I-LS XBM-DN32H Isilawuli Sengqondo Esihlelekayo
Imininingwane Yomkhiqizo
- C/N: 10310001549
- Umkhiqizo: Isilawuli Sengqondo Ehlelekayo – XGB CPU (Modular)
- Amamojula Ahambisanayo: XBM-DN32H, XBM/XEM-DR14H2, XBM/XEM-DN/DP16/32H2, XBM/XEM-DN/DP32HP
- Ubukhulu: 6mm x 6mm x 6mm
- Izimo zokusebenza: Ibanga lokushisa -55°C kuya ku-70°C, Umswakamo 5%RH kuya ku-95%RH
Imiyalo yokusetshenziswa komkhiqizo
- Qinisekisa ukuthi iyunithi ye-PLC ivaliwe ngaphambi kokufakwa.
- Xhuma amamojula ahambisanayo (XBM-DN32H, XBM/XEM-DR14H2, XBM/XEM-DN/DP16/32H2, XBM/XEM-DN/DP32HP) njengoba kudingeka.
- Faka ngokuphephile iyunithi ye-PLC endaweni efanelekile ulandela imihlahlandlela yomkhiqizi.
Ukucushwa
- Xhuma ikhebula le-USB-301A ku-PLC ukuze wenze izinhlelo.
- Sebenzisa izesekeli ze-C40HH-SB-XB ne-XTB-40H(TG7-1H40S) ukuze uthole ukusebenza okwengeziwe okunamamojula ahambisanayo.
Ukusebenza
Qinisekisa ukuthi konke ukuxhumana kuvikelekile futhi i-PLC ivuliwe. Gada izinkomba zesimo ukuze uthole ukusebenza okufanele.
Isondlo
Njalo hlola iyunithi ye-PLC ukuze uthole noma yiziphi izimpawu zokulimala noma ukuguga.
Gcina iyunithi ihlanzekile futhi ingenakho ukunqwabelana kothuli.
Imibuzo Evame Ukubuzwa (FAQ)
Q: Lithini izinga lokushisa elisebenzayo le-PLC?A: Izinga lokushisa elisebenzayo lingu -55°C kuya ku-70°C.
Lo mhlahlandlela wokufaka uhlinzeka ngolwazi olulula lomsebenzi wokulawula kwe-PLC. Sicela ufunde ngokucophelela leli phepha ledatha namamanyuwali ngaphambi kokusebenzisa imikhiqizo. Ikakhulukazi funda izinyathelo zokuphepha futhi uphathe imikhiqizo ngendlela efanele.
Izinyathelo Zokuphepha
Incazelo yesixwayiso nombhalo wokuxwayisa
ISEXWAYISO
ISEXWAYISO sibonisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekufeni noma ekulimaleni okubi kakhulu.
ISEXWAYISO
UKUQAPHELA kubonisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekulimaleni okuncane noma okulingene.
Ingase futhi isetshenziselwe ukuxwayisa ngemikhuba engaphephile.
ISEXWAYISO
- Ungaxhumani namatheminali ngenkathi kusetshenziswa amandla.
- Vikela umkhiqizo ekungenelweni yindaba yensimbi yangaphandle.
- Ungalisebenzisi ibhethri. (Shaja, qaqa, shaya, mfushane, hlanganisa)
ISEXWAYISO
- Qiniseka ukuthi ubheka ivolumu elinganisiwetage kanye nokuhlelwa kwetheminali ngaphambi kokufakwa kwezintambo.
- Uma ufaka izintambo, qinisa isikulufu sebhulokhi yetheminali ngobubanzi betorque obushiwo.
- Ungafaki izinto ezivuthayo endaweni ezungezile.
- Ungayisebenzisi i-PLC endaweni yokudlidliza okuqondile.
- Ngaphandle kwabasebenzi besevisi abangochwepheshe, ungawuhlakazi noma ulungise noma uguqule umkhiqizo.
- Sebenzisa i-PLC endaweni ehlangabezana nemininingwane evamile equkethwe kule datha yedatha.
- Qiniseka ukuthi umthwalo wangaphandle aweqi isilinganiso somkhiqizo ophumayo.
- Lapho ulahla i-PLC nebhethri, kuphathe njengodoti wezimboni.
Indawo yokusebenza
Ukuze ufake, bheka izimo ezingezansi.
| Cha | Into | Ukucaciswa | Okujwayelekile | ||||
| 1 | I-Ambient temp. | 0 ~ 55℃ | – | ||||
| 2 | Izinga lokushisa lesitoreji. | -25 ~ 70℃ | – | ||||
| 3 | Umswakama we-ambient | 5 ~ 95%RH, ayinciphisi | – | ||||
| 4 | Umswakama wesitoreji | 5 ~ 95%RH, ayinciphisi | – | ||||
| 5 | Ukumelana Nokudlidliza | Ukudlidliza ngezikhathi ezithile | – | – | |||
| Imvamisa | Ukusheshisa | Ampukufunda | Izikhathi | I-IEC 61131-2 | |||
| 5≤f<8.4㎐ | – | 3.5 mm | Izikhathi eziyi-10 ohlangothini ngalunye lwe-X, Y, Z | ||||
| 8.4≤f≤150㎐ | 9.8㎨(1g) | – | |||||
| Ukudlidliza okuqhubekayo | |||||||
| Imvamisa | Ukusheshisa | Ampukufunda | |||||
| 5≤f<8.4㎐ | – | 1.75 mm | |||||
| 8.4≤f≤150㎐ | 4.9㎨(0.5g) | – | |||||
Imininingwane Yokusebenza
Ithebula elilandelayo libonisa ukucaciswa okuvamile kwe-XGB. Ukuze uthole ulwazi olwengeziwe, sicela ubheke kumanuwali yomsebenzisi.
Imininingwane Ejwayelekile
| Izinto | Imininingwane |
| Indlela yokusebenza | Ukusebenza okuphindaphindayo, ukusebenza komjikelezo ongaguquki,
Ukuphazamisa ukusebenza, ukuskena kwenkathi njalo |
| Indlela yokulawula ye-I/O | Ukucubungula iqoqo ngokuskena kanyekanye (Indlela yokuvuselela),
Iqondiswa yiziyalezo zohlelo |
| Isivinini sokucubungula
(Iziyalezo eziyisisekelo) |
Uhlobo lwe-XBM-H: 83ns/step, XBM/XEM-H2/HP uhlobo:
40ns/isinyathelo |
| Umthamo wememori yohlelo(MK) | H uhlobo: 20Kstep, H2/HP Uhlobo: 64Ksteps |
| Umthamo wememori yohlelo(IEC) | H2/HP uhlobo: 384Kbyte |
| Ukwandiswa okuphezulu stages | Main + Ukunwetshwa 7slot
(Ukuxhumana: max 2slot, High speed I/F: max 2 slot) |
| Imodi yokusebenza | GIJIMA, MISA, LUNGISA |
| Umsebenzi wokuzihlola | Ukubambezeleka kokusebenza, inkumbulo engavamile, i-I/O engavamile |
| Imbobo yohlelo | I-USB(1Ch) |
| Indlela yokwenza ikhophi yasenqolobaneni | Ukusetha indawo ye-latch kupharamitha eyisisekelo |
| I-RTC | Isebenza izinsuku eziyi-183(25℃), lapho amandla ecishiwe ngemva kokushaja(3.0V) |
| Umsebenzi owakhelwe ngaphakathi | I-Cnet(RS-232, RS-485), i-Enet, i-PID, i-High-speed counter Positioning:
|
Isoftware Yokusekela Esebenzayo
Ngokucushwa kwesistimu, inguqulo elandelayo iyadingeka.
- Isoftware ye-XG5000
- XBM-DN32H, XBM-DN/DP32H2, XBM-DN/DP32HP: V4.22 noma ngaphezulu
- XEM-DN/DP32H2, XEM-DN/DP32HP: V4.26 noma ngaphezulu
- XBM/XEM-DN/DP16H2, XBM/XEM-DR14H2: V4.75 noma ngaphezulu
- O / S
- I-XBM-DN32H: O/S V1.0 noma ngaphezulu
- XBM-DN/DP32H2, XBM-DN/DP32HP: O/S V2.0 noma ngaphezulu
- XEM-DN/DP32H2, XEM-DN/DP32HP: O/S V2.1 noma ngaphezulu
- XBM/XEM-DN/DP16H2, XBM/XEM-DR14H2: O/S V3.0 noma ngaphezulu
Izesekeli kanye Nemininingwane Yekhebula
Hlola ingxenye ephaketheni.
- I-XGB-POWER(3P) : Ikhebuli yamandla yokuxhuma i-24V
Hlola insiza. Ithenge, uma kudingeka.
- I-USB-301A: Ikhebuli yokuxhuma (yokulanda) nge-USB
- C40HH- □ □SB-XBI : XBM/XEM-DN/DP32H/H2/HP Main unit input/output connection
- I-XTB-40H(TG7-1H40S) :XBM/XEM-DN/DP32H/H2/HP Iyunithi eyinhloko yokufaka/okukhiphayo Ibhulokhi yesikhumulo
Igama lezingxenye kanye nobukhulu (mm)
Lena ingxenye engaphambili ye-CPU. Bheka igama ngalinye uma ushayela isistimu. Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.
I-LED yenkomba yokokufaka/ yokuphumayo- Okokufaka/ Isixhumi esiphumayo
- Isixhumi sokuxhuma esakhelwe ngaphakathi i-RS-232/485
- Isixhumi samandla
- Isixhumi sokuxhuma esakhelwe ngaphakathi se-Enet
- Imodi S/W, Ikhava ye-USB
- I-LED yesikhombi sesimo
- I-RS-485Termination Resistor Switch
Ukufaka / Ukukhipha Amamojula
Lapha kuchaza indlela yokunamathisela nokukhipha umkhiqizo ngamunye.
- Ifaka imojuli
- Susa ikhava Yesandiso ngakwesokudla-ngezansi komkhiqizo.
- Phusha umkhiqizo bese uwuxhuma ekuhambisaneni ne-Hook ukuze kulungiswe imiphetho emine kanye ne-Hook ukuze ixhumeke ezansi.
- Ngemuva kokuxhuma, cindezela i-Hook ukuze ilungiswe futhi uyilungise ngokuphelele.
- Ikhipha imojuli
- Phusha i-Hook ukuze ixhumeke bese ukhipha umkhiqizo ngezandla ezimbili. (Ungawukhiphi umkhiqizo ngamandla.)
Ukucaciswa kwamandla
Lapha kuchaza ukucaciswa kwamandla kwe-XGB. Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.
| Izinto | Ukucaciswa | |
|
Ukucaciswa Kwamandla |
Kulinganiswe ngo-voltage | I-DC24V |
| Okokufaka ivoltagibanga | DC20.4~28.8V (-15%, +20%) | |
| Okokufaka kwamanje | I-1A (Typ.550㎃) | |
| Kuvunyelwe ukuhluleka kwamandla kwesikhashana | Ngaphansi kuka-1㎳ | |
Iwaranti
- Isikhathi sewaranti yizinyanga ezingama-36 kusukela ngosuku lokukhiqiza.
- Ukuxilongwa kokuqala kwamaphutha kufanele kwenziwe ngumsebenzisi. Nokho, ngesicelo, i-LSELECTRIC noma um(abamele) bayo bangenza lo msebenzi ngenkokhelo. Uma imbangela yephutha itholakala kuwumthwalo we-LS ELECTRIC, le sevisi izoba mahhala.
Okukhishiwe kuwaranti
- Ukushintshwa kwezingxenye ezisebenzisekayo nezinomkhawulo wokuphila (isb. amalayidi, amafuse, ama-capacitor, amabhethri, ama-LCD, njll.)
- Ukwehluleka noma umonakalo odalwe izimo ezingafanele noma ukuphatha ngaphandle kwalezo ezishiwo encwadini yomsebenzisi
- Ukwehluleka okubangelwa izici zangaphandle ezingahlobene nomkhiqizo
- Ukwehluleka okudalwe izinguquko ngaphandle kwemvume ye-LS ELECTRIC
- Ukusetshenziswa komkhiqizo ngezindlela ezingahlosiwe
- Ukwehluleka okungenakubikezelwa/ukuxazululwa ngobuchwepheshe besayensi bamanje ngesikhathi sokukhiqiza
- Ukwehluleka ngenxa yezinto zangaphandle ezifana nomlilo, ivolumu engavamiletage, noma izinhlekelele zemvelo
- Amanye amacala lapho i-LS ELECTRIC ingenacala
- Ukuze uthole ulwazi oluningiliziwe lwewaranti, sicela ubheke imanuwali yomsebenzisi.
- Okuqukethwe komhlahlandlela wokufaka kungashintsha ngaphandle kwesaziso sokuthuthukiswa kokusebenza komkhiqizo.
I-LS ELECTRIC Co., Ltd. www.ls-electric.com 10310001549 V5.8 (2024.06)
I-imeyili: automation@ls-electric.com
- Indlunkulu/Ihhovisi laseSeoul
Ucingo: 82-2-2034-4033,4888,4703 - Ihhovisi le-LS ELECTRIC Shanghai (China)
Ucingo: 86-21-5237-9977 - I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)
Ucingo: 86-510-6851-6666 - I-LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)
Ucingo: 84-93-631-4099 - I-LS ELECTRIC Middle East FZE (Dubai, UAE)
Ucingo: 971-4-886-5360 - I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands)
Ucingo: 31-20-654-1424 - I-LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)
Ucingo: 81-3-6268-8241 - I-LS ELECTRIC America Inc. (Chicago, USA)
Ucingo: 1-800-891-2941 - Imboni: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea
Amadokhumenti / Izinsiza
 |
I-LS XBM-DN32H Isilawuli Sengqondo Esihlelekayo [pdf] Umhlahlandlela wokufaka XBM-DN32H Programmable Logic Controller, XBM-DN32H, Programmable Logic Controller, Logic Controller, Controller |
