Okuqukethwe fihla
1 I-LS XBF-PD02A Isilawuli Sengqondo Esihlelekayo
2 Ulwazi Lomkhiqizo
3 Imiyalo yokusetshenziswa komkhiqizo
4 imibuzo ejwayelekile ukubuzwa
5 Izinyathelo Zokuphepha
6 Indawo yokusebenza
7 Isoftware Yokusekela Esebenzayo
8 Igama lezingxenye kanye nobukhulu (mm)
9 Ukufaka / Ukukhipha Amamojula
10 Ukucaciswa kokusebenza
11 Izintambo
12 Iwaranti
13 Amadokhumenti / Izinsiza
13.1 Izithenjwa

I-LS-logo

I-LS XBF-PD02A Isilawuli Sengqondo Esihlelekayo

I-LS-XBF-PD02A-Programmable-Logic-Controller-product

Ulwazi Lomkhiqizo

Imininingwane:

  • C/N: 10310001005
  • Umkhiqizo: Isilawuli Se-Logic Ehlelekayo - I-XGB Positioning
  • Imodeli: XBF-PD02A

Imiyalo yokusetshenziswa komkhiqizo

Ukufakwa:

Landela lezi zinyathelo ukuze ufake i-Programmable Logic Controller (PLC) XGB Positioning XBF-PD02A:

  1. Qinisekisa ukuthi amandla avaliwe ngaphambi kokufaka.
  2. Faka i-PLC ngokuphephile endaweni efanele.
  3. Xhuma izintambo ezidingekayo ngokomdwebo wezintambo onikeziwe.

Ukuhlela:

Ukuhlela i-PLC yokubeka imisebenzi:

  1. Finyelela kusixhumi esibonakalayo sokuhlela ulandela imiyalelo yesandla yomsebenzisi.
  2. Chaza amapharamitha wokuma njengebanga, isivinini, nokusheshisa.
  3. Hlola uhlelo ukuze uqinisekise ukusebenza okulungile.

Ukusebenza:

Ukusebenzisa i-PLC XBF-PD02A:

  1. Faka amandla ku-PLC futhi uqinisekise ukuthi isesimweni esilungile.
  2. Faka imiyalo yokumisa oyifunayo ngokusebenzisa isixhumi esibonakalayo sokulawula.
  3. Gada inqubo yokumisa futhi wenze izinguquko njengoba kudingeka.

imibuzo ejwayelekile ukubuzwa

  • Q: Lithini izinga lokushisa lokusebenza le-XBF-PD02A?
    • A: Izinga lokushisa elisebenzayo lingu-25°C kuya ku-70°C.
  • Q: Ingabe i-XBF-PD02A ingasetshenziswa ezindaweni ezinomswakama?
    • A: Yebo, i-XBF-PD02A ingasebenza ezindaweni ezinamaleveli womswakamo ofika ku-95% RH.

XGB Positioning

  • I-XBF-PD02A

Lo mhlahlandlela wokufaka uhlinzeka ngolwazi olulula lomsebenzi wokulawula kwe-PLC. Sicela ufunde ngokucophelela leli phepha ledatha namamanyuwali ngaphambi kokusebenzisa imikhiqizo. Ikakhulukazi funda izinyathelo zokuphepha futhi uphathe imikhiqizo ngendlela efanele

Izinyathelo Zokuphepha

Incazelo yesixwayiso nombhalo wokuxwayisa

  • I-LS-XBF-PD02A-Programmable-Logic-Controller-fig (2)ISEXWAYISO sibonisa isimo esingaba yingozi, uma singagwenywa, esingaholela ekufeni noma ekulimaleni okubi kakhulu
  • I-LS-XBF-PD02A-Programmable-Logic-Controller-fig (2)UKUQAPHELA kubonisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekulimaleni okuncane noma okulingene. Ingase futhi isetshenziselwe ukuxwayisa ngemikhuba engaphephile

ISEXWAYISO

  1. Ungaxhumani namatheminali ngenkathi kusetshenziswa amandla.
  2. Vikela umkhiqizo ekungenelweni yindaba yensimbi yangaphandle.
  3. Ungalisebenzisi kabi ibhethri(shaja, qaqa, ukushaya, mfushane, ukusoda).

ISEXWAYISO

  1. Qiniseka ukuthi ubheka ivolumu elinganisiwetage kanye nokuhlelwa kwetheminali ngaphambi kokufakwa kwezintambo.
  2. Lapho ufaka izintambo, qinisa isikulufu sebhulokhi yetheminali ngobubanzi betorque obushiwo.
  3. Ungafaki izinto ezivuthayo endaweni ezungezile.
  4. Ungayisebenzisi i-PLC endaweni yokudlidliza okuqondile.
  5. Ngaphandle kwabasebenzi besevisi abangochwepheshe, Ungawuhlakazi noma ulungise noma uguqule umkhiqizo.
  6. Sebenzisa i-PLC endaweni ehlangabezana nemininingwane evamile equkethwe kule datha yedatha.
  7. Qiniseka ukuthi umthwalo wangaphandle aweqi isilinganiso semojuli yokuphumayo.
  8. Lapho ulahla i-PLC nebhethri, kuphathe njengodoti wezimboni

Indawo yokusebenza

Ukuze ufake, bheka izimo ezingezansi.

Cha Into Ukucaciswa Okujwayelekile
1 I-Ambient temp. 0 ~ 55℃ –
2 Izinga lokushisa lesitoreji. -25 ~ 70℃ –
3 Umswakama we-ambient 5 ~ 95%RH, ayinciphisi –
4 Umswakama wesitoreji 5 ~ 95%RH, ayinciphisi –
 

 

 

 

5

  

 

 

Ukumelana Nokudlidliza

 Ukudlidliza ngezikhathi ezithile – –
Imvamisa Ukusheshisa Ampukufunda Izikhathi  

 

 

I-IEC 61131-2
5≤f<8.4㎐ – 3.5 mm Izikhathi eziyi-10 ohlangothini ngalunye lwe

X kanye no-Z
8.4≤f≤150㎐ 9.8㎨(1g) –
Ukudlidliza okuqhubekayo
Imvamisa Imvamisa Ampukufunda
5≤f<8.4㎐ – 1.75 mm
8.4≤f≤150㎐ 4.9㎨(0.5g) –

Isoftware Yokusekela Esebenzayo

Ngokucushwa kwesistimu, inguqulo elandelayo iyadingeka.

  1. Uhlobo lwe-XBC: V1.8 noma ngaphezulu
  2. Uhlobo lwe-XEC: V1.2 noma ngaphezulu
  3. Uhlobo lwe-XBM: V3.0 noma ngaphezulu
  4. Isofthiwe ye-XG5000 : V3.1 noma ngaphezulu

Igama lezingxenye kanye nobukhulu (mm)

Lena ingxenye engaphambili yeMojuli. Bheka igama ngalinye uma ushayela isistimu. Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.I-LS-XBF-PD02A-Programmable-Logic-Controller-fig (3)

Ukufaka / Ukukhipha Amamojula

Lapha kuchaza indlela yokufaka umkhiqizo ngamunye umkhiqizo ngamunye.

  1. Ifaka imojuli
    1. Susa ikhava yesandiso emkhiqizweni.
    2. Phusha umkhiqizo bese uwuxhuma ngokuvumelana nehhuku ukuze kulungiswe imiphetho emine kanye nehhuku ukuze kuxhunywe ngezansi.
    3. Ngemuva kokuxhumeka, cindezela i-hook ukuze ilungiswe futhi uyilungise ngokuphelele.
  2. Ikhipha imojuli
    1. Phusha ihhuku ukuze unqanyulwe, bese ususa umkhiqizo ngezandla ezimbili. (Ungawususi umkhiqizo ngenkani)I-LS-XBF-PD02A-Programmable-Logic-Controller-fig (4)

Ukucaciswa kokusebenza

Izicaciso zokusebenza zimi kanje

Uhlobo Imininingwane
Inombolo ye-eksisi yokulawula 2
Indlela yokulawula Ukulawula isikhundla, Ukulawula isivinini, Ukulawula isivinini/Isikhundla,

Ukulawula isikhundla/Isivinini
Ukuxhumana Imbobo ye-RS-232C noma i-USB yeyunithi eyisisekelo
Yenza isipele Igcina ipharamitha, idatha yokusebenza kumemori ye-flash

Izintambo

Isexwayiso sezintambo

  1. Ungavumeli ulayini wamandla we-AC eduze kolayini wesignali wokufaka wemojula ye-analog yangaphandle. Uma kuqhelelene nebanga elanele phakathi kwazo, ngeke kusaba nokwanda noma umsindo ongenisayo.
  2. Ikhebula lizokhethwa ngokucabangela izinga lokushisa le-ambient kanye namandla avumelekile. Okungaphezulu kwe-AWG22 (0.3㎟) kuyanconywa.
  3. Ungavumeli ikhebula lisondele kakhulu kudivayisi eshisayo nezinto ezibonakalayo noma ukuthintana ngqo nowoyela isikhathi eside, okuzodala umonakalo noma ukusebenza okungavamile ngenxa ye-short-circuit.
  4. Hlola i-polarity lapho ufaka izintambo kutheminali.
  5. Izintambo ezine-high-voltagUlayini we-e noma intambo kagesi ingase ikhiqize isithiyo esibangela ukusebenza okungavamile noma iphutha.
  6. Nika amandla isiteshi ofuna ukusisebenzisa.

Ukuxhuma exampLes

  1. Isixhumi esibonakalayo nesingaphandle
    Into Iphini No. Isiginali Imojula yesikhombisi-ndlela yangaphandle
    X Y
    Umsebenzi we-eksisi ngayinye B20 I-MPG A+ Okokufaka kwe-Manual pulse generator Encoder A+ ß
    A20 MPG A- Ijeneretha ye-pulse manual Encoder A- input ß
    B19 I-MPG B+ Ijeneretha ye-pulse manual Encoder B+

    okokufaka

    		 ß
    A19 MPG B- Ijeneretha ye-pulse manual Encoder B- input ß
    A18 B18 I-FP+ Ukuphuma kwe-Pulse (umehluko +) à
    A17 B17 FP- Ukuphuma kwe-Pulse (umehluko -) à
    A16 B16 I-RP+ Uphawu lwe-Pulse (umehluko +) à
    A15 B15 RP- Uphawu lwe-Pulse (umehluko -) à
    A14 B14 0V+ Umkhawulo ophakeme ß
    A13 B13 0V- Umkhawulo Ophansi ß
    A12 B12 INJA INJA ß
    A11 B11 NC Ayisetshenziswa  
    A10 B10
    A9 B9 COM Okujwayelekile(OV+,OV-,DOG) ⇔
    A8 B8 NC Ayisetshenziswa  
    A7 B7 I-INP Isignali yendawo ß
    A6 B6 I-INP COM I-DR/INP isignali evamile ⇔
    A5 B5 I-CLR Ukuchezuka kwesibali esicacile à
    A4 B4 I-CLR COM I-Deviation counter isignali ecacile evamile ⇔
    A3 B3 IKHAYA +5V Isignali yomsuka (+5V) ß
    A2 B2 EKHAYA COM Isignali yomsuka (+5V) Evamile ⇔
    A1 B1 NC Ayisetshenziswa  
  2. Isixhumi esibonakalayo uma usebenzisa ibhodi yokuxhumanisa ye-I/O
    Izintambo zingaba lula ngokuxhuma ibhodi yokuxhumanisa ye-I/O nesixhumi se-I/O uma usebenzisa imojula yokumisa ye-XGB
    Lapho ufaka imojula ye-XGB yokubeka izintambo ngokusebenzisa i-TG7-1H40S(I/O ilinki) kanye ne-C40HH-10SB-XBI(I/O isixhumi), ukuhlobana phakathi kwetheminali ngayinye ye-I/O link board kanye ne-I/O yemojula yokuma uyalandela.I-LS-XBF-PD02A-Programmable-Logic-Controller-fig (5)

Iwaranti

  • Isikhathi sewaranti yizinyanga ezingama-36 kusukela ngosuku lokukhiqiza.
  • Ukuxilongwa kokuqala kwamaphutha kufanele kwenziwe ngumsebenzisi. Nokho, ngesicelo, i-LS ELECTRIC noma um(abamele) bayo bangenza lo msebenzi ngenkokhelo. Uma imbangela yephutha kutholakala ukuthi kuwumthwalo we-LS ELECTRIC, le sevisi izoba mahhala.
  • Okukhishiwe kuwaranti
    1. Ukushintshwa kwezingxenye ezisebenzisekayo nezinomkhawulo wokuphila (isb. amalayidi, amafuse, ama-capacitor, amabhethri, ama-LCD, njll.)
    2. Ukwehluleka noma umonakalo odalwe izimo ezingafanele noma ukuphatha ngaphandle kwalezo ezishiwo kumanuwali yomsebenzisi
    3. Ukwehluleka okubangelwa izici zangaphandle ezingahlobene nomkhiqizo
    4. Ukwehluleka okudalwe izinguquko ngaphandle kwemvume ye-LS ELECTRIC
    5. Ukusetshenziswa komkhiqizo ngezindlela ezingahlosiwe
    6. Ukwehluleka okungenakubikezelwa/ukuxazululwa ngobuchwepheshe besayensi bamanje ngesikhathi sokukhiqiza
    7. Ukwehluleka ngenxa yezinto zangaphandle ezifana nomlilo, ivolumu engavamiletage, noma izinhlekelele zemvelo
    8. Amanye amacala lapho i-LS ELECTRIC ingenacala
  • Ukuze uthole ulwazi oluningiliziwe lwewaranti, sicela ubheke imanuwali yomsebenzisi.
  • Okuqukethwe komhlahlandlela wokufaka kungashintsha ngaphandle kwesaziso sokuthuthukiswa kokusebenza komkhiqizo.

I-LS ELECTRIC Co., Ltd. www.ls-electric.com 10310001005 V4.5 (2024.06)

  • I-imeyili: automation@ls-electric.com
  • Indlunkulu/Seoul Office Ucingo: 82-2-2034-4033,4888,4703
  • Ihhovisi le-LS ELECTRIC Shanghai (China) Ucingo: 86-21-5237-9977
  • I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Ucingo: 86-510-6851-6666
  • I-LS ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Ucingo: 84-93-631-4099
  • I-LS ELECTRIC Middle East FZE (Dubai, UAE) Ucingo: 971-4-886-5360
  • I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands) Ucingo: 31-20-654-1424
  • I-LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Ucingo: 81-3-6268-8241
  • I-LS ELECTRIC America Inc. (Chicago, USA)Tel: 1-800-891-2941
  • Imboni: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnam-do, 31226, Korea

I-LS-XBF-PD02A-Programmable-Logic-Controller-fig (1)

Amadokhumenti / Izinsiza

I-LS XBF-PD02A Isilawuli Sengqondo Esihlelekayo [pdf] Umhlahlandlela wokufaka
XBF-PD02A Programmable Logic Controller, XBF-PD02A, Programmable Logic Controller, Logic Controller, Controller

Izithenjwa

Shiya amazwana

Ikheli lakho le-imeyili ngeke lishicilelwe. Izinkambu ezidingekayo zimakiwe *