufaka (voltagizilinganiso ze-elekthronikhi)
- Izilinganiso zomjikelezo wemvamisa nomsebenzi
- I-Ohmmeter
- Ukuhlola ukuqhubeka nge-buzzer
- Ukuhlolwa kwe-Diode
- I-Ammeter
- Imitha yokulinganisa
- I-thermometer ku-°C noma °F ngesilinganiso nangomugqa wevolumutage ngaphesheya kwamatheminali e-thermocouple yohlobo lwe-K
2.2 Izici zokulawula
- Inzwa yokuthola i-NCV (bona § 3.5)
- Isibonisi se-analogi nedijithali (bona § 2.3)
- Izinkinobho zomsebenzi (bona § 2.4)
- Iswishi ejikelezayo (bona § 2.5)
- Isilinganiso samanje setheminali engu-10A (bona § 3.12)
- Okokufaka okuhle (Okubomvu) nokokufaka kwe-COM (Mnyama).
2.3 Izici zokubonisa
|
Isithonjana |
Umsebenzi |
|
AC |
Iyashintshana Yamanje |
|
DC |
I-Direct Current |
|
NGOKUZENZAKALELAYO |
Ukukhetha ububanzi okuzenzakalelayo (bona § 3.4) |
|
BAMBA |
Ifriza isibonisi sesilinganiso |
|
MAX |
Inani eliphakeme le-RMS |
|
MIN |
Inani elincane le-RMS |
|
I-REL |
Inani elihlobene |
|
|
Uphawu Lomthwalo Ongaphezulu luboniswa lapho isignali elinganiswayo idlula ububanzi bocingo |
|
V |
Voltage |
|
Hz |
Hertz |
|
% |
Duty Cycle |
|
F |
Farad |
|
°C |
Amadigri Celsius |
|
°F |
Izinga likaFahrenheit |
|
A |
Amplapha |
|
Ω |
Ohm |
|
n |
Isiqalo esithi “nano” |
|
µ |
Isiqalo “micro” |
|
m |
Isiqalo esithi “milli” |
|
k |
Isiqalo esithi “kilo” |
|
M |
Isiqalo "Mega" |
|
|
I-Continuity Beeper inikwe amandla |
|
|
Ukuhlolwa kweDiode |
|
|
Ibhethri Eliphansi |
 |
Umsebenzi wokuvala amandla okuzenzakalelayo uyasebenza |
2.4 Imisebenzi Yenkinobho
|
Inkinobho |
Umsebenzi |
|
|
• Ukukhetha uhlobo lokulinganisa QAPHELA: Imodi ye-DC yenziwa isebenze ngokuzenzakalelayo • Icupha/Yenza Ukuvala Okuzenzakalelayo kusebenze ekuqaleni (bona § 3.3) |
|
|
• Ivumela ukukhethwa okwenziwa mathupha kobubanzi bokulinganisa (ukucindezela okufushane) • Ibuyela kumodi yebanga elizenzakalelayo (cindezela isikhathi eside >2s) QAPHELA: Amamodi wokuqhubeka kanye ne-Diode awazingeli ngokuzenzakalela |
|
|
• Cindezela kanye ukuze uvule imodi engu-MAX/MIN; cindezela >2s ukuze uphume • Uma isicushiwe, cindezela ku view i-MAX, MIN kanye nenani lamanje QAPHELA: Imodi engu-MAX yenziwa yasebenza ngokuzenzakalelayo |
|
|
• Imisa/Yeka ukufriza isibonisi senani elilinganisiwe (ukucindezela okufushane) • Icupha/Yenza kungasebenzi isibani sangemuva sesibonisi  (cindezela isikhathi eside >2s) |
|
|
• Ibonisa imvamisa yesignali ye-AC elinganiswayo, kanye nomjikelezo womsebenzi QAPHELA: Lokhu akusebenzi kumodi ye-DC |
|
|
• Ibonisa inani elihlobene nereferensi egcinwe lapho ukhiye ucindezelwa Example: Uma inani eligcinwe lapho ukhiye ucindezelwa lilingana no-10V futhi inani lamanje lingu-11.5V, isibonisi esikumodi ehlobene sizoba ngu-11.5 – 10 = 1.5V. QAPHELA: Ibanga elizenzakalelayo lenziwe langasebenzi kule modi |
2.5 Imisebenzi ye-Rotary
|
Ibanga |
Umsebenzi |
|
VALIWE |
Amandla phansi multimeter |
|
|
I-impedance ephansi ye-AC voltagisilinganiso |
|
|
AC noma DC voltagi-e measurement (V) |
 |
AC noma DC voltagi-e measurement (mV) |
 |
Isilinganiso sokumelana; Ukuhlolwa kokuqhubeka; Ukuhlolwa kwe-Diode |
|
|
Ukukalwa kokulinganisa |
|
° C / ° F |
Ukulinganisa izinga lokushisa |
|
|
Isilinganiso samanje se-AC noma se-DC |
|
|
I-NCV (Non-contact Voltage) + Imodi ye-OFF Ingxenye ye-multimeter (umsebenzi we-NCV uyasebenza) |
UKUSEBENZA
3.1 UKUVULA I-Multimeter
Vula iswishi kumsebenzi ofanele. Wonke amasegimenti esibonisi azokhanya imizuzwana embalwa. Isikrini esihambisana nomsebenzi okhethiwe sizobe sesivela. I-multimeter manje isilungele ukukalwa.
3.2 Ukuvala i-Multimeter
Ukuze uvale imitha ngokwenza, vula iswishi ukuze VALIWE. Uma ishiywe ingasetshenzisiwe imizuzu engu-15, imitha izocisha ngokuzenzakalelayo. Ngemizuzu engu-14, amabhiphu amahlanu axwayisa ngokuthi imitha isizocishwa. Ukuze uvule futhi, cindezela noma iyiphi inkinobho kuyunithi.
QAPHELA: I
isikhundla asicimi ngokuphelele i-multimeter. Ihlala isebenza ukuze kutholwe abantu abangathintwayo ubukhona benethiwekhi voltage (NCV).
3.3 Ukuqalisa/Yenza Ukuvala Okuzenzakalelayo
Ngokuzenzakalelayo, i-Auto-OFF iyasebenza futhi i uphawu luyaboniswa.
Ukucindezela isikhathi eside ku-
inkinobho ngesikhathi sokuqalisa, ngenkathi uguqulela iswishi kunoma ibuphi uhla, yenza kungasebenzi umsebenzi we-Auto-OFF. I uphawu aluboniswa.
3.4 Ukukhetha Uhla Lokuzenzakalela kanye Nokwenza
Ngokuzenzakalelayo, imitha iku-auto-range. Lokhu kuboniswa uphawu lwe-AUTO esibukweni. Ngenkathi ivuliwe, ithuluzi lizozivumelanisa ngokuzenzakalelayo nebanga elifanele lokulinganisa lapho ithatha isilinganiso.
Ukushintsha ukukhetha kobubanzi kube Manuwali, cindezela u-
inkinobho.
3.5 Ongathintana Naye Umqtage (NCV)
- Guqula iswishi ejikelezayo iye ku- I-NCV isikhundla.
- Hambisa i-Model 5233 (inzwa yokutholwa kwe-NCV) eduze kwe-conductor okungenzeka iphile (ukuba khona kwesigaba).
Uma inethiwekhi voltagI-e ye-90V ikhona, ukukhanya okungemuva kukhanyisa ngokubomvu, ngaphandle kwalokho, kuhlala kuvaliwe.
3.6 Umqtage Ukukala
I-Model 5233 ikala i-AC voltage nge-impedance ephansi yokufaka (VLOWZ), I-DC kanye ne-AC voltages.
- Setha ukushintshela kokuthi
,
, or . Uma isethwe ukuze idivayisi ikumodi ye-AC kuphela. - Ngoba or , khetha i-AC noma i-DC ngokucindezela . Ngokuzenzakalelayo imitha ikumodi ye-DC.
- Faka umthofu obomvu kujeke wokufaka obomvu othi “+” kanye nomthofu omnyama kujekhi yokufaka ethi “COM” emnyama.
- Xhuma amathiphu e-test probe ku-sample under test.
3.7 Isilinganiso Sokumelana
ISEXWAYISO: Uma wenza isilinganiso sokumelana, qiniseka ukuthi ugesi ucishiwe (i-de-energized circuit). Kubalulekile futhi ukuthi wonke ama-capacitor kumjikelezo olinganisiwe akhishwe ngokugcwele.
- Guqula iswishi ejikelezayo iye ku- ububanzi.
- Faka umthofu obomvu kujeke wokufaka obomvu othi “+” kanye nomthofu omnyama kujekhi yokufaka ethi “COM” emnyama.
- Xhuma amathiphu e-test probe ku-sample under test.
3.8 Ukuhlola Ukuqhubeka
ISEXWAYISO: Uma wenza isilinganiso sokumelana, qiniseka ukuthi ugesi ucishiwe (i-de-energized circuit).
- Guqula iswishi ejikelezayo iye ku- isikhundla.
- Cindezela inkinobho inkinobho. I
uphawu luyaboniswa. - Faka umthofu obomvu kujeke wokufaka obomvu othi “+” kanye nomthofu omnyama kujekhi yokufaka ethi “COM” emnyama.
- Xhuma amathiphu e-test probe ku-sample under test.
- I-buzzer ikhala lapho isekethe okufanele ihlolwe kuyi-DC noma inokumelana okungaphansi kuka-100Ω ± 3Ω.
Ukuhlolwa kwe-Diode 3.9
ISEXWAYISO: Uma wenza isilinganiso se-diode, qiniseka ukuthi ugesi ucishiwe (i-de-energized circuit).
- Guqula iswishi ejikelezayo iye ku- isikhundla.
- Cindezela inkinobho inkinobho kabili. I-
uphawu luyaboniswa. - Faka umthofu obomvu kujeke wokufaka obomvu othi “+” kanye nomthofu omnyama kujekhi yokufaka ethi “COM” emnyama.
- Xhuma amathiphu e-test probe ku-sample under test.
3.10 Ukuhlolwa Kwekhono
ISEXWAYISO: Uma wenza isilinganiso se-capacitance, qiniseka ukuthi ugesi ucishiwe (i-de-energized circuit). Qaphela i-polarity yokuxhumana (+ kuya kutheminali ebomvu, - kutheminali emnyama).
- Qinisekisa ukuthi i-capacitor ezolinganiswa ikhishiwe.
- Guqula iswishi ejikelezayo iye ku-
isikhundla. - Faka umthofu obomvu kujeke wokufaka obomvu othi “+” kanye nomthofu omnyama kujekhi yokufaka ethi “COM” emnyama.
- Xhuma amathiphu e-test probe ku-sample under test.
3.11 Ukuhlolwa kwezinga lokushisa
- Guqula iswishi ejikelezayo iye ku- ºC/ºF isikhundla.
- Cindezela inkinobho inkinobho yokukhetha iyunithi yezinga lokushisa nesikali (ºC/ ºF)
- Xhuma i-adaptha yokuhlola izinga lokushisa kumatheminali ethi “COM” kanye “+”, ubheka ukuhlukahluka.
- Xhuma i-probe yezinga lokushisa ku-adaptha, ubheka i-polarity.
QAPHELA: Uma i-probe inqanyuliwe noma i-open-circuit, iyunithi yokubonisa iyabonisa
.
- Guqula iswishi ejikelezayo iye ku-
isikhundla. - Khetha i-AC noma i-DC ngokucindezela inkinobho inkinobho. Ngokuzenzakalelayo imitha ikumodi ye-DC. Ngokuya ngokukhethiwe, isikrini sibonisa i-AC noma i-DC.
- Faka umthofu obomvu kujeke wokufaka we-“10A” kanye nomthofu omnyama kujeke wokufaka we-“COM”.
- Xhuma i-multimeter kuchungechunge kusekethe.
AMANDENI
4.1 Isexwayiso
- Susa imikhondo yokuhlola kunoma yikuphi okokufaka ngaphambi kokuvula ikesi. Ungalusebenzisi ithuluzi ngaphandle kwekhava yekesi yebhethri.
- Ukuze ugweme ukushaqeka kukagesi, ungazami ukwenza noma iyiphi isevisi ngaphandle uma ufanelekile ukwenza kanjalo.
- Uma imitha ingeke isetshenziswe isikhathi eside, khipha amabhethri. Ungayigcini imitha emazingeni okushisa aphezulu noma kunomswakama ophezulu.
- Ukuze ugweme ukushaqeka kukagesi kanye/noma ukulimala kwethuluzi, ungatholi amanzi noma amanye ama-agent angaphandle ku-probe.
4.2 Ukushintshwa Kwebhethri
- Amabhethri azodinga ukushintshwa uma i uphawu luvela esibukweni.
- Imitha kufanele ibe ku- VALIWE isikhundla futhi inqanyuliwe kunoma iyiphi isekethe noma okokufaka.
- Usebenzisa i-screwdriver, qaqa izikulufu ezine zekhava yekhompathi yebhethri ngemuva kwendlu.
- Shintshanisa ibhethri elidala ngebhethri elilodwa elisha le-9V, ubheka ukuhlukahluka.
- Shintshanisa ikhava yekhompathi yebhethri bese uqinisa izikulufu.
4.3 Ukushintshwa kwe-Fuse
- Imitha kufanele ibe ku- VALIWE isikhundla futhi inqanyuliwe kunoma iyiphi isekethe noma okokufaka.
- Usebenzisa i-screwdriver, qaqa izikulufu ezine zekhava yekhompathi yebhethri ngemuva kwendlu.
- Susa i-fuse eshaywayo usebenzisa i-screwdriver.
- Faka i-fuse entsha efanayo (10A, 600V, 50kA, Fast Blow, 5x32mm), bese uyisikulufa ikhava uyibuyisele endlini.
4.4 Ukuhlanza
- Nqamula yonke imikhondo ensimbini bese usetha iswishi ukuthi IVALI.
- Ukuze uhlanze insimbi, sula ikesi ngesikhangisoamp indwangu kanye ne-detergent ethambile. Ungasebenzisi ama-abrasives noma ama-solvents. Yomisa kahle ngaphambi kokusetshenziswa.
- Ungatholi amanzi ngaphakathi kwekesi. Lokhu kungase kubangele ukushaqeka kukagesi noma ukulimala kwethuluzi.
IMICIMBI
Izimo Eziyisethenjwa: Ukunemba kunikezwa @ 23°C ± 2°C; Umswakama Ohlobene 45 kuya ku-75%; Supply Voltage 8.5V ± 0.5V; Kusukela ku-10% ukuya ku-100% webanga ngalinye lokulinganisa.
| AMAGEZI | ||||||||
| I-DC (mVDC) | I-60mV | I-600mV | ||||||
| Isixazululo | I-0.01mV | I-0.1mV | ||||||
| Ukunemba (±) | 1% + 12cts | 0.6% + 2cts | ||||||
| Okokufaka Impedance | 10MΩ | |||||||
| I-DC (VDC) | I-600mV | 6V | 60V | 600V | 1000V* | |||
| Isixazululo | I-0.1mV | 0.001V | 0.01V | 0.1V | 1V | |||
| Ukunemba (±) | 0.6% + 2cts | 0.2% + 2cts | 0.2% + 2cts | |||||
| Okokufaka Impedance | 10MΩ | |||||||
| I-AC (mVAC TRMS) | I-60mV | I-600mV | ||||||
| Isixazululo | I-0.01mV | I-0.1mV | ||||||
| Ukunemba (±) 40 kuya ku-60Hz | 2% + 12cts | 2% + 3cts | ||||||
| Ukunemba (±) 60Hz ukuya ku-1kHz | 2.5% + 12cts | 2.5% + 3cts | ||||||
| Okokufaka Impedance | 10MΩ | |||||||
| I-AC (VAC TRMS) | 6V | 60V | 600V | 1000V | ||||
| Isixazululo | 0.001V | 0.01V | 0.1V | 1V | ||||
| Ukunemba (±) 40 kuya ku-60Hz | 2% + 3cts | 2.5% + 3cts | ||||||
| Ukunemba (±) 60Hz ukuya ku-1kHz | 2.5% + 3cts | 2.5% + 3cts | ||||||
| Okokufaka Impedance | 10MΩ | |||||||
| I-AC (VAC LowZ TRMS)* | 6V | 60V | 600V | 1000V | ||||
| Isixazululo | 0.001V | 0.01V | 0.1V | 1V | ||||
| Ukunemba (±) 40 kuya ku-60Hz | 2% + 10cts | |||||||
| Okokufaka Impedance | 270kÎ © | |||||||
* Ngokwemithetho yezokuphepha, ububanzi be-1000V bukhawulelwe ku-600V.
** QAPHELA: I-impedance ephansi yokufaka isebenza ukuqeda imithelela yokuphazamiseka voltagngenxa yenethiwekhi yokuhlinzeka futhi yenza kube nokwenzeka ukukala i-AC voltage enephutha elincane.
| AMAGEZI | ||||||
| Ukumelana | 600W | 6kW | 60kW | 600kW | 6MW | 60MW |
| Isixazululo | 0.1W | 0.001kw | 0.01kw | 0.1kw | 0.001MW | 0.01MW |
| Ukunemba (±) | 2% + 2cts | 0.3% + 4cts | 0.5% + 20cts | |||
| Ukuhlola Ukuqhubeka | 600W | |||||
| Isixazululo | 0.1W | |||||
| Isilinganiso samanje | < 0.35mA | |||||
| Ukunemba (±) | Isignali ezwakalayo <20W + 3W | |||||
| Ukuhlolwa kweDiode | 2.8V | |||||
| Isixazululo | 0.001V | |||||
| I-Open-circuit Voltage | <2.8V | |||||
| Isilinganiso samanje | < 0.9mA | |||||
| Ukunemba (±) | 2% + 5cts | |||||
| Imvamisa (V/A) | 10 ukuze 3000Hz | |||||
| Isixazululo | 0.01Hz | |||||
| Ukunemba (±) | 0.5% | |||||
| Ukuzwela | Ama-15Vrms | |||||
| Duty Cycle | 0.1 ukuya ku-99.9% | |||||
| Isixazululo | 0.1% | |||||
| Ukunemba (±) | 1.2% + 2cts | |||||
| Imvamisa | 5Hz kuya ku-150kHz | |||||
| Amandla | 40nF | 400nF | 4µF | 40µF | 400µF | 1000µF |
| Isixazululo | 0.01nF | 0.1nF | 0.001µF | 0.01µF | 0.1µF | 1µF |
| Ukunemba (±) | 4% + 4cts | 6% + 5cts | ||||
| Izinga lokushisa | -20 kuya ku-760°C | – 4 kuya ku-1400°F | ||||
| Isixazululo | 1°C | 1°F | ||||
| Ukunemba (±) (okungafaki uhlobo lwe-K-thermocouple) | 2% + 5°C | 2% + 9°F | ||||
| Ubukhulu/Obuncane | ||||||
| Thatha isikhathi | 400ms | |||||
| Ukunemba (±) | Engeza u-0.5% +2cts ekunembeni komsebenzi nobubanzi obusetshenzisiwe | |||||
| I-DC Yamanje (10ADC) | 6A | 10A * | ||||
| Isixazululo | 0.001A | 0.01A | ||||
| Ukuvikelwa | Fast blow fuse F10A/600V/50kA, 6.3×32 | |||||
| Ukunemba (±) | 1.5% + 3cts | |||||
| I-AC Yamanje (10AAC) | 6A | 10A * | ||||
| Isixazululo | 0.001A | 0.01A | ||||
| Ukuvikelwa | Fast blow fuse F10A/600V/50kA, 6.3×32 | |||||
| Ukunemba (±) | 40Hz ukuze 1kHz; 2% + 3cts | |||||
* 15A umkhawulo wamasekhondi angu-60.
| Amandla | 9V (6LR61) ibhethri le-alkaline |
| Impilo Yebhethri | > 100 amahora |
| I-Auto Power IVALIWE | Ukuvala shaqa okuzenzakalelayo ngemva kwemizuzu engu-15 yokungasebenzi |
| ZEMVELO | |
| ITemp Esebenzayo. | 32°F ukuya ku-122°F (0°C ukuya ku-50°C) |
| Isikhathi Sokugcina. | -4°F ukuya ku-158°F (-20°C kuya ku-70°C) |
| I-RH esebenzayo | £ 90% ku-104°F (40°C) |
| Isitoreji se-RH | £ 50% ku-140°F (60°C) |
| OMAKHETHINI | |
| Ubukhulu | 6.1 x 2.95 x 2.17 ″ (155 x 75 x 55mm) |
| Isisindo | 11 oz (320g) nebhethri |
| Isilinganiso Ukutholwa | Izikhathi ezi-3 ngesekhondi |
| I-Barograph | 61 amasegimenti, ukuvuselela isikhawu 30ms |
| UKUPHEPHA | |
| Isilinganiso Sokuphepha | I-IEC/EN 61010-1, 1000V CAT III, 600V CAT IV; Idigri yokungcola 2 |
| Kuvinjelwe kabili | Yebo |
| I-electromagnetic Ukuhambisana | EN-61326/A2:2001 |
| Uhlolo Lokwehla | 1m (ngokuhambisana ne-IEC-68-2-32 ejwayelekile) |
| Ukuvikelwa Kwecala | IP54 njenge-EN 60529 ngayinye |
| CE | Yebo |
Imininingwane ingashintsha ngaphandle kwesaziso
Ukulungisa kanye Ukulinganisa
Ukuqinisekisa ukuthi ithuluzi lakho liyahlangabezana nokucaciswa kwefekthri, sincoma ukuthi lihlelelwe ukuthi libuyele esikhungweni sethu sesevisi yefekthri ngezikhathi zonyaka owodwa ukuze lilungiswe kabusha, noma njengoba kudingwa ngamanye amazinga noma izinqubo zangaphakathi.
Okokulungisa nokulinganisa izinsimbi:
Kufanele uthinte Isikhungo sethu Sesevisi ukuze uthole Inombolo Yokugunyazwa Kwesevisi Yekhasimende (CSA#). Lokhu kuzoqinisekisa ukuthi uma insimbi yakho ifika, izolandelelwa futhi icutshungulwe ngokushesha. Sicela ubhale i-CSA# ngaphandle kwesiqukathi sokuthumela. Uma ithuluzi libuyiselwa ukuze lilinganiswe, sidinga ukwazi uma ufuna ukulinganisa okuvamile, noma ukulinganisa okulandelekayo ku-NIST (Kuhlanganisa nesitifiketi sokulinganisa kanye nedatha yokulinganisa erekhodiwe).
Thumela e: AEMC® Amathuluzi
15 Faraday Drive
I-Dover, NH 03820 USA
Ucingo: 800-945-2362 (Ext. 360)
603-749-6434 (Ext. 360)
Ifeksi: 603-742-2346 or 603-749-6309
repair@aemc.com
(Noma xhumana nomsabalalisi wakho ogunyaziwe)
Izindleko zokulungisa, ukulinganisa okujwayelekile, nokulinganisa okulandelekayo ku-NIST kuyatholakala.
QAPHELA: Kufanele uthole i-CSA# ngaphambi kokubuyisela noma iyiphi insimbi.
Usizo Lobuchwepheshe Nokuthengisa
Uma uhlangabezana nanoma yiziphi izinkinga zobuchwepheshe, noma udinga noma yiluphi usizo ngokusebenza kahle noma ukusetshenziswa kwethuluzi lakho, sicela ushayele, ufekise noma uthumele i-imeyili ithimba lethu labasekeli bezobuchwepheshe:
Othintana naye: AEMC ® Izinsimbi
Ucingo: 800-945-2362 (Ext. 351)
603-749-6434 (Ext. 351)
Ifeksi: 603-742-2346
techsupport@aemc.com
Iwaranti Enomkhawuko
I-Model 5233 inikezwa igunya kumnikazi isikhathi esiyiminyaka emibili kusukela ngosuku eyathengwa ngalo uma kuqhathaniswa nezingqinamba ekwenziweni kwayo. Lesi siqinisekiso esilinganiselwe sinikezwa i-AEMC ®, hhayi umsabalalisi esithengwe kuye. Lokhu
iwaranti ayisebenzi uma iyunithi ibiyi-tampsenziwa, sihlukunyezwe noma uma isici sihlobene nesevisi engenziwanga i-AEMC ®.
Ukuthola iwaranti egcwele nenemininingwane, vakashela ku-www.aemc.com. Ulwazi lwewaranti lutholakala esigabeni sethu sesevisi yamakhasimende.
Okuzokwenziwa yi-AEMC ®:
Uma kwenzeka ukungasebenzi kahle phakathi nesikhathi sewaranti, ungabuyisela ithuluzi kithi ukuze lilungiswe, ngaphandle nje kokuthi uthumele ubufakazi bokuthenga. I-AEMC ®, ngokukhetha kwayo, izolungisa noma ibuyisele izinto ezinephutha.
Ukulungiswa Kwewaranti
Okufanele ukwenze ukuze ubuyisele Ithuluzi Lokulungiswa Kwewaranti:
Okokuqala, cela Inombolo Yokugunyazwa Kwesevisi Yekhasimende (CSA#) ngocingo noma ngefeksi evela eMnyangweni wethu Wesevisi (bona ikheli elingezansi), bese ubuyisela ithuluzi kanye neFomu le-CSA elisayiniwe. Sicela ubhale i-CSA# ngaphandle kwesiqukathi sokuthumela. Buyisa insimbi, postage noma ukuthunyelwa kukhokhwe kusengaphambili ku:
AEMC ® Izinsimbi
Umnyango Wenkonzo
15 Faraday Drive • Dover, NH 03820 USA
Ucingo: 800-945-2362 (Ext. 360)
603-749-6434 (Ext. 360)
Ifeksi: 603-742-2346 or 603-749-6309
Isexwayiso: Ukuze uzivikele ekulahlekeni kwezinto zokuhamba, sincoma ukuthi ufake umshwalense ngezinto ozibuyisile.
QAPHELA: Kufanele uthole i-CSA# ngaphambi kokubuyisela noma iyiphi insimbi.
99-MAN 100359 v7
Chauvin Arnoux® , Inc. dba AEMC ® Izinsimbi
15 Faraday Drive • Dover, NH 03820 USA •
Ucingo: 603-749-6434 • Ifeksi: 603-742-2346
www.aemc.com
I-Chauvin Arnoux ®, Inc.
dba AEMC ® Izinsimbi
www.aemc.com
Amadokhumenti / Izinsiza
 |
I-AEMC INSTRUMENTS 5233 Digital Multimeter [pdf] Imaniwali yosebenzisayo 5233, 5233 Digital Multimeter, Digital Multimeter, Multimeter |