DARKROCK Classico Max Storage Master E-ATX Computer Case Instruction Manual

1. Isingeniso

This manual provides detailed instructions for the assembly, operation, and maintenance of your DARKROCK Classico Max Storage Master E-ATX Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

2. Izici Eziyinhloko

• Extensive Storage Support: Accommodates up to 10x 3.5" HDDs and 3x 2.5" SSDs, providing ample ndawo yokugcina idatha.
• Ukufakwa kwe-GPU Eqondile: Features 3 vertical slots for graphics card installation, optimizing airflow and aesthetics.
• Ukuhambisana kwe-Motherboard: Supports E-ATX, ATX, M-ATX, and ITX motherboards. Note: Hard drive cages may need to be removed for E-ATX motherboard installation.
• Advanced Cooling Support: Designed to support up to a 360mm liquid radiator in the top panel for efficient heat dissipation.
• Ukugeleza komoya okulungiselelwe: Mesh front and side panels, combined with four pre-installed 120mm fans, ensure excellent heat dissipation and maintain low internal temperatures.
• Front Panel Connectivity: Includes 2x USB 3.0 ports, 2x USB 2.0 ports, and HD audio jacks for convenient peripheral access.

3. Imininingwane

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

4. Umhlahlandlela wokusetha

4.1. Ukulungisa Icala

1. Khipha Ikesi: Carefully remove the computer case from its packaging.
2. Susa amaphaneli aseceleni: Locate the thumbscrews on the rear of the case. Unscrew them and gently slide off the side panels. Set them aside in a safe place.
3. Hlola Izinsiza: Verify all included accessories (screws, cable ties, manual) are present.

4.2. Ukufakwa kwe-Motherboard

1. Faka Ukuma: Ensure the correct motherboard standoffs are installed for your motherboard form factor (E-ATX, ATX, M-ATX, ITX). Additional standoffs may be in the accessory kit.
2. Faka i-I/O Shield: Snap your motherboard's I/O shield into the rear I/O opening of the case.
3. I-Mount Motherboard: Carefully align your motherboard with the standoffs and I/O shield. Secure it with the provided screws.
4. E-ATX Note: For E-ATX motherboards, it may be necessary to remove the front hard drive cages to provide sufficient clearance. Refer to the specifications for exact dimensions.

4.3. Drive Installation (HDD/SSD)

• 3.5" HDD Installation: The case supports up to 10x 3.5" HDDs in dedicated drive bays. Slide the HDD into an available bay and secure it with screws.
• 2.5" SSD Installation: The case supports up to 3x 2.5" SSDs. These typically mount behind the motherboard tray or in specific 2.5" drive trays. Secure the SSD with screws.

4.4. Ukufakwa Kwekhadi Lezithombe (GPU).

• Ukufakwa Okujwayelekile: Insert the GPU into the appropriate PCIe slot on your motherboard and secure it with the retention clip and a screw to the case.
• Ukufakwa Okume mpo: The case features 3 vertical expansion slots for vertical GPU mounting. An optional PCIe riser cable (not included) is required for this configuration. Install the riser cable, then mount the GPU vertically and secure it.

4.5. Cooling System Setup

• Abalandeli abafakwe ngaphambilini: The case comes with four 120mm fans pre-installed (three front, one rear). Connect these fans to your motherboard's fan headers or the included 6x 3-pin fan hub (powered via SATA).
• Liquid Radiator Installation: The top panel supports up to a 360mm liquid radiator. Ensure adequate clearance and remove any obstructing components (e.g., top hard drive cage) if necessary.

4.6. Ukuphathwa Kwentambo

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean internal appearance.

Isithombe: Kuqhume view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

5. Iziqondiso Zokusebenza

• Vula/Vala: Use the power button located on the top front panel to turn the system on or off.
• Setha kabusha Inkinobho: The reset button is also on the top front panel for system restarts.
• Izimbobo Zephaneli Yangaphambili: Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the HD audio jacks for headphones and microphones.

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

6. Isondlo

• Ukuhlanza Isihlungi Sothuli: The case includes dust filters on the front, top, and bottom (for PSU). Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
• Ukuhlanza Kwangaphakathi: Periodically open the side panels and use compressed air to remove dust from internal components, especially fans and heatsinks.

7. Ukuxazulula izinkinga

• Isistimu Ayisebenzi:
  • Ensure the power supply is properly connected to the wall outlet and the case.
  • Hlola konke ukuxhumana kwamandla kwangaphakathi (i-ATX enamaphini angu-24, amandla e-CPU, amandla e-GPU).
  • Verify front panel power button cables are correctly connected to the motherboard.
• Akukho okukhiphayo kokubonisa:
  • Confirm the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
  • Hlela kabusha amamojula ekhadi lehluzo kanye ne-RAM.
• Izinkinga zokushisa ngokweqile:
  • Ensure all case fans are spinning and connected correctly.
  • Clean dust filters and internal components.
  • Verify CPU cooler is properly seated and making good contact with the CPU.
• IDrayivu Ayitholakali:
  • Check SATA data and power cables for secure connections to both the drive and motherboard/power supply.
  • Verify the drive is enabled in the BIOS/UEFI settings.

8. Iwaranti & Ukusekela

The DARKROCK Classico Max computer case comes with a Iwaranti yonyaka ongu-1 kusukela ngosuku lokuthenga. Lesi siqinisekiso simboza amaphutha okukhiqiza kanye namaphutha ezinto ezibonakalayo ngaphansi kokusetshenziswa okuvamile.

For technical support, warranty claims, or further assistance, please visit the official DARKROCK webisayithi noma uxhumane nomnyango wabo wesevisi yamakhasimende. Gcina ubufakazi bakho bokuthenga ukuze uqinisekise iwaranti.

Official DARKROCK Store: DARKROCK Amazon Store

9. Igalari yabezindaba

Isithombe: Ngaphambili view of the DARKROCK Classico Max computer case.

Isithombe: Ngaphakathi view of the case, highlighting its suitability for various applications like video editing, home theater, and gaming.

Image: Internal layout showing drive bay locations and case dimensions (18.3"D x 9.06"W x 18.78"H).

Image: Internal clearances for CPU cooler (max 180mm height), GPU (295mm, 400mm if drive bay removed), and motherboard sizes (E-ATX, ATX, M-ATX, ITX).

Image: Diagram illustrating liquid radiator and fan support locations (240/280/360mm liquid radiator, 140mm/120mm fans).

Image: Close-up of the top front panel showing USB 3.0, USB 2.0, HD Audio, Reset, and Power buttons.

Isithombe: Kuqhume view of the case showing removable panels and internal structure.

Image: Rear internal view showing cable routing options and fan hub.

Image: Diagram showing the location of the four pre-installed 120mm fans and the 6x 3-pin fan hub with SATA power input.

Amavidiyo