I-Fos Technologies FOS LED Profile Spot With Zoom

Imininingwane

• Igama Lomkhiqizo: I-FOS Profile 15/30 PRO
• Amandla: 300W
• Izinga lokushisa lombala: 3200K/5600K
• I-LED profile indawo ene-zoom

Imiyalo yokusetshenziswa komkhiqizo

Imiyalo yokuphepha
Qiniseka ukuthi ulandela izinyathelo zokuphepha ezishiwo kumanuwali yomsebenzisi:

• Gwema ukushaqeka kukagesi okuyingozi ngokuphatha umkhiqizo ngokucophelela.
• Gqoka izibuko zokuzivikela kanye ne-PPE lapho usebenza eduze nendawo.
• Xhuma umkhiqizo kuvolumu efaneletage kanye nokuqinisekisa ukuthi kunesisekelo esifanele.
• Linda okungenani imizuzu eyi-10 ukuze uphole ngaphambi kokuphatha ucingo.

Ukufakwa
Landela lezi zinyathelo ukuze ufake okuphephile nokufanelekile:

1. Funda imininingwane yokuphepha enikeziwe ngaphambi kokufaka isikimu.
2. Sebenzisa insimbi endlini endaweni eyomile enomoya owanele.
3. Qinisekisa ukuthi izindawo zokungena komoya azivinjelwe.
4. Bophela insimbi ngokuvikelekile esakhiweni noma endaweni ukuze ugweme ukuwa.
5. Uma ufaka endaweni okungenzeka ibe yingozi, sebenzisa ikhebula lokuphepha njengoba kushiwo encwadini.

Isondlo
Ukuqinisekisa ukuphila isikhathi eside nokuphepha komkhiqizo:

• Njalo hlola i-fixture nentambo yamandla ukuze uthole noma yimuphi umonakalo.
• Faka esikhundleni amafuse ngohlobo olufanayo nokulinganisa uma kudingeka.
• Gcina imanuwali yomsebenzisi kuyo yonke impilo yesevisi yomkhiqizo.
• Landa inguqulo yakamuva yemanuwali yomsebenzisi kusuka kumkhiqizi webindawo.

imibuzo ejwayelekile ukubuzwa

Umbuzo: Ngingakwazi ukusebenzisa lo mkhiqizo ngaphandle?
A: Cha, i-fixture yakhelwe ukusetshenziswa endlini kuphela. Qinisekisa ukuthi ibekwe endaweni eyomile enomoya owanele.

Q: Ngililungisa kanjani izinga lokushisa lombala we-LED profile indawo?
A: I-fixture iza nezinketho zokushisa ezinemibala engu-3200K no-5600K. Sebenzisa isiqeshana sozimele wombala nezilawuli ku-fixture ukuze ulungise njengoba kudingeka.

Umbuzo: Kufanele ngenzenjani uma ngihlangana ne-power outage ngenkathi usebenzisa umkhiqizo?
A: Uma kwenzeka amandla outage, qinisekisa ukuthi ukhipha intambo yamapayipi ngaphambi kwanoma yiziphi ezinye izenzo. Uma amandla esebuyile, xhuma futhi usebenze njengokujwayelekile.

Isexwayiso!

Qaphela ngokusebenza kwakho. Ngevolumu eyingozitage ungahlushwa ukushaqeka kukagesi okuyingozi lapho uthinta izintambo!

Gwema ukubheka ngqo emthonjeni wokukhanya!
Gqoka izibuko zokuzivikela kanye nenye i-PPE (izinto zokuzivikela) lapho usebenza noma eduze nendawo.

Njalo qinisekisa ukuthi uxhuma lo mkhiqizo kuvolumu efaneletage ngokuhambisana nezicaciso ezikule manuwali noma kulebula yokucaciswa komkhiqizo.Qinisekisa ukuthi isekelwe phansi uma uyisebenzisa!

Khipha umthofu wamapayipi amakhulu ngaphambi kokuvula indlu!
Qinisekisa ukuthi intambo kagesi ayilokothwa noma ilinyazwe imiphetho ebukhali. Hlola i-fixture kanye ne-powercord ngezikhathi ezithile.
Qiniseka ukuthi ushintsha i-fuse ufake enye yohlobo olufanayo nesilinganiso.

Ukuze uphephe, sicela ufunde le manuwali yomsebenzisi ngokucophelela ngaphambi kokuthi uqale.
Landela izinyathelo zokuphepha zokusebenza futhi unake izindlela zezimpawu eziyisixwayiso namathuluzi kubhukwana lomsebenzisi.

Isexwayiso! Lolu phawu lubonisa indawo eshisayo. Izingxenye ezithile zendlu zingashisa ngesikhathi sokusebenza. Ngemva kokuwusebenzisa, linda isikhathi sokupholisa phansi okungenani imizuzu eyi-10 ngaphambi kokuluphatha noma ukuthutha ucingo.

Ukusetshenziswa kwangaphakathi kuphela! Ukuze uvimbele ingozi yomlilo noma ukushaqeka, ungawubeki lo mkhiqizo emvuleni noma emswakama. Isilinganiso se-IP 20.
Izinga lokushisa lendawo kufanele lihlale liphakathi kuka -5° C no +45° C.

Wonke umuntu ohilelekile ekufakweni, ekusebenzeni nasekugcinweni kwalolu cingo kufanele – abe ngumuntu ofaneleka

• landela imiyalelo yaleli bhukwana
• bheka leli bhukwana njengengxenye yomkhiqizo ophelele
• gcina leli bhukwana kuyo yonke impilo yesevisi yomkhiqizo
• dlulisela leli bhukwana kubo bonke abanye abanikazi noma umsebenzisi womkhiqizo
• landa inguqulo yakamuva yemanuwali yomsebenzisi ku-inthanethi

Isingeniso

Siyabonga ngokukhetha i-FOS Profile 15/30 PRO. Uzobona ukuthi uthole idivayisi enamandla futhi eguquguqukayo.
Khipha into yakho. Ngaphambi kokuthi uqale, sicela uqinisekise ukuthi akukho monakalo odalwe izinto zokuhamba. Uma kukhona, thintana nomdayisi wakho futhi ungalusebenzisi ucingo.

Imiyalo yokuphepha

Le divayisi ishiye izakhiwo zethu zisesimweni esihle kakhulu. Ukuze kugcinwe lesi simo nokuqinisekisa ukusebenza okuphephile, kubaluleke kakhulu ukuthi umsebenzisi alandele imiyalelo yokuphepha namanothi ayisixwayiso abhalwe kuleli bhukwana lomsebenzisi. Ngaso sonke isikhathi nqamula kumapayipi amakhulu, lapho idivayisi ingasetshenziswa noma ngaphambi kokuyihlanza. Gcina kude izingane kanye nayizimfundamakhwela kusukela kudivayisi! Azikho izingxenye ezisebenzisekayo ngaphakathi kwedivayisi. Imisebenzi yokunakekela kanye nesevisi kufanele yenziwe kuphela abathengisi abagunyaziwe.

PHELILEVIEW

Ukufakwa

Funda 'Ulwazi lokuphepha' ngaphambi kokufaka isikimu.
Isakhiwo senzelwe ukusetshenziswa endlini kuphela futhi kufanele sisetshenziswe endaweni eyomile enomoya owanele. Qinisekisa ukuthi azikho izikhala zokungenisa umoya zalolu hlelo ezivinjiwe.
Bophela isigxivizo esakhiweni esivikelekile noma endaweni. Ungawumi phezulu noma uyishiye lapho inganyakaziswa noma iwe. Uma ufaka into endaweni lapho ingase ibangele ukulimala noma ukulimala uma iwa, ivikele njengoba kuqondiswe kule manuwali yomsebenzisi usebenzisa intambo yokuphepha ehenjelwe ngokuvikelekile ezobamba into uma indlela yokuqala yokubopha ihluleka.

Ukugxilisa into endaweni eyisicaba
I-fixture ingaboshelwa endaweni eqinile, engashintshi, neyisicaba eqondiswe kunoma iyiphi i-engeli. Qinisekisa ukuthi indawo engaphezulu nazo zonke izibophelelo ezisetshenzisiwe zingasekela okungenani izikhathi ezingu-10 isisindo sazo zonke izinto ezilungiswayo nezinto zokusebenza okufanele zifakwe kuyo.
Bopha insimbi ngokuphepha. Ungawumi phezulu noma uyishiye lapho inganyakaziswa noma iwe. Uma ufaka into ethile endaweni lapho ingase ibangele ukulimala noma ukulimala uma iwa, ivikele njengoba kuqondiswe ngezansi ngekhebula elivikelekile elihenjelwe ngokuvikelekile elizobamba into uma indlela yokuqala yokubopha ihluleka.

Ukufaka i-fixture ku-truss
Isakhiwo singaba clamped to a truss noma isakhiwo sokugoqa esifanayo kunoma iyiphi umumo. Lapho ufaka into elengayo phansi, ungasebenzisa uhlobo oluvulekile lwe-clamp njenge-G-clamp. Uma ufaka kunoma iyiphi enye i-orientation, kufanele usebenzise i-half-coupler clamp lokho kuzungeza ngokuphelele i-truss chord.

Ku-clamp ukulungiswa kwe-truss:

1. Hlola ukuthi ukwakheka kwe-rigging kungasekela okungenani izikhathi eziyi-10 isisindo sazo zonke izinto ezilungiswayo nezinto zokusebenza okufanele zifakwe kuso.
2. Vimba ukufinyelela ngaphansi kwendawo yokusebenza.
3. Songa imilenze yabakaki abafakayo ndawonye bese ubopha i-rigging clamp ngokuphephile kubakaki abakhwezwayo. Ibhawodi esetshenzisiwe kufanele ibe yi-M10, ubuncane bensimbi yebanga lesi-8.8. Kumelwe idlule kuyo yomibili imilenze yabakaki abanyukayo futhi iboshwe ngenadi elizikhiyayo.
4. Usebenza endaweni ezinzile, lengisa i-fixture ne-cl yayoamp ku-truss futhi ubophe i-clamp ngokuvikelekile.
5. Vikela into ngekhebula lokuphepha njengoba kuqondiswe ngezansi.

Ukuvikela ngekhebula lokuphepha
Vikela impahla ngekhebula lokuphepha (noma okunye okunamathiselwe kwesibili) okugunyazwe isisindo somshini ukuze ikhebuli yokuphepha izobamba into uma okunamathiselwe okuyinhloko kwehluleka.

Khipha ikhebula lokuphepha ngebholt yeso ngemuva kwento futhi uzungeze iphoyinti lokubambelela elivikelekile. Ungalungi ikhebula lokuphepha kubakaki bokukhweza bendawo kuphela, njengoba lokhu kuzoshiya into ingavikelekile uma ihlukana kubakaki.

Ukuxhumeka/ukuxhumana kwe-DMX-512 phakathi kwezinto ezilungiswayo

Umsebenzi we-XLR-uxhumano:

Uma usebenzisa izilawuli ngalo msebenzi, ungakwazi ukuxhuma okukhiphayo kwe-DMX yesilawuli ngokuqondile nokokufaka kwe-DMX kwesakhiwo sokuqala ku-DMX-chain. Uma ufisa ukuxhuma izilawuli ze-DMX nezinye i-XLR-outpups, udinga ukusebenzisa amakhebuli e-adaptha.

Ukwakha i-serial DMX-chain:
Xhuma okuphumayo kwe-DMX komdlalo wokuqala ku-DMX-chain nokokufaka kwe-DMX kwemidlalo elandelayo. Njalo xhuma okokukhiphayo okukodwa nokokufaka kwesakhiwo esilandelayo kuze kube yilapho zonke izinto sezixhunyiwe.

Uxhumano lwe-DMX-512 ne-DMX terminator:
Ekufakeni lapho ikhebuli ye-DMX kufanele ihambe ibanga elide noma isendaweni enomsindo kagesi, njengase-discotheque, kunconywa ukusebenzisa isinqamuli se-DMX. Lokhu kusiza ekuvimbeleni ukonakala kwesiginali yokulawula idijithali ngomsindo kagesi. Isinqamuli se-DMX simane siyipulaki ye-XLR ene-resistor engu-120 exhunywe phakathi kwamaphini 2 no-3, abese exhunywa kusokhethi okukhiphayo we-XLR yento yokugcina kuketango.

Isexwayiso: Esimeni sokugcina, ikhebuli ye-DMX kufanele inqanyulwe ngesinqamuleli. Songa i-resistor engu-120 Ω phakathi kwe-Signal (–) ne-Signal (+) kupulaki ye-XLR-pin engu-3 futhi uyixhume kokuphumayo kwe-DMX kokugcina.

Ukuxhumeka kwamandla

Izidingo zamandla
I-FOS Profile I-15/30 PRO luminaire isebenza ku-100 kuya ku-240 volts AC (+/- 10%, i-auto-ranging). I-luminaire iqukethe ukunikezwa kwamandla okuzenzakalelayo.

Ukuxhumanisa amandla phakathi kwezakhiwo:
Isakhiwo esinesokhethi yangaphakathi nangaphandle ye-powercon. Xhuma ugesi emandleni akusokhethi endaweni elandelayo kuze kuxhumeke konke.

Isexwayiso: ukuxhuma amandla aphezulu - amayunithi ayi-6.

Ukuxhumana nama-mains:
Xhuma idivayisi kumapayipi amakhulu ngekhebula lokuphakela amandla elivalelwe.

Umsebenzi wezintambo zokuxhuma unjengoba ngezansi:

Ikhebula umbala	Ukuxhumana	Amazwe ngamazwe
Brown	Phila	L
Okuluhlaza okwesibhakabhaka	Ukungathathi hlangothi	N
Okuphuzi / okuluhlaza okotshani	Umhlaba (Ground)

Ukusebenza
I-FOS Profile I-15/30 PRO ingasebenza ngezindlela ezintathu ezihlukene. Kumodi ngayinye ungakwazi ukusebenzisa i-fixture njengendlela yokumisa yodwa noma ku-master/slave confiugration. Lesi sigaba esilandelayo sizochaza umehluko wezindlela zokusebenza.

Lawula Imephu Yemenyu
Ukusetha okuzenzakalelayo ngokugqamile.

OKUMKHULU IMENU	LEVEL 1	LEVEL 2	LEVEL 3	UMSEBENZI UMYALELO
I-DMX	001-512			Ukulungiselelwa kwekheli le-DMX
Imodi	I-DMX	1/2/3CH		Imodi yesiteshi se-DMX
	Okuzenzakalelayo	Uhlelo	001-008	Hlela izinhlelo
		Isivinini	001-009	Isivinini sezinhlelo
	I-Maunal	Ukukhanya	000-255	I-Dimmer 0-100%
		I-Strobe	000-255	Strobe with speed increasing
I-Dimmer	Ijika	0.3-3.0		Ukulungiswa kwamajika e-Dimmer
	Imodi	Okujwayelekile		Imodi ye-Dimmer, Standard
		Stage		Imodi ye-Dimmer, Stage
		TV		Imodi ye-Dimmer, i-TV
		Izakhiwo		Imodi ye-Dimmer, i-Architecture
		Ithiyetha		Imodi ye-Dimmer, Ithiyetha
		Isitudiyo		Imodi yamandla e-Studio, ithule
		Ngokwezifiso	Fade phakathi (150 ms~2230 ms)	Ijika elifiphele ngokwezifiso
			Fade out (150 ms~2230 ms)

Phambili	Ukugunyazwa	Vuliwe/Valiwe		Izilungiselelo/ukulinganisa okuthuthukile(Ochwepheshe abaqeqeshiwe kuphela okufanele benze lo msebenzi. umthengisi wendawo ukuthola iphasiwedi.)
	Ukubamba Isignali	On/Valiwe		Gijimani uma isignali isikiwe
	RDM	On/Valiwe		Umsebenzi we-RDM uvuliwe/uvaliwe
	Isikhathi sokuvala isikrini	30S		Bonisa isikhathi sokuvala
		Ungalokothi
	Ukukhanya Kwesikrini	25 - 100%		Bonisa ukukhanya
	I-Dimming Freq	1.20KHz - 24.0KHz		Isethingi yefrikhwensi ye-Dimmer
	Isoftware Version	Vx.xx		Inguqulo yesofthiwe
Setha kabusha	Yebo/Cha			Ukusethwa kabusha kwesistimu
Reverse	Yebo/Cha			Bonisa i-reverse 180 degree

Imenyu yokulawula
Imenyu yolwazi izovela ngemva kokuvulwa kwesakhiwo. Kule menyu, kuboniswa isimo esilandelayo:

Imenyu Eyinhloko
Cindezela inkinobho MENU ukuze ufake isixhumi esibonakalayo seMenu Eyinhloko.

Iyakhuluma
Zonke izinhlelo kufanele zinikezwe ikheli lokuqala le-DMX lapho kusetshenziswa isignali ye-DMX, ukuze into elungile iphendule kumasiginali okulawula alungile. Leli kheli lokuqala ledijithali inombolo yesiteshi lapho uhlelo luqala khona ukulalela ulwazi lokulawulwa kwedijithali oluthunyelwa luvela kusilawuli se-DMX. Ukunikezwa kwaleli kheli lokuqala kufinyelelwa ngokusetha inombolo elungile kusibonisi esisendaweni ephansi yedivayisi.
Ungasetha ikheli elifanayo lokuqala kuzo zonke izinhlelo noma iqembu lezinhlelo, noma wenze ikheli elihlukile lomdlalo ngamunye ngawodwana.

Uma usetha ikheli elifanayo, wonke amayunithi azoqala ukulalela isignali efanayo yokulawula esuka enombolweni efanayo yesiteshi. Ngamanye amazwi, ukushintsha izilungiselelo zesiteshi esisodwa kuzothinta zonke izinhlelo kanye kanye.

Uma usetha ikheli elihlukile, iyunithi ngayinye izoqala ukulalela inombolo yesiteshi oyimisile, ngokusekelwe enanini lamashaneli okulawula eyunithi. Lokho kusho ukuthi ukushintsha izilungiselelo zesiteshi esisodwa kuzothinta kuphela okukhethiwe.
Endabeni ye-FOS Profile 15/30 PRO okuyisiteshi esingu-1/2/3. Uma usetha, ngokwesiboneloample, isikhangiso esikumodi yesiteshi esingu-1 esiteshini sesi-2, idivayisi izosebenzisa isiteshi 2 ukulawula.

Qaphela: Ngemva kokuvula, idivayisi izothola ngokuzenzakalelayo ukuthi idatha ye-DMX 512 yamukelwe noma cha. Uma kukhona idatha etholiwe kokokufaka kwe-DMX, uzobona ukukhanya kwenkomba ye-DMX ngokuluhlaza.

I-Universal DMX Control
Lo msebenzi ikuvumela ukuthi usebenzise isilawuli se-DMX-512 jikelele ukuze ulawule i-dimmer ne-strobe. Isilawuli se-DMX sikuvumela ukuthi udale izinhlelo ezihlukile ezihambisana nezidingo zakho.

Ukulawulwa kwe-RDM
I-FOS Profile I-15/30 PRO ingaxhumana kusetshenziswa i-RDM (Ukuphathwa Kwedivayisi Ekude) ngokuvumelana ne-ESTA's American National Standard E1.20-2006: Entertainment Technology RDM Remote Device Management Over DMX512 Networks.

I-RDM iyiphrothokholi yezokuxhumana eqondiswa kabili ukuze isetshenziswe ezinhlelweni zokulawula ze-DMX512, iyisitendi esivulekile sokucushwa kwedivayisi ye-DMX512 nokuqapha isimo.

Iphrothokholi ye-RDM ivumela amaphakethe edatha ukuthi afakwe ekusakazweni kwedatha kwe-DMX512 ngaphandle kokuthikameze okokusebenza okwakungeyona eye-RDM yakudala. Ivumela ikhonsoli noma isilawuli se-RDM esizinikele ukuthi sithumele imiyalo futhi samukele imilayezo evela ezilungiselelweni ezithile.
Ngomsebenzi we-RDM, ungasetha ikheli le-DMX lezinhlelo zakho ukude. Lokhu kubaluleke kakhulu uma idivayisi ifakwe endaweni eyihlane.

I-FOS Pro ngayinyefile I-15/30 PRO inesethi yemboni ye-RDM UID (inombolo kamazisi eyingqayizivele).

Qaphela: Ngaphambi kokusebenza, vumela umsebenzi we-RDM kuzilungiselelo Ezithuthukile.

Umsebenzi we-Rotary Knob
I-knob ephaneli elingemuva le-FOS Profile I-15/30 PRO isebenza njengomsebenzi omningi. Kubandakanya ukulawulwa kwe-rotary kwe-dimmer, umsebenzi womsebenzi waphezulu/phansi/ufaka.

Umsebenzi we-Dimmer & strobe:

1. Cindezela inkinobho MENU ukuze ufake imenyu enkulu.
2. Cindezela inkinobho ethi PHEZULU noma PHANSI ukuze ukhethe imenyu yemodi bese ucindezela u-ENTER.
3. Cindezela okuthi PHANSI imenyu bese ukhetha imenyu encane ye-Manual.
4. Cindezela okuthi ENTER bese ukhetha Ukugqama noma I-Strobe kumenyu yesithathu.
5. Zungezisa inkinobho ejikelezayo ukuze ulawule i-dimmer(i-stop kwesokudla = okukhiphayo okuphezulu, isitobhi kwesokunxele = okukhiphayo), noma i-strobe(i-right stop = i-strobe ephezulu, isitobhi kwesokunxele = akukho strobe).
   Qaphela: I-Rotary dimmer noma umsebenzi we-strobe usebenza kulwazi Imenyu nemenyu ye-Mode-Manual.
   Phezulu, Phansi, Faka umsebenzi:
   I-knob futhi ingasebenza njengokuphezulu, phansi kanye nokufaka umsebenzi.
6. Cindezela inkinobho MENU ukuze ufake isixhumi esibonakalayo semenyu enkulu.
7. Ukuzungezisa kwesokudla = Phansi, ukuzungezisa kwesokunxele = Phezulu, cindezela = Faka umsebenzi.Setha amajika amnyama
   Lo msebenzi uvumela ukuthi ukhethe amajika e-dimmer asethwe ngaphambilini kanye namajika angokwezifiso e-dimmer.Ukuze usethe kusengaphambili amajika e-dimmer:
8. Cindezela inkinobho MENU ukuze ufake imenyu enkulu.
9. Cindezela inkinobho ethi PHEZULU noma PHANSI ukuze ukhethe imenyu ye-Dimmer bese ucindezela u-ENTER.
10. Cindezela PHANSI imenyu bese ukhetha imenyu encane ye-Mode.
11. Khetha imodi ye-dimmer engathandeki.
    Amajika angokwezifiso e-dimmer:
12. Cindezela inkinobho MENU ukuze ufake imenyu enkulu.
13. Cindezela inkinobho ethi PHEZULU noma PHANSI ukuze ukhethe imenyu ye-Dimmer bese ucindezela u-ENTER.
14. Cindezela PHANSI imenyu bese ukhetha imenyu encane ye-Mode.
15. Cindezela inkinobho ethi PHEZULU noma PHANSI ukuze ukhethe imenyu yangokwezifiso bese ucindezela u-ENTER.
16. Lungisa ukufiphala futhi uphelelwe isikhathi ukuze wenze ngendlela oyifisayo amajika afiphele. Isikhathi siyahluka kusuka ku-150 ms kuya ku-2230 ms.

Sondeza
Lo msebenzi ikuvumela ukuthi ulungise ububanzi be-beam ye-fixture.

Isinyathelo 1: Khulula izinkinobho zokusondeza ohlangothini lwedivayisi.

Isinyathelo 2: Lungisa i-zoom ngokuslayida i-lens engemuva iye phambili noma emuva. Isinyathelo sesi-3: Qinisa izinkinobho zokusondeza.

Iphrothokholi ye-DMX

1 Imodi yesiteshi	Umsebenzi	Umsebenzi Lawula
I-CH1	I-Dimmer	000-255: 0-100% dimmer

2 Iziteshi Imodi	Umsebenzi	Umsebenzi Lawula
I-CH1	I-Dimmer	000-255: 0-100% dimmer
I-CH2	I-Strobe	000-255: Strobe with speed increasing

3 Iziteshi Imodi	Umsebenzi	Umsebenzi Lawula
I-CH1	I-Dimmer	000-255: 0-100% dimmer
I-CH2	Dimmer kahle	000-255: 16 bit dimmer
I-CH3	I-Strobe	000-255: Strobe with speed increasing

Ukuhlanza Impahla

Ngenxa yensalela yenkungu, intuthu, nothuli ukuhlanza amalensi okubona angaphakathi nangaphandle nesibuko kufanele kwenziwe ngezikhathi ezithile ukuze kuthuthukiswe ukuphuma kokukhanya. Imvamisa yokuhlanza incike endaweni lapho okukhona kusebenza khona (okungukuthi, intuthu, izinsalela zenkungu, uthuli, amazolo). Ekusetshenzisweni kweklabhu okunzima sincoma ukuhlanza njalo ngenyanga. Ukuhlanza ngezikhathi ezithile kuzoqinisekisa impilo ende, nokuphuma okuhlanzekile.

Ukuhlanza i-fixture:

1. Nqamula into emandleni bese uyivumela ukuthi iphole okungenani imizuzu eyi-10.
2. Vacue noma uphephethe kancane uthuli nezinhlayiya ezixegayo ngaphandle kwesakhiwo ngomoya ocindezeleke kancane.
3. Hlanza izindawo ezingaphezulu ngokusula ngobumnene ngendwangu ethambile, ehlanzekile engenalinti eswakanyiswe ngesisombululo sokuhlanza esibuthakathaka. Ungahlikihli indawo yengilazi kanzima: susa izinhlayiya ngokucindezela ngokuphindaphindiwe okuthambile. Yomisa ngendwangu ethambile, ehlanzekile, engena-lint noma umoya onomfutho ophansi. Susa izinhlayiya ezinamathele nge-tis-sue engafakwanga iphunga noma iswabhu kakotini eswakanyiswe ngesicoci sengilazi noma amanzi acwecwe.
4. Hlola ukuthi into yomile yini ngaphambi kokufaka amandla kabusha.

Ukushintshwa kwe-Fuse
Le fuse itholakala kusibambi se-fuse eduze nesokhethi MAINS OUT kuphaneli yokuxhuma.

Ukushintsha i-fuse:

1. Nqamula into emandleni bese uyivumela ukuthi iphole okungenani imizuzu eyi-10.
2. Khipha i-cap yesibambi se-fuse bese ususa i-fuse. Faka esikhundleni ngefuse enosayizi ofanayo nesilinganiso kuphela.
3. Faka kabusha ikepisi yesimeli ngaphambi kokufaka kabusha amandla.

Ukuxazulula inkinga
Uhlu olungezansi kunezinkinga ezimbalwa ezijwayelekile ongahlangabezana nazo, nezisombululo.

I-fixture ayisebenzi, akukho ukukhanya

• Hlola ukuxhumeka kwamandla ne-fuse eyinhloko. Qiniseka ukuthi i-fuse yangaphandle ayizange iqhume.
• Kala umthamo omkhulutage kusixhumi esikhulu.

Ukucaciswa kobuchwepheshe

Ngicela uqaphele: Lonke ulwazi lungashintsha ngaphandle kwesaziso sangaphambili.

www.fos-lighting.eu

Amadokhumenti / Izinsiza

I-Fos Technologies FOS LED Profile Spot With Zoom [pdf] Imaniwali yosebenzisayo 15, 30, FOS LED Profile Spot With Zoom, FOS, LED Profile Spot With Zoom, Profile Spot With Zoom, Spot With Zoom, Zoom

Izithenjwa

• Imaniwali yosebenzisayo