KING LPWV2715-CT24 Vandal Resistant Heater Instruction Manual

1. Umkhiqizo Uphelileview

The KING LPWV2715-CT24 is a robust, vandal-resistant electric heater designed for high-traffic and public areas such as detention facilities, public restrooms, and rest areas. Its heavy-duty construction, including a 3/16-inch solid steel frame and grill, provides exceptional durability against impact and abuse. Tamper-resistant screws secure the grill, and controls are recessed to prevent unauthorized access. This unit offers moderate wattage and high airflow to effectively heat entryways and hallways, preventing drafts from affecting the building's core temperature.

Isithombe 1: Ngaphambili view of the KING LPWV2715-CT24 Vandal Resistant Heater, showcasing its robust metal casing and grill.

Izici Eziyinhloko:

• Impact/Vandal Resistant: Constructed with a heavy grill and 3/16-inch solid steel frame.
• Pic-A-Watt Elements: Allows for multiple wattage options to suit specific heating requirements.
• Tamper Resistant 3 Position Switch: Offers Fan, Heat, and Off settings, designed to prevent unauthorized adjustments.
• Ukuvikela ukushisa ngokweqile: Integrated safety feature to prevent overheating.

2. Ulwazi Lokuphepha

Read all instructions carefully before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Ukufakwa kukagesi: This heater operates on 277 Volts and requires hardwiring. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
• Ukubeka phansi: This heater must be properly grounded to reduce the risk of electric shock.
• Indawo: Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored or used. Maintain proper clearances from combustible materials as specified in the installation section.
• Ukuvikela ukushisa ngokweqile: The heater is equipped with a thermal cut-out to prevent overheating. If the heater shuts off due to overheating, allow it to cool down before attempting to restart. Investigate and correct the cause of overheating.
• Ungakhavi: Never cover the heater or block its air inlets/outlets. This can cause overheating and fire.
• Ukunakekela: Nqamula amandla ngaphambi kokwenza noma yikuphi ukulungisa noma ukuhlanza.

3. Okuqukethwe Kwephakheji

Qinisekisa ukuthi zonke izingxenye zikhona futhi azilimele lapho uvula iphakheji:

• KING LPWV2715-CT24 Vandal Resistant Heater Unit
• I-Hardware yokukhweza (ngokuvamile ifakiwe)
• Incwadi Yokufundisa (le dokhumenti)

Uma kukhona izinto ezingekho noma ezonakele, xhumana nomhlinzeki wakho ngokushesha.

4. Ukufakwa

ISEXWAYISO: Installation must be performed by a qualified electrician. Disconnect all power to the circuit at the main service panel before attempting any wiring.

4.1 Indawo Yokubeka

• This heater is designed for indoor, wall-mount installation.
• Choose a location that allows for proper air circulation and maintains required clearances from walls, ceilings, and floors. Refer to local codes for specific clearance requirements.
• Ensure the mounting surface is structurally sound to support the heater's weight (approximately 36 pounds).

4.2 Ukuxhunywa kukagesi

• The LPWV2715-CT24 heater requires a dedicated 277 Volt, 60 Hz, single-phase circuit.
• I-heater idonsa i-5.4 Amps at 277V, providing 1500 Watts of heat. Ensure the circuit breaker and wiring are appropriately sized for this load.
• Connect the heater directly to the electrical supply using appropriate hardwiring methods and connectors, following the wiring diagram provided inside the heater's access panel.
• Qinisekisa ukuthi konke ukuxhumana kuqinile futhi kuvikelekile.

5. Ukusebenza

Once properly installed and powered, the heater can be operated using its tamper-resistant 3-position switch.

5.1 Power Switch Settings

• VALIWE: The heater is completely off, and no heat or fan operation will occur.
• UMLANDELI: The fan operates continuously without engaging the heating elements. This can be used for air circulation.
• UKUSHISA: The heating elements and fan operate to provide warmth. The heater will cycle on and off to maintain the desired temperature if connected to an external thermostat (not included).

5.2 Wattage Selection (Pic-A-Watt)

The LPWV series heaters feature Pic-A-Watt elements, allowing for field-adjustable wattage settings. Refer to the wiring diagram inside the heater for instructions on how to adjust the wattage to suit specific room requirements. This adjustment should only be performed by a qualified technician with power disconnected.

6. Isondlo

Ukulungiswa njalo kuqinisekisa ukusebenza kahle kanye nobude besikhathi se-heater yakho. Njalo nqamula ugesi ku-circuit breaker ngaphambi kokwenza noma yikuphi ukulungiswa.

• Ukuhlanza: Hlanza ingaphandle lehitha ngezikhathi ezithile ngento ethambile, damp indwangu. Ungasebenzisi izinto zokuhlanza abrasive noma izincibilikisi.
• Izindawo Zokungena/Zokuphuma Zomoya: Ensure that the air inlets and outlets are free from dust, lint, and other obstructions. Use a vacuum cleaner with a brush attachment to gently clean the grill and internal components if accessible.
• Ukuhlola: Annually inspect the heater for any signs of damage, loose wiring, or unusual wear. If any issues are found, contact a qualified electrician for repair.

7. Ukuxazulula izinkinga

Ngaphambi kokuxhumana nokwesekwa kwamakhasimende, review izinkinga ezilandelayo nezisombululo:

Uma inkinga iqhubeka ngemva kokuzama lezi zixazululo, xhumana nosekelo lwamakhasimende noma uchwepheshe kagesi.

8. Imininingwane

9. Iwaranti kanye Nokusekela

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KING webindawo. Gcina irisidi lakho lokuthenga njengobufakazi bokuthenga izimangalo zewaranti.

Umkhiqizi: KING Electrical Manufacturing

Webindawo: www.king-electric.com (Eksample link, sicela uqinisekise isikhulu webindawo)