1. Introduction and Important Safety Warnings
Thank you for choosing the VEVOR US-007/36W UV Disinfection Lamp. This device utilizes advanced UV-C light and ozone generation to effectively purify air and surfaces in unoccupied spaces. Please read this manual thoroughly before use to ensure safe and optimal operation.
CRITICAL SAFETY WARNINGS:
- DANGER: UV-C RADIATION AND OZONE EMISSION. Direct exposure to UV-C light can cause severe skin and eye damage. Ozone can be harmful if inhaled in high concentrations.
- AKUZE operate this lamp in the presence of humans, pets, or plants. Ensure the area is completely clear during operation.
- Ngemuva kokusetshenziswa ngakunye, THOROUGHLY VENTILATE the treated room for at least 30-60 minutes to dissipate any residual ozone before re-entry.
- Keep the device out of reach of children and individuals who cannot understand these warnings.
- Do not disassemble, modify, or attempt to repair the device yourself. Contact qualified personnel for service.
2. Yini EseBhokisini
Carefully unpack all components and check for any damage. If any items are missing or damaged, please contact VEVOR customer support.
- 1 x VEVOR US-007/36W UV Disinfection Lamp
- 1 x Isilawuli kude
- 1 x Alkaline Battery (23A 12V) for Remote Controller
- Isitika esingu-1 se-Lampshade Top
- 1 x Incwadi Yeziqondiso (le dokhumenti)
3. Umkhiqizo Uphelileview
The VEVOR US-007/36W UV Disinfection Lamp is designed for comprehensive air and surface purification. It features a robust design with intuitive controls.
Image 3.1: Product Details. This image shows the main components of the VEVOR UV Disinfection Lamp, including the ABS flame-retardant lamp cover, the 110W long-lifespan light tube, the hand-operated switch on the base, and the wireless remote controller.
Izingxenye Ezibalulekile:
- UV-C Quartz Tube: High-transmission quartz tube emitting 253.7 nm UV-C light and 185 nm UV light for ozone generation.
- I-ABS Flame Retardant Lamp Ikhava: Provides protection for the UV-C tube.
- Base with Control Panel: Features a hand-operated switch and digital display for timer settings.
- Isilawuli kude Sokungenantambo: Allows convenient operation from a distance, offering ON/OFF and timer functions.
Image 3.2: Control Modes. This image illustrates the two control methods: the wireless remote control and the panel control located on the device base. It also highlights the three timer levels: 0.5 hours, 1 hour, and 2 hours.
4. Setha
- Khipha Idivayisi: Carefully remove the UV Disinfection Lamp and all accessories from its packaging. Retain packaging for future storage or transport.
- Ukubekwa: Beka i-lamp on a stable, flat surface in the center of the room you wish to disinfect. Ensure there are no obstructions blocking the UV light path. The lamp is suitable for rooms up to 37 m² (approximately 400 sq ft).
- Ukuxhuma kwamandla: Plug the power cord into a standard electrical outlet (220-240V, 50Hz).
- Ukufakwa kwebhethri yesilawuli kude: Open the battery compartment on the back of the remote control. Insert the provided 23A 12V alkaline battery, ensuring correct polarity (+/-). Close the compartment.
- Lungiselela Igumbi: Before operation, ensure all people, pets, and plants are removed from the room. Close all doors and windows to contain the UV-C light and ozone.
5. Iziqondiso Zokusebenza
Abakwa-lamp can be operated using either the control panel on the device base or the wireless remote control.
Ukusebenzisa Iphaneli Yokulawula:
- Qinisekisa ukuthi i-lamp is plugged in and the room is empty.
- Press the power button on the base. The lamp will typically have a delay before turning on to allow you to leave the room safely.
- Use the timer buttons on the base to select the desired disinfection duration (0.5h, 1h, or 2h).
- Once the timer is set, the lamp will begin operation after a short delay. Immediately exit the room.
Ukusebenzisa isilawuli kude:
- Qinisekisa ukuthi i-lamp is plugged in and the room is empty.
- Point the remote control towards the lamp.
- Press the 'ON' button to power on the lamp.
- Select the desired timer setting (0.5H, 1H, or 2H) using the corresponding buttons on the remote.
- Abakwa-lamp will activate after a short delay. Immediately exit the room.
Ngemuva Kokusebenza:
- Once the selected disinfection cycle is complete, the lamp izocisha ngokuzenzakalelayo.
- UNGENZI re-enter the room immediately. Open windows and doors (from outside the room if possible) to allow for thorough ventilation.
- Ventilate the room for at least 30-60 minutes to ensure all ozone has dissipated before re-entry.
Image 5.1: Ozone and UV-C Action. This image visually represents the lamp's dual action, showing UV-C light and ozone (O3) being emitted to purify the air and surfaces within a room, covering up to 37 m².
6. Isondlo
Regular maintenance ensures the longevity and effectiveness of your UV Disinfection Lamp.
Ukuhlanza i-Lamp:
- Ngaso sonke isikhathi khipha ipulaki esitokisini sikagesi ngaphambi kokuhlanza.
- Use a soft, dry cloth to gently wipe the exterior of the lamp and the quartz tube.
- Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the device or reduce the effectiveness of the UV-C tube.
- Qinisekisa ukuthi i-lamp yome ngokuphelele ngaphambi kokuyixhuma futhi.
Isilawuli kude Esikhundleni Sebhethri:
- If the remote control becomes unresponsive, replace the 23A 12V alkaline battery.
- Open the battery compartment, remove the old battery, and insert a new one with correct polarity.
- Lahla amabhethri amadala ngokwemithetho yendawo.
7. Ukuxazulula izinkinga
If you encounter issues with your VEVOR UV Disinfection Lamp, bheka izinkinga nezixazululo ezilandelayo ezivamile:
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Lamp ayivuli. | Akukho ukunikezwa kwamandla. Isilawuli kude ibhethri ufile. Idivayisi inephutha. | Hlola ukuthi intambo yamandla ixhunywe ngokuvikelekile yini endaweni esebenzayo. Shintshanisa ibhethri yesilawuli kude. Uma inkinga iqhubeka, xhumana nosekelo lwamakhasimende lwe-VEVOR. |
| Isilawuli kude asisebenzi. | Ibhethri lifile noma lifakwe ngokungalungile. Ukuphazamiseka phakathi kwesilawuli kude kanye ne-lamp. Remote is too far from the lamp. | Replace the remote control battery and ensure correct polarity. Qinisekisa ukuthi kukhona umugqa ocacile wokubona phakathi kwesilawuli kude kanye ne-lamp. Operate the remote within its effective range. |
| Strong odor after disinfection. | Residual ozone in the air. | This is normal. Ensure thorough ventilation of the room for at least 30-60 minutes after use. |
8. Imininingwane
Detailed technical specifications for the VEVOR US-007/36W UV Disinfection Lamp.
Image 8.1: Dimensions and Specifications. This image provides a visual representation of the lamp's dimensions and lists key specifications such as model number, power, timer settings, material, wavelength, color, controller size, product size, product weight, and package contents.
| Isici | Ukucaciswa |
|---|---|
| Inombolo Yemodeli | I-US-007/36W |
| Amandla | 36 W |
| Izilungiselelo Zesibali sikhathi | 3 Levels (0.5 h / 1 h / 2 h) |
| Okubalulekile | I-ABS |
| Ubude begagasi | 253.7 nm + 185 nm (UV-C light + Ozone) |
| Umbala | Mnyama |
| Usayizi wesilawuli | 4.1 x 1.7 x 0.7 in / 105 x 45 x 18 mm |
| Ubukhulu bomkhiqizo (Ububanzi x Ubude) | Φ6.5 x 16.4 in / Φ166 x 416 mm |
| Isisindo Somkhiqizo | 1.3 lb / 0.6 kg ± 3% |
| Kulinganiswe ngoVoltage Imvamisa | 220-240 V, 50 Hz |
| Isikhathi Sokuphila Somthombo Wokukhanya | Amahora angu-8000 |
| Indlela Yokulawula | Remote Control, Panel Control |
| Indawo Yokumboza | Up to 37 m² (approx. 400 sq ft) |
9. Iwaranti kanye Nokusekela
VEVOR products are designed for durability and performance. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official VEVOR webindawo ngemigomo nemibandela yewaranti enemininingwane.
Ukwesekwa Kwamakhasimende:
If you have any questions, require technical assistance, or need to report an issue, please contact VEVOR customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (US-007/36W) and purchase details ready.
For more information and to register your product, visit: www.vevor.com