75F 7X-SN-C4X-X Xhuma Imojuli

ISINGENISO

Sethula i-Connect Module! Lesi silawuli seyunithi esinamandla sinikeza ukuhlanganiswa okungenamthungo nezinzwa ze-OWI ukukusiza ukuqapha kalula indawo yebhilidi lakho. Ngekhono le-BACnet ne-Modbus, i-Connect Module iqinisekisa ukuhambisana nezinye izinhlelo. Isibonisi esisebhodini senza izinhlelo zibe lula, futhi nekhono lokunika amandla nokuxhumana ne-HyperStat Lite, uzoba nokulawula okuphelele kumasistimu akho ophahleni.

OKUQUKETHWE IPHAKEJI

• Xhuma Imojuli
• Izikulufu zokuzishaya
• Umhlahlandlela wokufaka.

IMICIMBI

• Amandla
  • I-24V AC / DC
• Izinga lokushisa lokusebenza
  • Indawo yokusebenza: -4°F (-20°C) – 122°F (50°C)
• Ukuvikelwa
  • Ukuvikelwa: IP 20, NEMA Type 1
  • Ibanga lokungcola: 2
  • Isitifiketi: ROHS
• Okokufaka kanye Nemiphumela
  • (8) Okokufaka Okujwayelekile, (4) 0-10v noma 4-20ma imiphumela ye-analog, (8) Idlulisela 24V AC/DC, 1A ilinganiselwe, 1.77″ 240*128-pixel RGB TFT ukubonisa.
• Ukuxhumana
  • 3-wire sensor bus for daisy-chained sensor communication and low-power 3V DC. 4-wire RS-485 interface. BACnet support is coming soon.
• Ukukhweza
  • Iqinile odongeni usebenzisa izikulufu ezizithephayo noma isiqeshana se-DIN (ezizohlelwa ngokuhlukana).
• Izinga lokushisa lesitoreji
  • -4°F (-20°C) ukuya ku-122 °F(125°C)

IZINYATHELO ZOKUZIVIKELA

• Faka ngokwawo wonke amakhodi kagesi wesifunda nawendawo.
• Ungakhwezi idivayisi ezindaweni eziveza idivayisi ezintweni ezingaba ngaphezu kwamazinga okushisa okusebenza.
• Do not mount directly in sunlight or any heating source.

UKUKHUBUKA

1. Connect Module can be installed either on a DIN rail or directly to a Wall using the bracket (to be ordered separately). To lock the DIN clip to the Connect Module, use the screws provided (item-3, Fig-1a) to the back of the Connect Module. The DIN clip is spring-loaded and would snap onto the DIN rail. To fix it to the wall bracket, use the screws provided (item-1, Fig-1b).
   1. Xhuma Imojuli
   2. Isiqeshana se-DIN
   3. Screws to lock the DIN clip
   4. Isitimela se-DIN
      • Umfanekiso 1b
        1. Izikulufu zokukhweza
        2. Xhuma Imojuli
        3. Ukubeka phezulu ubakaki
2. To wire the Connect module, remove the insulation of the cable for about 7mm (little over ¼ of an inch) lift the flap, insert the wire and push the flap down. Try pulling the wire out to make sure its firmly snapped in place. Refer the image to understand better.
3. Ukuze ususe intambo, phakamisa iflephu phezulu bese ukhipha ucingo.
4. Ukuze ususe imojuli yokuxhuma kumzila we-DIN, bamba imojuli yokuxhuma ngokuqinile bese uyidonsela phezulu. Lokhu kuzobangela ukuthi intwasahlobo inwetshwe futhi imojuli ye-Connect ingahlukaniswa nojantshi we-DIN.

UKUSEKELA KWEZOBUCHWEPHESHE

• Ukufakwa okwenziwa ochwepheshe/onjiniyela abangagunyaziwe kuzovala iwaranti.
• For more information on wiring, commissioning, or usage of 75F products, please refer to any documentation provided with the job. If no documentation was provided with the job, please use the 75F Help Center (support.75f.io), where you can find application-specific wiring schematics and helpful user guides, and videos.
• Uma udinga ulwazi olwengeziwe, sicela uvakashele support.75f.io kumavidiyo okufundisa, imihlahlandlela yokufaka, nokunye. Futhi ungashayela ku- +1 888 612 7575 (USA) noma ku-1800 121 4575 (INDIA) uma udinga ukwesekwa kobuchwepheshe.

FCC

Isitatimende sokuthobela i-FCC (USA)

Izitatimende zokuthobela: Le divayisi ithobela Ingxenye 15 Yemithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:

1. Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi.
2. Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.

Izitatimende Zesexwayiso:

• Noma yiziphi izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa lesi sisetshenziswa.
• Lo mshini kufanele ufakwe futhi usebenze ngebanga elincane elingama-20 cm phakathi kwe-radiator nomzimba wakho.

Isitatimende sokuthobela i-Industrial Canada (IC).

Compliance Statements: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) This device may not cause interference, 2) This device must accept any interference, including interference that may cause undesired operation of the device.

Izitatimende Zesexwayiso:

• Lokhu okokusebenza kuthobelana nemikhawulo yokuchayeka kwefrikhwensi yomsakazo ebekwe yi-Industrial Cananda yendawo engalawuleki.
• Le mishini kufanele ifakwe futhi isebenze ngebanga elincane elingu-20 cm phakathi kocingo nomsebenzisi noma ababukeli.

ULWAZI KUMSEBENZISI

Kumadivayisi edijithali Ekilasi A kanye Nesigaba B, ulwazi kumsebenzisi luyadingeka ukuze lufake izitatimende ezilandelayo (Isigaba 15.105): Edivayisini yedijithali Yekilasi A noma i-peripheral, imiyalelo enikezwe umsebenzisi izobandakanya isitatimende esilandelayo noma esifanayo, esibekwe ku indawo evelele embhalweni webhukwana:

QAPHELA: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali yekilasi A, ngokususelwe engxenyeni 15 yeMithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi lapho okokusebenza kusebenza endaweni yezohwebo. Lesi sixhobo sikhiqiza, sisebenzise, ​​futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nebhukwana lemiyalo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Ukusebenza kwalesi sisetshenziswa endaweni okuhlalwa kuyo kungase kubangele ukuphazamiseka okuyingozi lapho umsebenzisi kuyodingeka ukuthi alungise ukuphazamiseka ngezindleko zakhe.

Kudivayisi yedijithali Yekilasi B noma i-peripheral, imiyalelo enikezwe umsebenzisi izofaka isitatimende esilandelayo noma esifanayo, esibekwe endaweni evelele embhalweni webhukwana:

QAPHELA: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobelana nemikhawulo yedivayisi yedijithali Yekilasi B, ngokususelwe engxenyeni 15 yeMithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lesi sixhobo sikhiqiza, sisebenzise futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nemiyalelo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:

• Hlela kabusha noma hambisa uthi olwamukelayo.
• Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
• Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
• Xhumana nomthengisi noma uchwepheshe werediyo/TV onesipiliyoni ukuze uthole usizo.

ULWAZI OLUNINGI

• Support.75f.io
• +1 888 612 7575 (USA)
• 18001214575 (India) Doc

Imibuzo Evame Ukubuzwa

• Q: Ngingalutholaphi ulwazi olwengeziwe mayelana nezintambo, ukuthunywa, noma ukusetshenziswa kwemikhiqizo ye-75F?
  • A: For more information, refer to any documentation provided with the job. If no documentation was provided, visit the 75F Help Center at support.75f.io for application-specific wiring schematics, user guides, and videos.
• Q: Ngingaluthola kanjani usizo lobuchwepheshe lomkhiqizo?
  • A: Vakashela support.75f.io for instructional videos, installation guides, and more. You can also call +1 888 612 7575 (USA) or 1800 121 4575 (India) for technical support.
• Q: Yiziphi izitatimende zokuthobela i-FCC ne-Industry Canada zalo mkhiqizo?
  • A: The device complies with Part 15 of the FCC Rules and Industry Canada (IC) Compliance Statement. Operation is subject to specific conditions outlined in the compliance statements.

Amadokhumenti / Izinsiza

75F 7X-SN-C4X-X Xhuma Imojuli [pdf] Umhlahlandlela wokufaka 75F, Igama Lomkhiqizo Xhuma Imojuli, Imodeli Izinombolo 7X-SN-C4X-X, 7X-SN-C4X-X Xhuma Imojula, 7X-SN-C4X-X, Xhuma Imojula, Imojula

Izithenjwa

• Imaniwali yosebenzisayo