I-LS XGF-SOEA Isilawuli Sengqondo Esihlelekayo

Lo mhlahlandlela wokufaka uhlinzeka ngolwazi olulula lomsebenzi wokulawula kwe-PLC. Sicela ufunde ngokucophelela leli phepha ledatha namamanyuwali ngaphambi kokusebenzisa imikhiqizo. Ikakhulukazi funda izinyathelo zokuphepha futhi uphathe imikhiqizo ngendlela efanele.

Izinyathelo Zokuphepha

Incazelo yesixwayiso nombhalo wokuxwayisa

ISEXWAYISO ikhombisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekufeni noma ekulimaleni okubi kakhulu.
ISEXWAYISO ikhombisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekulimaleni okuncane noma okulingene.
Ingase futhi isetshenziselwe ukuxwayisa ngemikhuba engaphephile.

ISEXWAYISO

1. Ungaxhumani namatheminali ngenkathi kusetshenziswa amandla.
2. Vikela umkhiqizo ekungenelweni yindaba yensimbi yangaphandle.
3. Ungalisebenzisi kabi ibhethri(shaja, qaqa, ukushaya, mfushane, ukusoda).

ISEXWAYISO

1. Qiniseka ukuthi ubheka ivolumu elinganisiwetage kanye nokuhlelwa kwetheminali ngaphambi kokufakwa kwezintambo.
2. Uma ufaka izintambo, qinisa isikulufu sebhulokhi yetheminali ngobubanzi betorque obushiwo.
3. Ungafaki izinto ezivuthayo endaweni ezungezile.
4. Ungayisebenzisi i-PLC endaweni yokudlidliza okuqondile.
5. Ngaphandle kwabasebenzi besevisi abangochwepheshe, ungawuhlakazi noma ulungise noma uguqule umkhiqizo.
6. Sebenzisa i-PLC endaweni ehlangabezana nemininingwane evamile equkethwe kule datha yedatha.
7. Qiniseka ukuthi umthwalo wangaphandle awudluli isilinganiso semodyuli yokukhipha.
8. Lapho ulahla i-PLC nebhethri, kuphathe njengodoti wezimboni.

Indawo yokusebenza

Ukuze ufake, bheka izimo ezingezansi.

Cha	Into	Ukucaciswa					Okujwayelekile
1	I-Ambient temp.	0 ~ 55℃					–
2	Izinga lokushisa lesitoreji.	-25 ~ 70℃					–
3	Umswakama we-ambient	5 ~ 95%RH, ayinciphisi					–
4	Umswakama wesitoreji	5 ~ 95%RH, ayinciphisi					–
5	Ukumelana Nokudlidliza	Ukudlidliza ngezikhathi ezithile				–	–
		Imvamisa	Ukusheshisa				I-IEC 61131-2
		5≤f<8.4㎐	–		3.5 mm	Izikhathi eziyi-10 ohlangothini ngalunye lwe X kanye no-Z
		8.4≤f≤150㎐	9.8㎨(1g)		–
		Ukudlidliza okuqhubekayo
		Imvamisa	Imvamisa	Imvamisa
		5≤f<8.4㎐	–	1.75 mm
		8.4≤f≤150㎐	4.9㎨(0.5g)	–

Isoftware Yokusekela Esebenzayo

Ngokucushwa kwesistimu, inguqulo elandelayo iyadingeka.

1. I-XGI CPU: V3.8 noma ngaphezulu
2. I-XGK CPU: V4.2 noma ngaphezulu
3. I-XGR CPU: V2.5 noma ngaphezulu
4. Isofthiwe ye-XG5000: V3.68 noma ngaphezulu

Igama lezingxenye kanye nobukhulu (mm)

Lena ingxenye engaphambili ye-CPU. Bheka igama ngalinye uma ushayela isistimu. Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.

Ukufaka / Ukukhipha Amamojula

Lapha kuchaza indlela yokunamathisela umkhiqizo ngamunye kusisekelo noma ukuwususa.
Ifaka imojuli

1. Shelelezisa ingxenye engaphezulu yemojuli ukuze ulungise kusisekelo, bese uyilinganisa kusisekelo ngokusebenzisa isikulufu esigxilile semojuli.
2. Donsa ingxenye engenhla yemojuli ukuze uhlole ukuthi ifakwe esisekelweni ngokuphelele.

Ikhipha imojuli

1. Khulula izikulufu ezigxilile zengxenye engenhla yemojuli ukusuka kusisekelo.
2. Bamba imojuli ngezandla zombili bese ucindezela ihuku engaguquki yemojuli kahle.
3. Ngokucindezela ihuku, donsa ingxenye engenhla yemojula ukusuka eksisi yengxenye engezansi yemojuli.
4. Ngokuphakamisa imojula phezulu, susa ukuqagela okungaguquki kwemojuli emgodini wokulungisa.

Imininingwane Yokusebenza

Izicaciso zokusebenza zimi kanje.

Into	Ukucaciswa
Amandla enkumbulo	1Mbhithi
Isikhathi somcimbi	Isikhathi sangaphakathi: Isikhathi se-PLC Isikhathi sangaphandle: Isikhathi seseva yesikhathi sangaphandle
Ukulungiswa(ukunemba)	Isikhathi sangaphakathi: 1ms(ukunemba: ±2ms) Isikhathi sangaphandle: 1ms(ukunemba: ±0.5ms)
Iphoyinti lokungenayo	32 amaphuzu(Vumelanisa/uhlobo lomthombo)
Imisebenzi eyengeziwe	32 amaphuzu okokufaka Vuliwe/Valiwe isimo U-device display
Inombolo enkulu. kothintana nabo	512points(16module)

Izintambo

Isexwayiso sezintambo

1. Ungabeki ulayini wamandla we-AC eduze kolayini wesignali wokufaka wangaphandle wemojuli. Kufanele ibe kude kunobuncane obungu-100mm phakathi kwemigqa yomibili ukuze ingaphazanyiswa umsindo nezizibuthe.
2. Ikhebuli izokhethwa ngokucabangela ngokufanele izinga lokushisa le-ambient namandla avumelekile, ubukhulu bayo bungekho ngaphansi kobukhulu. izinga lekhebula le-AWG22 (0.3㎟).
3. Ungayibeki ikhebula eduze kakhulu nedivayisi eshisayo nezinto ezisetshenziswayo noma ukuthintana ngqo nowoyela isikhathi eside, okuzodala umonakalo noma ukusebenza okungavamile ngenxa ye-short-circuit.
4. Hlola i-polarity lapho ufaka izintambo kutheminali.
5. Izintambo ezine-high-voltagUlayini we-e noma intambo kagesi ingase ikhiqize isithiyo esibangela ukusebenza okungavamile noma iphutha.
6. Sebenzisa ikhebuli ye-AWG24(0.3㎟) ngenhla esontekile futhi evikelekile lapho ukhuluma nge-RS-422 nge-IRIG-B.
7. Nquma ubuningi bekhebula. ubude nenodi ngokucaciswa kwe-Timeserver ye-RS-422(IRIG-B).
8. Uma indawo yesiginali ye-Timeserver ingahlukanisiwe, sebenzisa isihlukanisi se-RS-422 ngenxa yomsindo. Ukubambezeleka kwezokuthutha kwesihlukanisi kufanele kube phakathi kuka-100㎲.
9. Ungasebenzisi isihlukanisi esinomsebenzi wokuhlaziya isignali yedatha bese uyithumela.

Izintambo Example

1. Usayizi wekhebula ledivayisi ye-I/O ukhawulelwe ku-0.3~2 mm2 kodwa kuyanconywa ukuthi ukhethe usayizi(0.3 mm2) ongawusebenzisa kalula.
2. Sicela uhlukanise ulayini wesignali wokufaka emugqeni wesignali ophumayo..
3. Imigqa yesignali ye-I/O kufanele ibe nentambo engu-100mm nangaphezulu kude nevolthi ephezulutagi-e/high high current circuit cable.
4. Ikhebuli yesivikelo seqoqo kufanele isetshenziswe futhi uhlangothi lwe-PLC kufanele lumiswe ngaphandle kwalapho ikhebula lesifunda eliyinhloko nekhebula lamandla kungenakuhlukaniswa.
5. Uma ufaka izintambo zamapayipi, qiniseka ukuthi ugxilisa amapayipi ngokuqinile.
6. Ulayini ophumayo we-DC24V kufanele uhlukaniswe kukhebuli ye-AC110V noma ikhebula le-AC220V.

Iwaranti

• Isikhathi sewaranti yizinyanga ezingama-36 kusukela ngosuku lokukhiqiza.
• Ukuxilongwa kokuqala kwamaphutha kufanele kwenziwe ngumsebenzisi. Nokho, ngesicelo, i-LS ELECTRIC noma um(abamele) bayo bangenza lo msebenzi ngenkokhelo. Uma imbangela yephutha kutholakala ukuthi kuwumthwalo we-LS ELECTRIC, le sevisi izoba mahhala.
• Okukhishiwe kuwaranti
  1. Ukushintshwa kwezingxenye ezisebenzisekayo nezinomkhawulo wokuphila (isb. amalayidi, amafuse, ama-capacitor, amabhethri, ama-LCD, njll.)
  2. Ukwehluleka noma umonakalo odalwe izimo ezingafanele noma ukuphatha ngaphandle kwalezo ezishiwo kumanuwali yomsebenzisi
  3. Ukwehluleka okubangelwa izici zangaphandle ezingahlobene nomkhiqizo
  4. Ukwehluleka okudalwe izinguquko ngaphandle kwemvume ye-LS ELECTRIC
  5. Ukusetshenziswa komkhiqizo ngezindlela ezingahlosiwe
  6. Ukwehluleka okungenakubikezelwa/ukuxazululwa ngobuchwepheshe besayensi bamanje ngesikhathi sokukhiqiza
  7. Amanye amacala lapho i-LS ELECTRIC ingenacala
• Ukuze uthole ulwazi oluningiliziwe lwewaranti, sicela ubheke imanuwali yomsebenzisi.
• Okuqukethwe komhlahlandlela wokufaka kungashintsha ngaphandle kwesaziso sokuthuthukiswa kokusebenza komkhiqizo.

I-LS ELECTRIC Co., Ltd. www.ls-electric.com 10310000989 V4.5 (2024.06)
I-imeyili: automation@ls-electric.com

· Indlunkulu/Ihhovisi laseSeoul	Ucingo: 82-2-2034-4033,4888,4703
· Ihhovisi le-LS ELECTRIC Shanghai (China)	Ucingo: 86-21-5237-9977
· I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)	Ucingo: 86-510-6851-6666
· I-LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)	Ucingo: 84-93-631-4099
· I-LS ELECTRIC Middle East FZE (Dubai, UAE)	Ucingo: 971-4-886-5360
· I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands)	Ucingo: 31-20-654-1424
· I-LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)	Ucingo: 81-3-6268-8241
· I-LS ELECTRIC America Inc. (Chicago, USA)	Ucingo: 1-800-891-2941

• Imboni: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea

Amadokhumenti / Izinsiza

I-LS XGF-SOEA Isilawuli Sengqondo Esihlelekayo [pdf] Umhlahlandlela wokufaka XGF-SOEA Programmable Logic Controller, XGF-SOEA, Programmable Logic Controller, Logic Controller, Controller

Izithenjwa

• Imaniwali yosebenzisayo