microtech EL00W, EL00W-RAD Wired Exit Loop

Imininingwane

• Okokufaka Voltage: 12-24VDC
• Izixhumanisi zokudlulisa: NC/COM/NO
• Edluliselwe Izilinganiso Imininingwane: 1A
• Okwamanje: i-standby 20mA kanye ne-30mA esebenzayo

Ulwazi Lomkhiqizo

Uhlelo lwe-e-Loop Wired luklanyelwe amasayithi aphezulu okusebenza futhi luhlinzeka ngesixazululo esisheshayo nesilula sokufaka amaluphu afakwa ngentambo. Inikeza ukukhweza kwendawo, ukukhweza okuguquguqukayo, nezinketho zokufaka ezifihliwe zakho kokubili i-loop yemodi yobukhona nemodi yokuphuma.

Imiyalo yokusetshenziswa komkhiqizo

Izinyathelo zokufaka:

1. ISINYATHELO 1: Ukukhetha Indlela Yokufaka
   Khetha okokukhweza ngaphezulu, okokukhweza, noma ukufaka okufihliwe kweluphu.
2. ISINYATHELO 2: Ukufakwa
   • I-Surface Mount: Bolt isitayela sokukhweza ngaphezulu sibe ukhonkolo noma ingqikithi ibhoboze imbobo yokukhweza/esithekile. Gcwalisa isisekelo nge-Sikaflex, beka ucingo, vala nge-Sikaflex.
   • I-Flush Mount: Faka i-Sikaflex esisekelweni, cindezela i-e-loop embobeni kuze kube yilapho ishelela phezulu.
   • Kufihliwe: Faka emgodini bese umboza nge-driveway base material noma inhlaka.
3. ISINYATHELO 3: I-Wirin
   Faka ucingo kusilawuli sesango. I-e-loop izozilinganisa ngokuzenzakalelayo lapho inika amandla amandla.

Umdwebo wezintambo

• Mnyama - GND
• Okubomvu - 12-24VDC
• Okumhlophe - COM
• Okuluhlaza okwesibhakabhaka - NC
• Ophuzi - CHA

Imibuzo Evame Ukubuzwa (FAQ)v

• Umbuzo: Ingabe isistimu ye-e-Loop Wired ingasetshenziselwa kokubili imodi yobukhona kanye namalophu emodi yokuphuma?
  A: Yebo, isistimu isekela kokubili imodi yobukhona kanye namalophu emodi yokuphuma ngezinketho ezifanele zokufaka.
• Q: Kuyini ukusetshenziswa kwamanje kwesistimu ye-e-Loop Wired?
  A: Isistimu ine-standby current engu-20mA kanye ne-active current engu-30mA.

I-EL00W & EL00W-RAD Imininingwane

• Okokufaka Voltage: 12-24VDC
• Izixhumanisi Zokudlulisa: NC/COM/NO
• Izilinganiso Zothintana Nokudlulisa: 1A
• Okwamanje: i-standby engu-20mA kanye ne-30mA esebenzayo

Imiyalelo ye-e-Loop enezintambo

Ukufakwa ngezinyathelo ezi-3 ezilula
Okokuqala, khetha indlela yokufaka; ukukhweza okungaphezulu, i-flush mount noma efihliwe.

1. ISINYATHELO 1:
   Sika umugqa usuka ku-e-loop uye kusilawuli uzungeze u-15mm ukujula usebenzisa i-double blade, ngakho-ke i-grove ibanzi ngokwanele ukulingana nekhebuli yobubanzi obungu-4.1mm. Bolts isitayela sokukhweza ngaphezulu kukhonkolo usebenzisa izikulufu zikakhonkolo ezinikeziwe, noma umongo ubhoboze imbobo engu-70mm ububanzi x 25mm ukujula ukuze ukhweze i-flush, noma u-40mm ukushona ukuze ufihleke.
2. ISINYATHELO 2:
   Ukusebenzisa ingcina ye-Sikaflex enerabha gcwalisa isisekelo se-grove up 5mm bese ubeka ucingo endaweni bese wengeza ungqimba olungaphezulu lwe-Sikaflex ukuze uvale ngokugcwele ikhebula. Ukuze ukhweze i-flush sebenzisa i-Sikaflex esisekelweni ezindaweni eziningana zembobo ejulile engu-25mm, bese ucindezela phansi ku-e-loop ize icwebezelise phezulu. Okokufihliwe, vele uhlale emgodini bese umboza ngezinto eziyisisekelo ze-driveway noma i-resin.
3. ISINYATHELO 3:
   Faka ucingo kusilawuli sesango. Uma isinikwe amandla i-e-loop izozilinganisa ngokuzenzakalelayo futhi izolungela ukusetshenziswa.

INtaba Engaphezulu

Intaba eshisayo

Inothi Elifihliwe: Phuma kwilophu yemodi kuphela

I-Microteach Designs
enquiries@microtechdesigns.com.au
microtechdesigns.com.au

Amadokhumenti / Izinsiza

microtech EL00W, EL00W-RAD Wired Exit Loop [pdf] Umhlahlandlela wokufaka I-EL00W, EL00W-RAD, EL00W EL00W-RAD Iluphu yokuphuma enentambo, EL00W EL00W-RAD, iluphu yokuphuma enentambo, iluphu yokuphuma, iluphu

Izithenjwa

• Imaniwali yosebenzisayo