I-SMARTEH LPC-2.DX1 Longo Isilawuli Esihlelekayo

Imininingwane

• Igama Lomkhiqizo: I-Longo Programmable Controller LPC-2.DX1 Relay Module
• Inguqulo: 2
• Umkhiqizi: SMARTEH doo
• I-Operating Voltage: 100 - 240 V AC
• Okukhiphayo: Dlulisela okukhiphayo kwedijithali nge-make contacts (CHA)
• Izici: Ukuvikelwa kwamanje kwe-Inrush, okukhiphayo okuhlukanisiwe kwe-galvanic, inkomba yesignali ye-LED, ukutholwa kwesimo se-fuse
• Ukukhweza: Ukukhwezwa kwesitimela okujwayelekile kwe-DIN EN50022-35

FAQ

Q: Ingabe imojula ye-LPC-2.DX1 ingasetshenziswa kukho kokubili imithwalo ye-inductive ne-capacitive?

A: Yebo, imojula ye-LPC-2.DX1 ifanele ukusetshenziswa nayo yomibili imithwalo eguquguqukayo nenamandla njengezibonisi, osonkontileka, namamotho.

Q: Isebenza kanjani imojula ye-LPC-2.DX1?

A: Imojula ye-LPC-2.DX1 inikwa amandla kusuka kumojula eyinhloko (isb, LPC-2.MU1, LPC-2.MC9) ngebhasi langaphakathi Elingakwesokudla.

Q: Iluphi uhlobo lokukhweza olusekelwa yimojula ye-LPC-2.DX1?

A: Imojula ye-LPC-2.DX1 isekela ukukhwezwa kwesitimela okujwayelekile kwe-DIN EN50022-35 ukuze kufakwe kalula.

Ibhalwe ngu-SMARTEH doo
Copyright © 2024, SMARTEH doo
Imaniwali yosebenzisayo
Inguqulo Yombhalo: 2
Meyi, 2024

ISEXWAYISO

• AMAZINGA NEZINHLELO: Amazinga, izincomo, imithethonqubo kanye nezinhlinzeko zezwe lapho imishini izosebenza khona, kufanele kubhekwe ngenkathi kuhlelwa futhi kumiswa imishini kagesi. Sebenza ku-100 .. Inethiwekhi ye-240 V AC ivunyelwe kubasebenzi abagunyaziwe kuphela.
• IZIXWAYISO ZENGOZI: Amadivayisi noma amamojula kufanele avikelwe kumswakama, ukungcola kanye nokulimala ngesikhathi sokuthutha, ukugcinwa kanye nokusebenza.
• IMIBANDELA YESIQINISEKISO: Kuwo wonke amamojula we-LONGO LPC-2 - uma kungekho ukuguqulwa okwenziwa kuwo futhi kuxhunywe kahle ngabasebenzi abagunyaziwe - kucatshangelwa amandla amakhulu okuxhuma avunyelwe, iwaranti yezinyanga ezingama-24 iyasebenza kusukela osukwini lokudayiswa kuya kumthengi wokugcina, kodwa kungakapheli izinyanga ezingama-36 ngemuva kokulethwa kwaSmarteh. Uma kwenzeka izimangalo zingakapheli isikhathi sewaranti, ezisekelwe ekungasebenzini kahle kwempahla umkhiqizi unikeza ukushintshwa kwamahhala. Indlela yokubuyisela imojuli engasebenzi kahle, kanye nencazelo, ingahlelwa nommeleli wethu ogunyaziwe. Iwaranti ayibandakanyi umonakalo ngenxa yezinto zokuhamba noma ngenxa yemithethonqubo ehambisanayo yezwe engacatshangelwa, lapho imojuli ifakiwe.
• Lolu cingo kufanele luxhunywe kahle ngohlelo loxhumano oluhlinzekiwe kule manuwali. Ukungaxhumani kahle kungaholela ekulimaleni kwedivayisi, umlilo noma ukulimala komuntu siqu.
• VoltagI-e ocingweni ingabangela ukushaqeka kukagesi futhi ingase ibangele ukulimala komuntu siqu noma ukufa.
• UNGALOKOTHI USEZE WENA LO Mkhiqizo!
• Lolu cingo akufanele lufakwe ezinhlelweni ezibalulekile empilweni (isb. izinto zezokwelapha, izindiza, njll.).
• Uma idivayisi isetshenziswa ngendlela engacaciswanga ngumkhiqizi, izinga lokuvikela elihlinzekwa okokusebenza lingase lonakaliswe.
• Izinto ezilahlwayo zikagesi neze-elekthronikhi (WEEE) kumele ziqoqwe ngokwehlukana!
• I-LONGO LPC-2 ithobelana nala mazinga alandelayo:
  • I-EMC: EN 61000-6-3:2007 + A1:2011, EN 61000-6-1:2007, EN 61000- 3- 2:2006 + A1:2009 + A2: 2009, EN 61000-3-3:2013
  • I-LVD: I-IEC 61010-1:2010 (3rd Ed.), IEC 61010-2-201:2013 (1st Ed.)
• I-Smarteh doo isebenzisa inqubomgomo yentuthuko eqhubekayo. Ngakho-ke sigodla ilungelo lokwenza izinguquko kanye nokwenza ngcono kunoma yimiphi imikhiqizo echazwe kuleli bhukwana ngaphandle kwesaziso sangaphambili.

UMENZI:
SMARTEH doo
I-Poljubinj 114
5220 Tolmin
I-Slovenia

IZIfinyezo

• DC I-Direct Current
• AC Iyashintshana Yamanje
• RX Yamukela
• TX Dlulisa
• UART I-Universal Asynchronous Receiver-Transmitter
• CHA Ngokujwayelekile Vula
• I-PLC Isilawuli Sengqondo Ehlelekayo

DESCRIPTION

I-LPC-2.DX1 iyimojula yokuphumayo edluliswayo enokuvikelwa kwamanje kwe-inrush kanye nokuphumayo okukodwa kwe-galvanic. Ingasetshenziswa ezinhlobonhlobo zokusebenza. Ilungele ukusetshenziswa nemithwalo ye-inductive noma ye-capacitive (isb. izibonisi, izinkontileka, izinjini).
I-LED ibonisa isignali esebenzayo ekhona ekuphumeni kwemojuli nesimo se-fuse.
I-LPC-2.DX1 ilawulwa futhi inikwa amandla kusuka kumojula eyinhloko (isb. LPC-2.MU1, LPC-2.MC9, …) ngebhasi langaphakathi elingakwesokudla.

IZICI

Ithebula 1: Idatha yobuchwepheshe

• Dlulisa okukhiphayo kwedijithali nge-make contacts (NO), i-inrush current limited, ihlukaniswe i-galvanic
• Isibonakaliso se-LED
• Ukutholwa kwe-fuse eshaywayo
• Ihlinzekwe ngemojuli eyinhloko
• Ubukhulu obuncane kanye nokukhwezwa kwesitimela okujwayelekile kwe-DIN EN50022-35

UKUSEBENZA

• Imojula ye-LPC-2.DX1 ingalawulwa kumojula ye-PLC eyinhloko (isb. LPC-2.MC9, LPC-2.MM1). Imingcele yemojuli ingafundwa noma ibhalwe nge-software ye-Smarteh IDE.
• Imojula ye-LPC-2.DX1 ingaphinda ilawulwe imojula eyinhloko yokukhiphayo ekude (isb. LPC-2.MU1).
• ISEXWAYISO: Uma kwenziwa kusebenze okukhiphayo, okwamanje kugeleza ku-thermistor ye-NTC, kukhawulelwe i-inrush current. Ngakho-ke, i-thermistor ye-NTC iyashisa ngesikhathi sokwenza kusebenze okukhiphayo. Ukuqinisekisa ukusebenza okuthembekile, isikhathi esiphakathi kwemijikelezo yokuphumayo kufanele sanele ukuvumela i-thermistor ye-NTC ukuthi iphole ngokuphelele.
• Ubuncane bokubambezeleka besikhathi obuchazwe yisoftware phakathi kokuvala okukhiphayo nokwenza kusebenze futhi kusethelwe kumasekhondi angama-20. Nokho, leli nani lokuphela kwesikhathi akuhloselwe ukuba libe umkhawulo omkhulu. Kusebenza njengesikhumbuzo sokucabangela izidingo zokupholisa ze-NTC thermistor lapho uklama umjikelezo wokusebenza wohlelo lwakho lokusebenza.
• Bheka igrafu yesikhathi efakiwe ukuze uthole ukumelwa okubonakalayo kokuphumayo kokuthimbezeleka NGOKU (toff) ngemva kokucisha idivayisi kanye nokulibaziseka kwe-ON (i-toff) phakathi kwemijikelezo yokuphumayo.
• Esimeni lapho izinga lokushisa elikalwe nge-NTC thermistor yokulinganisa lidlula u-80°C, okukhiphayo kuzovalwa.

Umfanekiso 2: Okukhiphayo-ukubambezeleka

Amapharamitha we-SmartehIDE

Okokufaka

Izinga lokushisa langaphakathi [DX1_x_ai_internal_temp]: Isilinganiso sokushisa sangaphakathi ku-PCB.

Uhlobo: I-UINT

Idatha eluhlaza kuya kobunjiniyela: 0 .. 65535 → 0 .. 655.35 °C

Isimo se-Fuse [DX1_x di_fuse_status]: Fuse isimo sokufakwayo kwedijithali.

Uhlobo: BOOL

• 0 → Ifuse ivuthelwe
• 1 → Fuse Kulungile

Okukhiphayo

Dlulisa okukhiphayo kwedijithali [DX1_x_do_out]: Dlulisa isimo sokuphuma kwedijithali.

Uhlobo: BOOL

Idatha ye-Raw to engineering:

• 0 → Okukhiphayo kwedijithali VULIWE
• 1 → Okukhiphayo kwedijithali VULIWE

UKUFAKA

Uhlelo lokuxhumana

Umfanekiso 3: Uhlelo lokuxhuma

Ithebula 2: IN

IN.3	L	Okokufaka kokuphakelwa kwamandla – ulayini, 100 .. 240 V AC, 50/60 Hz
IN.4	N	Okokufaka kokuphakelwa kwamandla – phakathi nendawo, 100 .. 240 V AC, 50/60 Hz
Ithebula 3: PHUMELA
OUT.1	L1	Okukhipha amandla - ulayini, 100 .. 240 V AC, 50/60 Hz
OUT.2	N1	Okukhipha amandla - phakathi nendawo, 100 .. 240 V AC, 50/60 Hz
Ithebula 4: I-Fuse
Fuse	I-4A (T-slow)	I-Cartridge fuse 5 × 20 mm
Ithebula 5: I-LED
I-LED: eluhlaza	Isimo se-LED	VULIWE: Okukhiphayo kuvuliwe futhi amandla ekuphumeni VALIWE: Okukhiphayo KUVALIWE futhi awekho amandla kokuphumayo Ukucwayiza: Akukho mandla okukhiphayo, i-fuse eshaywayo noma ayikho ivolthitage kokokufaka

Ithebula 6: K1
IBHASI langaphakathi	Idatha & DC amandla	Ukuxhuma kumojula ye-I/O
Ithebula 7: K2
IBHASI langaphakathi	Idatha & DC amandla	Ukuxhuma kumojula ye-I/O

Imiyalo yokukhweza

Umfanekiso 4: Ubukhulu bezindlu

Ubukhulu ngamamilimitha.

Konke ukuxhumeka, okunamathiselwe kwimojula nokuhlanganisa kufanele kwenziwe ngenkathi imojuli ingaxhumekile kumandla amakhulu.

Imiyalo yokukhweza:

1. Vala ugesi oyinhloko.
2. Imojula ye-Mount LPC-2.DX1 endaweni enikeziwe ngaphakathi kwephaneli kagesi (i-DIN EN50022-35 ukukhweza ujantshi).
3. Khipha amanye amamojula we-LPC-2 (uma kudingeka). Faka imojuli ngayinye kuloliwe we-DIN kuqala, bese unamathisela amamojula ndawonye ngezixhumi ze-K1 ne-K2.
4. Xhuma izintambo zokufaka nezikhiphayo ngokuya ngohlelo lokuxhuma kuMfanekiso 2.
5. VULA ukunikezwa kwamandla okukhulu.

Yehlisa ngohlelo lokuhlehla. Kumamojula okukhweza/okwehliswa ukuya/kusuka kuloliwe we-DIN isikhala samahhala okungenani semojula eyodwa kufanele sishiywe kuloliwe we-DIN.
QAPHELA: Imojula eyinhloko ye-LPC-2 kufanele inikwe amandla ngokuhlukana nezinye izinto zikagesi ezixhunywe ohlelweni lwe-LPC-2. Izintambo zesiginali kufanele zifakwe ngokuhlukene namandla kanye nevolumu ephezulutagizintambo ze-e ngokuhambisana nezinga elijwayelekile lokufakwa kukagesi embonini.

Umfanekiso 5: Imvume encane

Ukucaciswa okungenhla kufanele kucatshangelwe ngaphambi kokufakwa kwamamojula.

Umfanekiso 6: Ukushintshwa kwefuse

IMICIMBI YOBUCHWEPHESHE

• Ukunikezwa kwamandla Kusuka kumojula eyinhloko ngebhasi yangaphakathi
• Ubukhulu. ukusetshenziswa kwamandla 0.5 W
• Umthamo wokufaka okaliwetage 100 .. 240 V AC, 50/60 Hz
• Ukusebenza okuphezulu kwamanje 4 A
• SW-echazwe ubuncane besikhathi SOKUVALI1 20 imizuzwana
• I-Fuse 4 A (T-slow), 250 V, I-Cartridge fuse 5×20 mm
• Izixhumi zohlobo lwezikulufu zohlobo lokuxhuma zocingo oluxhumekile 0.75 kuya ku-2.5 mm2
• Ubukhulu (L x W x H) 90 x 18 x 60 mm
• Isisindo 70 g
• Ukushisa kwe-ambient 0 kuya ku-50 °C
• Ubukhulu bomswakama we-ambient. 95%, akukho ukufingqa
• Ukuphakama okuphezulu 2000 m
• Indawo yokukhweza iqondile
• Izinga lokushisa lokuthutha nelokugcina -20 kuya ku-60 °C
• Idigri yokungcola 2
• I-Overvoltage isigaba II
• Impahla kagesi Ikilasi II (ukufakwa kabili)
• Isigaba sokuvikela IP30

I-MODULE ILEBULA

Ilebula (sample):

XXX-N.ZZZ
P/N: AAABBBCCDDDEEE
S/N: SSS-RR-YYXXXXXXXXXXXX
D/C: WW/YY

Incazelo yelebula:

1. XXX-N.ZZZ – igama lomkhiqizo eliphelele.
   • XXX-N – Umndeni womkhiqizo
   • ZZZ - umkhiqizo
2. P/N: AAABBBCCDDDEEE – ingxenye yenombolo.
   • I-AAA - ikhodi ejwayelekile yomndeni womkhiqizo,
   • I-BBB - igama elifushane lomkhiqizo,
   • I-CCDDD - ikhodi yokulandelana,
   • I-CC - unyaka wokuvulwa kwekhodi,
   • I-DDD - ikhodi yokutholwa,
   • I-EEE – ikhodi yenguqulo (igcinelwe ukuthuthukiswa kwe-firmware ye-HW kanye/noma noma i-SW).
3. S/N: SSS-RR-YYXXXXXXXXX – inombolo yomkhiqizo.
   • I-SSS - igama lomkhiqizo elifushane,
   • RR – ikhodi yomsebenzisi (inqubo yokuhlola, isb. Smarteh umuntu xxx),
   • YY - unyaka,
     ◦ XXXXXXXXX – inombolo yesitaki yamanje.
4. D/C: WW/YY – ikhodi yosuku.
   • WW - isonto kanye
   • YY - unyaka wokukhiqiza.

Ongakukhetha

1. I-MAC
2. Izimpawu
3. WAMP
4. Okunye

IZINGUQUKO

Ithebula elilandelayo lichaza zonke izinguquko kudokhumenti.

Usuku	V.	Incazelo
10.05.24	1	Inguqulo yokuqala, ekhishwe njenge LPC-2.DX1 module UserManual.

Amadokhumenti / Izinsiza

I-SMARTEH LPC-2.DX1 Longo Isilawuli Esihlelekayo [pdf] Imaniwali yosebenzisayo LPC-2.DX1 Longo Programmable Controller, LPC-2.DX1, Longo Programmable Controller, Programmable Controller, Controller

Izithenjwa

• Imaniwali yosebenzisayo