UM3099
Imaniwali yosebenzisayo
Ungayisebenzisa kanjani i-StellarLINK
Isingeniso
I-StellarLINK iwuhlelo lokulungisa iphutha/umhleli ongaphakathi kwesifunda semindeni yama-Stellar microcontrollers kanye nemindeni ye-SPC5x microcontroller.
Qaphela: isithombe akusona isivumelwano.
Kuphelileview
I-adaptha ye-StellarLINK iyi-USB/JTAG i-debugger dongle yamadivayisi e-Stellar namadivayisi e-SPC5x. Ihambisana ne-IEEE 1149.1 JTAG Iphrothokholi.
I-adaptha ye-StellarLINK yenza uhlelo lusebenze futhi lulungiswe kumabhodi e-Stellar nasemabhodini e-SPC5x futhi inikeza uhlelo lwe-NVM (sula/uhlelo/qinisekisa).
Isivumelwano selayisense
Ukupakishwa kwaleli bhodi lokuhlola kwavalwa ngophawu oluthi, ngokwephula lolu phawu, uyavumelana nemigomo nemibandela yesivumelwano selayisensi yebhodi lokuhlola, imigomo nemibandela etholakala ku- https://www.st.com/resource/en/evaluation_board_terms_of_use/evaluationproductlicenseagreement.pdf.
Lapho ugqabula isigxivizo, wena kanye ne-STMicroelectronics nenze isivumelwano selayisense lebhodi lokuhlola, ikhophi yaso nayo ifakwe nebhodi lokuhlola ukuze kube lula.
Qaphela: Leli bhodi lokuhlola linikeza izici ezikhawulelwe kuphela zokuhlola imikhiqizo ye-ST. Ayikahlolelwa ukusetshenziswa neminye imikhiqizo futhi ayifanele noma yikuphi ukuphepha noma olunye uhlelo lokusebenza lwezentengiso noma lomthengi. Leli bhodi lokuhlola linikezwa ngenye indlela ngokuthi “NJENGOBA INGABE” futhi i-STMicroelectronics ilahla zonke iziqinisekiso, ezishiwo noma ezishiwoyo, okuhlanganisa iziqinisekiso ezishiwo zokuthengiseka nokufaneleka ngenjongo ethile.
Ukuphatha izinyathelo zokuphepha
Sicela uqikelele ukuphatha okuqukethwe kwephakheji ukuze uvimbele ukukhishwa kwe-electrostatic.
Ngaphambi kokuthi i-EVB isetshenziswe noma kusetshenziswe amandla, sicela ufunde ngokugcwele izigaba ezilandelayo zokuthi ungalimisa kanjani ibhodi ngendlela efanele. Ukwehluleka ukumisa kahle ibhodi kungase kubangele ingxenye engalungiseki, i-MCU noma i-EVB umonakalo.
Incazelo ye-Hardware
4.1 Izici ze-Hardware
I-StellarLINK inezici ezilandelayo:
- I-USB/JTAG i-debugger dongle
- Amandla angu-5 V anikezwa isixhumi esincane se-USB
- Inika amandla ukuqalisa kohlelo nokulungisa iphutha kumadivayisi e-Stellar nakumadivayisi e-SPC5x
- Ihambisana ne-IEEE 1149.1 JTAG Iphrothokholi
- Ihlanganisa uxhumano lwembobo ye-serial ngesixhumi esibonakalayo se-USB (i-virtual COM)
- Ihlinzeka ngohlelo lwe-NVM (susa/uhlelo/qinisekisa)
- Izixhumi:
- Isixhumi se-Arm® esingu-20-pin sika-JTAG/Isixhumi esibonakalayo se-DAP esikhulu
- Isixhumi sikanhlokweni samaphini angu-10 sika-JTAG/Isixhumi esibonakalayo se-DAP esikhulu
- Isixhumi sikanhlokweni samaphini angu-14 sika-JTAG esibonakalayo
- Isixhumi sikanhlokweni esinamaphini angu-3 sesixhumi esibonakalayo se-UART - Ama-LED wesimo ukuze abonise ivolumu ye-IO yethagethitage, isimo sokuxhuma, nesimo sokusebenza
- Ibanga lokushisa elisebenzayo: kusuka ku-0 kuye ku-50 °C
IZIXHUMANO EZIHLOBANE
5 Ukucushwa kwezingxenyekazi zekhompyutha ekhasini 7
4.2 Ubukhulu bezingxenyekazi zekhompuyutha
I-StellarLINK inobukhulu obulandelayo:
- Ubukhulu bebhodi: 54 mm x 38 mm x 15 mm
Ukucushwa kwezingxenyekazi zekhompuyutha
I-StellarLINK iyi-adaptha ye-USB esekelwe ku-chip ye-FTDI FT2232HL.
Umsebenzisi we-EEPROM uhlelwe ngenombolo ye-serial ehlukile.
5.1 Izixhumi
Ithebula elilandelayo lichaza izixhumi ezikhona ebhodini le-StellarLINK.
Ithebula 1. Izixhumi
| Isixhumi | Incazelo | Isikhundla |
| P1 | Isixhumi sowesifazane esincane se-USB | Uhlangothi oluphezulu lwe-A2 |
| SWJ1 | Isixhumi sikanhlokweni samaphini angu-10 sika-JTAG/Isixhumi esibonakalayo se-DAP esikhulu | Uhlangothi oluphezulu lwe-A3 |
| CN1 | Isixhumi sikanhlokweni samaphini angu-14 sika-JTAG esibonakalayo | Uhlangothi oluphezulu D2-D3 |
| CN2 | Isixhumi sikanhlokweni samaphini angu-3 sesixhumi esibonakalayo se-UART | Uhlangothi oluphezulu D1 |
| CN3 | Isixhumi se-Arm samaphini angu-20 sika-JTAG/Isixhumi esibonakalayo se-DAP esikhulu | Uhlangothi oluphezulu lwe-B4-C4 |
Isithombe esilandelayo sibonisa indawo yezixhumi ezitholakala ku-adaptha ye-StellarLINK.
IZIXHUMANO EZIHLOBANE
6 Ukuhlelwa kabushaview ekhasini 11
7 BOM ekhasini 13
5.1.1 SWJ1
Ithebula elilandelayo lichaza iphinikhodi ye-SWJ1.
Ithebula 2. SWJ1 pinout
| Phina | Incazelo |
| 1 | I-VIN |
| 2 | I-TMS |
| 3 | GND |
| 4 | I-TCK |
| 7 | GND |
| 5 | GND |
| 6 | I-TDO |
| 8 | TDI |
| 9 | GND |
| 10 | I-SRST |
IZIXHUMANO EZIHLOBANE
7 BOM ekhasini 13
5.1.2 CN1
Ithebula elilandelayo lichaza iphinikhodi ye-CN1.
| Phina | Incazelo |
| 1 | TDI |
| 2 | GND |
| 3 | I-TDO |
| 4 | GND |
| 7 | I-TCK |
| 5 | GND |
| 6 | USERID 0 |
| 8 | USERID 1 |
| 9 | SRST# |
| 10 | I-TMS |
| 11 | I-VIN |
| 12 | NC |
| 13 | NC |
| 14 | I-TRST# |
IZIXHUMANO EZIHLOBANE
7 BOM ekhasini 13
5.1.3 CN2
Ithebula elilandelayo lichaza iphinikhodi ye-CN2.
Ithebula 4. CN2 pinout
| Phina | Incazelo |
| 1 | UART_RX |
| 2 | UART_TX |
| 3 | GND |
IZIXHUMANO EZIHLOBANE
7 BOM ekhasini 13
5.1.4 CN3
Ithebula elilandelayo lichaza iphinikhodi ye-CN3.
Ithebula 5. CN3 pinout
| Phina | Incazelo |
| 1 | I-VIN |
| 2 | I-NC (ikhweza i-R21 exhunywe ku-VIN) |
| 3 | I-TRSTN |
| 4 | GND |
| 5 | TDI |
| 6 | GND |
| 7 | I-TMS |
| 8 | GND |
| 9 | I-TCK |
| 10 | GND |
| 11 | NC |
| 12 | GND |
| 13 | I-TDO |
| 14 | GND# |
| 15 | SRST# |
| 16 | GND |
| 17 | NC |
| 18 | GND |
| 19 | NC |
| 20 | GND |
IZIXHUMANO EZIHLOBANE
7 BOM ekhasini 13
Ama-LED angama-5.2
Ithebula elilandelayo lichaza izixhumi ezikhona ebhodini le-StellarLINK.
Ithebula 6. Ama-LED
| Isixhumi | Incazelo | Isikhundla |
| D1 | I-LED yokusetha kabusha isistimu eqondisiwe | Uhlangothi oluphezulu D4 |
| D2 | Umsebenzisi we-LED | Uhlangothi oluphezulu D4 |
| D3 | I-IO ye-Target's voltage LED | Uhlangothi oluphezulu D4 |
| D4 | I-UART Rx LED | Uhlangothi oluphezulu lwe-A1 |
| D5 | I-UART Tx LED | Uhlangothi oluphezulu lwe-A1 |
| D6 | Amandla ku-LED | Uhlangothi oluphezulu lwe-A2 |
IZIXHUMANO EZIHLOBANE
6 Ukuhlelwa kabushaview ekhasini 11
7 BOM ekhasini 13
5.3 Abagxumi
Ithebula elilandelayo lichaza ama-jumpers akhona ebhodini le-StellarLINK.
Ithebula 7. Ama-Jumpers
| Isixhumi | Incazelo | Inani elizenzakalelayo | Isikhundla |
| JP1 | Ukumiswa kwesignali eqondiwe ye-TRSTN • 1-2: Ixhumeke ku-10K ohm pullup resistor • 1-3: Ixhumeke ku-TRST evela ku-FTDI • 2-3: Ixhumeke ku-GND |
1-3 | Uhlangothi oluphezulu lwe-A3 |
IZIXHUMANO EZIHLOBANE
6 Ukuhlelwa kabushaview ekhasini 11
7 BOM ekhasini 13
Isakhiwo phezuview
BOM
Ithebula 8. BOM
| # | Into | Qty | Inani | Inketho yokukhweza | Incazelo | Unyathela |
| 1 | C1, C3, C7, C8, C9, C10, C11, C12, C13, C14, C15, C17, C19, C21, C22, C23, C24, C25 | 18 | 100nF | I-Capacitor X7R – 0603 | 0603C | |
| 2 | C2, C4 | 2 | 10μF | I-Capacitor X7R – 0603 | 0603C | |
| 3 | C5, C6 | 2 | 12pF | I-C0G ceramic multilayer capacitor | 0603C | |
| 4 | C16, C18, C20 | 3 | 4m7 | I-Capacitor X7R – 0603 | 0603C | |
| 5 | CN1 | 1 | Unhlokweni 7X2 wesifazane | Unhlokweni, 7-Pini, irowu ekabili (6+2.5+10mm) | C_EDGE7X2_254 | |
| 6 | CN2 | 1 | Ungagcwalisi | Isixhumi sikanhlokweni, i-PCB Mount, okwakamuva, abathintwayo abangu-3, iphinikhodi, iphimbo elingu-0.1, ukuphela komsila we-pc | I-STP3X1 | |
| 7 | CN3 | 1 | I-ARM20 | Conn Flat Male 20 pins, straight low profile | C_EDGE10X2_254 | |
| 8 | I-D1, D2, D3, D6 | 4 | I-KP-1608SGC | I-LED eluhlaza | I-LED_0603 | |
| 9 | D4 | 1 | I-KP-1608SGC | I-LED eluhlaza | I-LED_0603 | |
| 10 | D5 | 1 | I-KP-1608SGC | I-LED eluhlaza | I-LED_0603 | |
| 11 | JP1 | 1 | Unhlokweni 3×2 + jumper | I-Jumper 4×2.54_Ivaliwe_V | STP3X2_P50_JMP3W | |
| 12 | L1, L2, L3, L4 | 4 | 74279267 | Ubuhlalu beFerrite 0603 60Ohm 500mA | 0603 | |
| 13 | P1 | 1 | Imbobo ye-USB_B | I-USB-MINI_B | HRS_UX60SC-MB-5S8 | |
| 14 | R1, R11, R18, R21 | 4 | 0R | Ungagcwalisi | Idatha ye-0603 | 0603R |
| 15 | R2, R3 | 2 | 10R | Idatha ye-0603 | 0603R | |
| 16 | R4 | 1 | 1k | Idatha ye-0603 | 0603R | |
| 17 | R5 | 1 | 12k | Idatha ye-0603 | 0603R | |
| 18 | R6, R7 | 2 | Ifilimu ewugqinsi ye-Res 0603 470 ohm 1% 1/4W | 0603R | ||
| 19 | R8, R9, R14, R16, R17 | 5 | 4k7 | Idatha ye-0603 | 0603R | |
| 20 | R10 | 1 | 2k2 | Idatha ye-0603 | 0603R | |
| 21 | R12, R13, R15, R22 | 4 | 470 | Idatha ye-0603 | 0603R | |
| 22 | R19, R24 | 2 | 0R | Idatha ye-0603 | 0603R |
| # | Into | Qty | Inani | Inketho yokukhweza | Incazelo | Unyathela |
| 23 | R20, R23 | 2 | 10k | Idatha ye-0603 | 0603R | |
| 24 | SWJ1 | 1 | I-SAM8798-ND | Isixhumi sokususa iphutha 5×2 1.27mm | SAMTEC_FTSH-105-01-LD | |
| 25 | I-TP1 | 1 | 90120-0921 | Ungagcwalisi | Izihloko | TP |
| 26 | I-TP2 | 1 | 90120-0921 | Ungagcwalisi | Izihloko | TP |
| 27 | I-TVS1, TVS2, TVS3, TVS4, TVS5, TVS6, TVS7, TVS8, TVS9 | 9 | 5.0V | I-ESD suppressor WE- VE, Vdc=5.0V | I-SOD882T | |
| 28 | U1 | 1 | I-FT2232HL | I-FT2232HL | TQFP50P1000X1000X100-64N | |
| 29 | U2 | 1 | I-USBLC6-2P6 | Ukuvikelwa kwe-ESD | SOT666 | |
| 30 | U3 | 1 | Idatha ye-LD1117S33TR | Ukwehla okuphansi kwevolumu evumayotagumlawuli | SOT223 | |
| 31 | U4 | 1 | I-M93S46XS | 1K (x16) ibhasi le-serial microwire EEPROM enokuvikelwa kweBlock | SO-8 | |
| 32 | U5, U6, U7 | 3 | Idatha ye-SN74LVC2T45DCTR | I-Dual-Bit i-transceiver yamabhasi anezinto ezimbili | I-SM8 | |
| 33 | u8, u9 | 2 | Idatha ye-SN74LVC1T45DCK | I-Single-Bit i-transceiver yamabhasi anezinto ezimbili | SOT563 | |
| 34 | U8A, U9A | 2 | SC70-6 | |||
| 35 | X1 | 1 | 12 MHz | Amakristalu e-ECS 12MHz, CL 12,TOL +/-25 ppm, STAB +/-30 ppm,-40 +85 C,ESR 150O |
I-ECS-120-12-36-AGN-TR3 |
Ama-Schematics
Umlando wokubuyekeza
Ithebula 9. Umlando wokubuyekeza idokhumenti
| Usuku | Buyekeza | Izinguquko |
| 07-Nov-2022 | 1 | Ukukhishwa kokuqala. |
| 20-Feb-2023 | 2 | Izinga lokugcinwa kuyimfihlo lishintshile ukusuka kokukhawulelwe kuya emphakathini. |
ISAZISO ESIBALULEKILE – FUNDA NGOKUQAPHELA
I-STMicroelectronics NV nezinkampani ezingaphansi kwayo (“ST”) igodla ilungelo lokwenza izinguquko, ukulungisa, izithuthukisi, ukuguqulwa, nokuthuthukiswa kwemikhiqizo ye-ST kanye/noma kulo mbhalo nganoma yisiphi isikhathi ngaphandle kwesaziso. Abathengi kufanele bathole ulwazi lwakamuva olufanele ngemikhiqizo ye-ST ngaphambi kokufaka ama-oda. Imikhiqizo ye-ST ithengiswa ngokulandela imigomo nemibandela ye-ST yokuthengisa ekhona ngesikhathi sokuvunywa kwe-oda.
Abathengi banomthwalo wemfanelo kuphela ekukhetheni, ekukhethweni, nasekusetshenzisweni kwemikhiqizo ye-ST futhi i-ST ayithathi sikweletu sosizo lwesicelo noma idizayini yemikhiqizo yabathengi.
Ayikho ilayisensi, eshiwo noma eshiwoyo, kunoma yiliphi ilungelo lempahla yengqondo elinikezwa i-ST lapha.
Ukudayiswa kabusha kwemikhiqizo ye-ST nezinhlinzeko ezihlukile kulwazi olubekwe lapha kuzovala noma yisiphi isiqinisekiso esinikezwe i-ST salowo mkhiqizo. Ilogo ye-ST kanye ne-ST yizimpawu zokuthengisa ze-ST. Ukuze uthole ulwazi olwengeziwe mayelana nezimpawu zokuthengisa ze-ST, bheka ku www.st.com/trademarks. Wonke amanye amagama omkhiqizo noma wesevisi ayimpahla yabanikazi abafanele.
Ulwazi olukule dokhumenti luthatha indawo futhi luthatha indawo yolwazi olwalunikezwe ngaphambilini kunoma yiziphi izinguqulo zangaphambili zalo mbhalo.
© 2023 STMicroelectronics – Wonke amalungelo agodliwe
Amadokhumenti / Izinsiza
 |
I-ST StellarLINK Circuit Debugger Programmer [pdf] Incwadi Yomnikazi I-StellarLINK Circuit Debugger Programmer, StellarLINK, Circuit Debugger Programmer, Debugger Programmer, Programmer |
