Pro-Ject T1 Evo with Preamp
Pro-Ject T1 Evo Phono Turntable User Manual
Model: T1 Evo with Preamp | Brand: Pro-Ject
Isingeniso
The Pro-Ject T1 Evo Phono Turntable is designed to deliver high-fidelity audio for vinyl enthusiasts. This model features a built-in phono pre-amplifier, allowing for direct connection to various audio systems. It comes equipped with an Ortofon OM 10 moving magnet cartridge, pre-aligned for optimal performance. The turntable's plinth is CNC-machined, avoiding plastic components to minimize resonant hollow spaces, ensuring pure sound reproduction. An elegant dust cover with adjustable hinges and a low-capacitance Connect it Phono E RCA cable are included for convenience and quality.
Umhlahlandlela Wokusetha
1. Ukuqaqa nokubeka
Carefully remove all components from the packaging. Place the turntable on a stable, level surface away from direct sunlight, heat sources, and excessive vibration. Ensure adequate ventilation around the unit.
Figure 1: Pro-Ject T1 Evo Phono Turntable with dust cover open.
Figure 2: Pro-Ject T1 Evo Phono Turntable with dust cover closed, protecting the components.
2. Umhlangano
- Place the platter onto the spindle.
- Carefully place the felt mat on top of the platter.
- Attach the dust cover by aligning its hinges with the slots on the turntable's base.
3. Ukuxhumana
Connect the included RCA cable from the turntable's output to an available input on your amplifier or powered speakers. Since this model has a built-in phono pre-amplifier, you can connect it directly to a line-level input (e.g., AUX, CD, Line In). Ensure the ground wire is connected from the turntable to your amplifier's ground terminal to minimize hum.
Figure 3: Rear connections for RCA output and ground wire.
Connect the power adapter to the turntable and then to a wall outlet.
Imiyalelo yokusebenza
1. Vula/Vala
Locate the power switch on the side of the turntable. Flip the switch to the 'On' position to power on the unit. The platter will begin to rotate. Flip to 'Off' to power down.
Figure 4: Power switch location.
2. Ukudlala Irekhodi
- Ensure the dust cover is open or removed.
- Place your vinyl record onto the felt mat on the platter.
- Carefully remove the stylus protector from the cartridge.
- Phakamisa ithoningalo usebenzisa i-lever yokuphakamisa ithoni.
- Hambisa kancane ingalo phezu komsele owufunayo wokuqala werekhodi.
- Lower the tonearm using the tonearm lift lever. The stylus will gently descend onto the record, and playback will begin.
- To stop playback, lift the tonearm using the lever and return it to its rest.
Figure 5: Tonearm and Ortofon OM 10 cartridge.
Figure 6: Ortofon OM 10 cartridge detail.
3. Ukuxhumana kwe-Bluetooth
The T1 Evo Phono Turntable supports Bluetooth connectivity for wireless audio streaming to compatible Bluetooth speakers or headphones. Refer to your Bluetooth device's manual for pairing instructions. The turntable will automatically attempt to connect to previously paired devices when powered on.
Isondlo
1. Cleaning the Turntable
- Wipe the plinth and dust cover with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- For the acrylic dust cover, use a specialized acrylic cleaner to prevent scratches.
2. Ukunakekelwa Kwesitayela
- Njalo hlola i-stylus ukuze uthole uthuli nemfucumfucu.
- Use a soft stylus brush, brushing gently from back to front, to remove any accumulated particles.
- Replace the stylus when sound quality degrades or after approximately 1,000 hours of playback.
Ukuxazulula inkinga
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Akukho msindo noma umsindo ophansi kakhulu | Incorrect input selection on amplifier; loose cables; volume too low. | Qinisekisa amplifier input matches turntable connection (e.g., Line In); check all cable connections; increase volume. |
| Umsindo ovungamayo | Ground wire not connected; interference from other electronics. | Connect the ground wire securely; move turntable away from other electronic devices. |
| Umsindo oweqayo noma ohlanekezelwe | Dirty or worn stylus; record is dirty or damaged; turntable not level. | Clean the stylus; clean the record; ensure turntable is on a level surface; replace stylus if worn. |
| Ucwecwe alupholi | Amandla awaxhunyiwe; ukucisha amandla. | Check power connection; ensure power switch is in the 'On' position. |
Imininingwane
| Isici | Imininingwane |
|---|---|
| Ubukhulu bomkhiqizo | 13.19 x 16.34 x 3.94 amayintshi |
| Isisindo sento | 14.92 amakhilogremu |
| ASIN | B0DHTXH32G |
| Inombolo Yemodeli Yento | T1 Evo with Preamp |
| Umkhiqizi | I-Pro-Ject |
| Ibhrendi | I-Pro-Ject |
| Ubuchwepheshe bokuxhumana | Inezintambo |
| Isivinini esikhulu sokuzungeza | 45 RPM |
| Isici Esikhethekile | Isivinini Esishintshekayo |
| Isitayela | I-Pre-eyakhelwe ngaphakathiamp |
| Umbala | U-Satin White |
| Igama Lemodeli | T1 Evo with Preamp |
| Ukulinganisa-to-Noise Ratio | 70db |
| Usuku Lokuqala Olutholakalayo | Septhemba 24, 2024 |
Iwaranti kanye Nokusekela
Ulwazi Lwewaranti
This Pro-Ject T1 Evo Phono Turntable comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.
Ukwesekwa Kwamakhasimende
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject customer support. Visit the official Pro-Ject webiwebhusayithi yemininingwane yokuxhumana kanye nezinsiza ezengeziwe.
Note: Always ensure to use genuine Pro-Ject replacement parts and accessories to maintain product performance and warranty validity.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.