I-HySecurity SlideDriver II XTREME Drive Slide Gate Operator 

IZIQEPHU

• Isondo le-XtremeDrive
• I-XtremeDrive rack

I-hardware

• 1/4-20 x 5/8 kusikulufa sekhanda eliyisicaba
• 1/4-20 nati okunamathiselwe

(NGOKUZITHANDELA) IKHITHI YOKUFAKA MX002750

• Dlulisa i-punch
• Drill jig
• I-countersink drill bit

AMATHULUZI

• I-Hacksaw
• Ukubhola okungenantambo
• 1/4 ku-drill bit
• Isikulufayili se-Phillips-head
• Isando
• Izikhiya zesiteshi
• Umaka unomphela
• I-Blue Loctite

AMATHIPHU OKUHLELA ISIZA KANYE NEKUFAKA

• Ezindaweni zokubuyisela kabusha, i-rack ingafakwa kumzila we-flanged drive noma ku-standard grooved drive rail.
• I-rack inobukhulu obungu-0.4 ku-(10 mm) futhi igibela ngaphansi komzila wesitimela. Uzodinga ukuphakamisa isitimela sokushayela sibe ngu-0.25 siye ku-0.5 ku-(6 kuya ku-13 mm) eduze kwamasango aphakeme kanye nawo wonke umzila wesitimela sokushayela, ikakhulukazi uma u-opharetha enamasondo angu-8 ku-(200 mm).
• Shintshanisa isondo eliphansi ngesondo le-XtremeDrive. Isondo le-XtremeDrive alisetshenziswa phezulu kwesitimela sokushayela.
• Inzwa yomkhawulo okabili - hlola indawo yenzwa yomkhawulo okabili futhi wenze noma yiziphi izinguquko ezidingekayo.
• Nciphisa ama-spacers efulegi - izikhala ozikhethela zona ezitholakalayo ukuze kwandiswe imvume phakathi kwezinzwa ezilinganiselwe kanye nerack ye-XtremeDrive.

ISAZISO

I-drive rail akumele icwile phakathi nendawo noma izohlikihla ngokumelene nezinzwa ezilinganiselwe ezimbili.

ISEXWAYISO

Vala amandla ku-opharetha wesango futhi uthathe izinyathelo ezifanele zokugwema ukushaqeka kukagesi.

FAKA UHLELO lwe-XTREMEDRIVE

UKULUNGISELELA

1. Susa ikhava.
2. Setha iswishi yamandla ukuthi IVALI.
3. Unclamp amasondo okushayela.
   ISAZISOQiniseka ukuthi i-rack ye-XtremeDrive ihambisana kahle kuyo yonke inqubo yokufaka. Ukuqondanisa okungalungile kungadinga ukushintshwa kwesitimela sedrayivu noma kubangele ukusebenza kabi kwe-XtremeDrive.
   
   

   IMAKA, YIBA, KANYE NEZIMBOBO EZINGAQONGAYO

   Qaphela: Maka izimbobo zengxenye eyodwa yedrayivu ngesikhathi.

4. Maka izimbobo ezifakwayo.
   Ukusebenzisa ucezu lwe-XtremeDrive rack:
   a. Phezulu kwesitimela sokushayela, qondanisa i-XtremeDrive rack 3/8 in (10 mm) ukusuka ekugcineni kwesitimela sokushayela (endaweni evulekile/eseduze) futhi iqondaniswe nonqenqema lwefulethi lesitimela ukuya ku-opharetha.
   b. Ngomusa clamp indawo yokubeka i-XtremeDrive bese umaka izikhungo zembobo.
   c. Susa i-rack ye-XtremeDrive
   d. Bamba izindawo zembobo ezimakiwe nge-¼ in drill bit.
   Ukuze usebenzise ikhithi yokufaka yokuzikhethela (MX002750):
   a. Phezulu komzila wesitimela, qondanisa i-drill jig 1 ku-(25 mm) kusukela ekugcineni kwesitimela sokushayela (endaweni evulekile/ eseduze) namaphini onqenqema lwesitimela sokushayela ohlangothini lwethrekhi yokushayela.
   b. Clamp i-drill jig kumzila wesitimela futhi usebenzise i-center/ transfer punch ukumaka izikhungo zemigodi.
   c. Bamba izindawo zembobo ezimakiwe nge-¼ in drill bit.
   d. Susa i-drill jig.
5. Countersink imbobo ngayinye. Qinisekisa ukuthi usinki wokubala ujule ngokwanele ukuze amakhanda ayisikulufu ashaywe ngesitimela sokushayela.
   Qaphela: Ikhithi yokufaka (MX002750) ihlanganisa ibhithi likasinki elifanelekile.

   FAKA I-XTREMEDRIVE RACK

6. Qondanisa ucezu lokuqala lwerack ye-XtremeDrive nesethi yokuqala yezimbobo ezikhwezwayo kanye nendawo yokubeka ngaphansi komzila wedrayivu namazinyo erack abheke phansi.
   ISAZISO
   Qiniseka ukuthi irack ye-XtremeDrive ayishayi kunzwa yomkhawulo okabili.
7. Clamp i-rack ye-XtremeDrive isendaweni.
8. Engeza iconsi lelokha yentambo eluhlaza okwesibhakabhaka kusikulufu ngasinye ngaphambi kokuqinisa isikulufu, isitimela, irack XtremeDrive, namantongomane.
9. Faka izikulufu ezimbili zokuqala bese uqinisa nge-screwdriver ye-Phillipshead.
10. Uma kudingekile, shiya imbobo yesithathu yokukhweza ivuliwe futhi usebenzise ibhawodi lehlombe ukuze uqondanise isethi elandelayo yezimbobo zokukhweza i-XtremeDrive.
11. Phinda izinyathelo 4 kuye ku-10 ukuze ufake i-XtremeDrive rack kuwo wonke umzila wesitimela.
12. Ekupheleni kwe-drive rail, qiniseka ukuthi imbobo yokugcina iboshiwe futhi ushaye phansi usike noma iyiphi i-rack ye-XtremeDrive phezu kwe-drive rail.
    

    FAKA Isondo LE-XTREMEDRIVE

13. Susa izingalo ze-pivot.
14. Khipha isondo le-AdvanceDrive engalweni ye-pivot ephansi.
15. Faka isondo le-XtremeDrive.
    

    QEDA UKUFAKA UHLELO lwe-XTREMEDRIVE

16. Faka izingalo ze-pivot.
17. Clamp amasondo okushayela.
18. Lungisa intwasahlobo yokuminyanisa ibe yi-2 in (50 mm).
19. Setha iswishi yamandla ukuthi IVULIWE.
20. Hlola umjikelezo we-opharetha wesango.
21. Faka ikhava.
    
    
    
    
    
    
    

I-D1156 Rev. B ©2023

support.hysecurity.com

Amadokhumenti / Izinsiza

I-HySecurity SlideDriver II XTREME Drive Slide Gate Operator [pdf] Incwadi Yeziqondiso I-SlideDriver II XTREME Drive Slide Gate Operator, SlideDriver II, XTREME Drive Slide Gate Operator, Slide Gate Operator, Gate Operator, Operator

Izithenjwa

• Imaniwali yosebenzisayo