I-Programmable Logic ControllerSmart I/O Pnet
C/N: 10310000542
Umhlahlandlela WokufakaGPL-DV4C/DC4C
10310000542
Lo mhlahlandlela wokufaka uhlinzeka ngolwazi olulula lomsebenzi noma ukulawula kwe-PLC. Sicela ufunde ngokucophelela leli phepha ledatha namamanyuwali ngaphambi kokusebenzisa imikhiqizo. Ikakhulukazi funda izinyathelo zokuphepha bese uphatha imikhiqizo ngendlela efanele.
Izinyathelo Zokuphepha
■ Incazelo yesixwayiso nelebula lesexwayiso
ISEXWAYISO sibonisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekufeni noma ekulimaleni okubi kakhulu
UKUQAPHELA kubonisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekulimaleni okuncane noma okulingene. Ingase futhi isetshenziselwe ukuxwayisa ngemikhuba engaphephile
ISEXWAYISO
① Ungaxhumani namatheminali ngenkathi kusetshenziswa amandla.
② Qiniseka ukuthi azikho izindaba zensimbi zangaphandle.
③ Ungalisebenzisi kabi ibhethri(shaja, qaqa, ukushaya, mfushane, ukusoda).
ISEXWAYISO
① Qiniseka ukuthi uhlola ivolumu elinganiselwetage kanye nokuhlelwa kwetheminali ngaphambi kokufakwa kwezintambo
② Uma ufaka izintambo, qinisa isikulufu sebhulokhi yetheminali ngebanga letorque elishiwo
③ Ungafaki izinto ezivuthayo endaweni ezungezile
④ Ungasebenzisi i-PLC endaweni yokudlidliza okuqondile
⑤ Ngaphandle kwabasebenzi besevisi abangochwepheshe, ungawuhlakazi noma ulungise noma uguqule umkhiqizo
⑥ Sebenzisa i-PLC endaweni ehlangabezana nemininingwane evamile equkethwe kule datha yedatha.
⑦ Qiniseka ukuthi umthwalo wangaphandle aweqi isilinganiso semojula yokuphumayo.
⑧ Lapho ulahla i-PLC nebhethri, kuphathe njengodoti wezimboni.
⑨ Isiginali ye-I/O noma ulayini wokuxhumana uzoxhunywa okungenani i-100mm kude ne-highvoltagikhebula le-e noma ulayini wamandla.
Indawo yokusebenza
■ Ukufaka, bheka izimo ezingezansi.
| Cha | Into | Ukucaciswa | Okujwayelekile | |||
| 1 | I-Ambient temp. | 0 ~ 55℃ | – | |||
| 2 | Izinga lokushisa lesitoreji. | -25 ~ 70℃ | – | |||
| 3 | Umswakama we-ambient | 5 ~ 95%RH, ayinciphisi | – | |||
| 4 | Umswakama wesitoreji | 5 ~ 95%RH, ayinciphisi | – | |||
| 5 | Ukumelana Nokudlidliza | Ukudlidliza ngezikhathi ezithile | – | – | ||
| Imvamisa | Ukusheshisa | I-IEC 61131-2 | ||||
| 5≤f<8.4㎐ | – | 3.5 mm | Izikhathi ezingu-10 ohlangothini ngalunye ku-X, Y, Z | |||
| 8.4≤f≤150㎐ | 9.8㎨(1g) | – | ||||
| Ukudlidliza okuqhubekayo | ||||||
| Imvamisa | Imvamisa | Imvamisa | ||||
| 5≤f<8.4㎐ | – | 1.75 mm | ||||
| 8.4≤f≤150㎐ | 4.9㎨(0.5g) | – | ||||
Izesekeli kanye Nemininingwane Yekhebula
■ Hlola i-Profibus Connector equkethwe ebhokisini
- Ukusetshenziswa: I-Profibus Communication Connector
- Into : GPL-CON
■ Uma usebenzisa ukuxhumana kwe-Pnet, ikhebula elisontekile elivikelekile kufanele lisetshenziswe ngokucabangela ibanga nesivinini sokuxhumana.
- Umkhiqizi : I-Belden noma umenzi wezinto ezifanayo ezicacisiwe ngezansi
- Ukucaciswa kwekhebula
| Ukwahlukanisa | Incazelo | |
| AWG | 22 |  |
| Uhlobo | I-BC (Ithusi Elingenalutho) | |
| I-Insulation | I-PE (i-Polyethylene) | |
| Ububanzi(intshi) | 0.035 | |
| Isihlangu | I-Aluminium Foil-Polyester, Tape/Braid Shield | |
| Umthamo(pF/ft) | 8.5 | |
| I-impedance yesici(Ω) | awu 150Ω | |
Ubukhulu (mm)
■ Lena ingxenye engaphambili yomkhiqizo. Bheka igama ngalinye uma usebenzisa uhlelo. Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.
■ Imininingwane ye-LED
| Igama | Incazelo |
| GIJIMA | Ibonisa isimo samandla |
| I-RDY | Ibonisa isimo sokuxhumana se-Comm. Imojuli |
| IPHUTHA | Ibonisa iphutha elingavamile le-comm.. module |
Ukucaciswa kokusebenza kwe-Analog
■ Lokhu ukucaciswa kokusebenza kwe-analog komkhiqizo. Bheka igama ngalinye uma ushayela isistimu. Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.
| Into | I-GPL-DV4C (Voltage okukhiphayo) | I-GPL-DC4C (Okukhiphayo kwamanje) | ||
| Amashaneli okukhiphayo e-analogi | 4 amashaneli | |||
| Okokufaka kwe-analog | 1 ~ 5V | 0 ~ 4000 | 4 ~ 20mA | 0 ~ 8000 |
| 0 ~ 5V | ||||
| 0 ~ 10V | 0 ~ 8000 | 0 ~ 20mA | ||
| -10 ~ 10V | -8000-8000 | |||
| Isixazululo | 1 ~ 5V | I-1.250mV | 4 ~ 20mA | 2.5µA |
| 0 ~ 5V | ||||
| 0 ~ 10V | 0 ~ 20mA | |||
| -10 ~ 10V | ||||
| Ukunemba(Isimo se-Ambient.) | ±0.3% noma ngaphansi | ±0.4% noma ngaphansi | ||
| Isivinini sokuguqulwa | 10ms/module + Isikhathi sokubuyekeza | |||
| Ubuningi obuphelele. okokufaka | ±15V | ± 25mA | ||
| Izinto zokuvala umoya indlela | Ukufakwa kwesithombe esihlangene phakathi kwetheminali yokufaka namandla e-PLC (akukho ukwahlukanisa phakathi kwamashaneli) | |||
| Itheminali ixhunyiwe | Itheminali enamaphuzu angama-38 | |||
| Okusetshenziswayo kwangaphakathi | I-DC24V, 210mA | I-DC24V, 240mA | ||
| Isisindo | 314g | 322g | ||
Isakhiwo se-Terminal Block se-I/O Wiring
■ Lesi yisakhiwo sebhulokhi yetheminali yezintambo ze-I/O. Bheka igama ngalinye uma ushayela isistimu.
Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.
Izintambo
■ Isakhiwo sesixhumi nendlela yokufaka izintambo
- Umugqa wokufaka: umugqa oluhlaza uxhumeke ku-A1, umugqa obomvu uxhumeke ku-B1
- Umugqa wokukhiphayo: umugqa oluhlaza uxhumeke ku-A2, umugqa obomvu uxhumeke ku-B2
- Xhuma isihlangu ku-clamp yesihlangu
- Uma ufaka isixhumi kutheminali, faka ikhebula ku-A1, B1
- Ukuze uthole ulwazi olwengeziwe mayelana nezintambo, bheka imanuwali yomsebenzisi.
Iwaranti
■ Isikhathi sewaranti yizinyanga ezingama-36 kusukela ngosuku lokukhiqiza.
■ Ukuxilongwa kokuqala kwamaphutha kufanele kwenziwe ngumsebenzisi. Nokho, ngesicelo, i-LS
I-ELECTRIC noma ummeleli wayo angakwazi ukwenza lo msebenzi ngenkokhelo. Uma imbangela yephutha
okutholwe kuwumthwalo we-LS ELECTRIC, le sevisi izoba mahhala.
■ Okungafakwa ewarantini
- Ukushintshwa kwezingxenye ezisebenzisekayo nezinomkhawulo wokuphila (isb. amalayidi, amafuse, ama-capacitor, amabhethri, ama-LCD, njll.)
- Ukwehluleka noma umonakalo odalwe izimo ezingafanele noma ukuphatha ngaphandle kwalezo ezishiwo kumanuwali yomsebenzisi
- Ukwehluleka okubangelwa izici zangaphandle ezingahlobene nomkhiqizo
- Ukwehluleka okudalwe izinguquko ngaphandle kwemvume ye-LS ELECTRIC
- Ukusetshenziswa komkhiqizo ngezindlela ezingahlosiwe
- Ukwehluleka okungenakubikezelwa/ukuxazululwa ngobuchwepheshe besayensi bamanje ngesikhathi sokukhiqiza
- Ukwehluleka ngenxa yezinto zangaphandle ezifana nomlilo, ivolumu engavamiletage, noma izinhlekelele zemvelo
- Amanye amacala lapho i-LS ELECTRIC ingenacala
■ Ukuze uthole ulwazi oluningiliziwe lwewaranti, sicela ubheke imanuwali yomsebenzisi.
■ Okuqukethwe yigayidi yokufaka kungashintsha ngaphandle kwesaziso sokuthuthukiswa kokusebenza komkhiqizo.
I-LS ELECTRIC Co., Ltd. www.ls-electric.com 10310000542 V4.5 (2024.6)
• I-imeyili: automation@ls-electric.com
| • Indlunkulu/Ihhovisi laseSeoul • Ihhovisi le-LS ELECTRIC Shanghai (China) • I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) • I-LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) • I-LS ELECTRIC Middle East FZE (Dubai, UAE) • I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands) • I-LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) • I-LS ELECTRIC America Inc. (Chicago, USA) |
Ucingo: 82-2-2034-4033,4888,4703 Ucingo: 86-21-5237-9977 Ucingo: 86-510-6851-6666 Ucingo: 84-93-631-4099 Ucingo: 971-4-886-5360 Ucingo: 31-20-654-1424 Ucingo: 81-3-6268-8241 Ucingo: 1-800-891-2941 |
• Imboni: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea
Amadokhumenti / Izinsiza
 |
I-LS GPL-DV4C Isilawuli Sengqondo Esihlelekayo [pdf] Umhlahlandlela wokufaka I-GPL-DV4C Programmable Logic Controller, GPL-DV4C, Programmable Logic Controller, Logic Controller, Controller |