I-LS ELECTRIC DriveView9 Idatha yedivayisi
Imininingwane
- Imikhiqizo Esekelwa: ShayelaView9
- Izinqubo zokuxhumana: Modbus-TCP, Modbus-RTU, LS485
- Izindlela Zokuxhuma: RS485, USB-RS485, USB-RJ45
Ulwazi Lomkhiqizo
ShayelaView9 is a software designed to communicate with specific models of inverters. It supports various communication protocols such as Modbus-TCP, Modbus-RTU, and LS485. Different connection methods are required based on the model of the inverter.
Imiyalo yokusebenzisa
Ukuhlola Ukuhambisana
Before connecting DriveView9, ensure that your inverter model is compatible with the software. Refer to the compatibility table provided in the user manual to verify compatibility.
Uhlobo Lwezokuxhumana
ShayelaView9 supports three communication methods:
- Modbus-TCP: Industrial Ethernet Protocol
- Modbus-RTU: Standard protocol for equipment control
- LS485: Protocol specific to LSELECTRIC products
Ukusetha Uxhumano
To connect DriveView9:
- All models except M100 can be connected via RS485.
- iV5 requires a communication option (LS485/Modbus-RTU).
- For specific models like iS7, H100, S100, use USB-RJ45 cable for connection.
Convertor Cable
Refer to the provided convertor cables for connecting different models of inverters to DriveView9.
Applicable products of Driveview9
- ShayelaView7 is a software that was used before DriveView9. Shayelaview7 is only supported with older inverters. Even if it is a supported model, it is only available in a lower version of the OS environment, so be careful.
- If DriveView9 and Inverter cannot communicate with each other, check the table below to see if the OS version of the inverter is compatible with DriveView9, and use DriveView that supports the Inverter OS.
Communication type(protocol)
- ShayelaView9 supports three communication methods (Modbus-TCP, Modbus-RTU, LS485).
- I-Modbus-TCP: Industrial Ethernet Protocol Developed for Wide Area Network (WAN)
- I-Modbus-RTU : A standard protocol that is simple but can perform the functions necessary for equipment control and monitoring, and is released free of charge and widely used as a standard protocol.
- I-LS-485 : A dedicated protocol used only among LSELECTRIC products.
How to connect DriveView9
- All models except M100 can be connected by RS485. iV5 requires communication option (LS485/Modbus-RTU) The USB-RS485 uses a two-way signal converter. Connect the USB to the computer and wire the 485 line (+), (-) to the S+,S- on the inverter terminal.
- iS7, H100, S100
- Use the USB-RJ45 (USB to RS232 + RS232 to RJ45) cable. Connect the USB to the computer and the RJ45 to the keypad port.
- See “Creating a Cable to Connect to the RJ45 Port and RS232” on the back page.
Convertor cable
- After making the cable as shown below, connect it to the KPD of the inverter controller and the 232 terminal of the PC.
ShayelaView9 Incwadi Yomsebenzisi
- Run DriveView9 installed on your computer.
- If driveview9 is not installed on your computer, download the ‘DriveView9’ installation file from the LSELECTRIC webisiza (www.lselectric.co.kr) bese uyifake ku-PC yakho.
When DriveView9 runs, click [New] in the upper left corner or File > New Project in the menu.
Create a project name and inverter model, and set a directory to store the project files. also Select the product model and inverter version to connect to, and press OK. *For iS7, version 1.00 is the standard (quantitative) version.
Click Settings > Modbus-RTU > Modbus-RTU right-hand Settings > Check COM-01 Int485 St Number 1 Auto scanning port > Scan > OK > Connect
- Communication speed can be set at COM-03, initial value is 9600bps
- Uma usebenzisa
< this cable, Please set Baudrate 19200bps
Click Tools > Options
- ShayelaView9 is language-enabled. The languages are English and Korean in two ways.
- You can also select a theme color. The colors are Blue, Dark, and White.
Click ‘Parameter’ to read parameters from Drive.
Check the parameter items you want to read.
FAQ
Q: How do I install DriveView9 on my computer?
A: To install DriveView9, download the installation file from the LSELECTRIC webindawo bese ulandela imiyalelo yokufaka enikezwe kumanuwali yomsebenzisi.
Q: What should I do if DriveView9 and my inverter cannot communicate?
A: Check the compatibility table for DriveView9 and ensure that the OS version of your inverter is supported. Use the appropriate DriveView version that supports your inverter’s OS.
Amadokhumenti / Izinsiza
 |
I-LS ELECTRIC DriveView9 Idatha yedivayisi [pdf] Umhlahlandlela Womsebenzisi iP5A, Drive iH, iE5, iC5, iG5A, iS5, iV5, iV5L, iS7, C100, M100, G100, S100, H100, DriveView9 Device Database, Device Database, DriveView9 |