Isingeniso
Thank you for choosing the tectake Arges Ergonomic Office Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.
The tectake Arges office chair is designed to provide optimal seating comfort and support, helping to alleviate back issues during long periods of sitting. Its features include a height and angle-adjustable headrest, comfortable reclinable armrests, continuous height adjustment, breathable mesh fabric, and a height-adjustable lumbar support with adjustable tilt resistance.
Imiyalo yokuphepha
- Qinisekisa ukuthi zonke izingxenye zikhona futhi azilimele ngaphambi kokuhlanganiswa. Ungazisebenzisi uma kukhona izingxenye ezilahlekile noma ezonakele.
- Beka isihlalo endaweni ethambile nehlanzekile ukuze uvimbele ukuklwebheka.
- Ungami esihlalweni.
- Ungasebenzisi isihlalo njengesihlalo sezinyathelo.
- Gcina izingane kude nesihlalo ngesikhathi sokuhlanganiswa. Izingxenye ezincane zingaba yingozi yokuminyana.
- The maximum load capacity for this chair is 120 kg (264 lbs). Do not exceed this weight limit.
- Hlola njalo zonke izikulufo kanye nokuxhumeka ukuqinisekisa ukuthi ziqinile. Ziqinise kabusha uma kudingeka.
- Avoid exposing the chair to direct sunlight or extreme temperatures for prolonged periods.
Ukusetha nokuhlanganisa
Follow these steps to assemble your tectake Arges office chair. It is recommended to have two people for assembly.
- Khipha Izingxenye: Carefully remove all parts from the packaging and lay them out on a protected surface. Verify all parts are present against the included parts list (refer to your product packaging for the complete list).
- Namathisela ama-Casters kusisekelo: Faka ama-caster amahlanu emigodini ekugcineni komlenze ngamunye wesisekelo sesihlalo. Cindezela ngokuqinile kuze kube yilapho echofoza endaweni yawo.
- Faka I-Gas Lift: Faka isilinda sokuphakamisa igesi emgodini ophakathi wesisekelo sesihlalo.
- Isihlalo kanye ne-Backrest yokuhlanganisa: Attach the backrest to the seat using the provided screws and tools. Ensure the orientation is correct.
- Namathisela i-Armrests: Secure the armrests to the seat and backrest assembly using the designated screws.
- Mount Mechanism: Attach the control mechanism to the underside of the seat using the appropriate screws. Ensure the lever is facing the front or right side for easy access.
- Xhuma Isihlalo ku-Gas Lift: Beka ngokucophelela isihlalo esihlanganisiwe kusilinda sokuphakamisa igesi, uqinisekise ukuthi siphakathi nendawo futhi sizinzile.
- Namathisela i-Headrest: Slide the headrest into the designated slots at the top of the backrest and secure it.
After assembly, sit on the chair to ensure all components are securely connected and stable.
Imiyalelo yokusebenza kanye nokulungiswa
Your tectake Arges office chair offers several adjustment options to customize your seating experience for optimal comfort and ergonomic support.
Ukulungiswa Kokuphakama Kwesihlalo
To adjust the seat height (approx. 45-55 cm):
- Ukukhuphula: Lift the lever located under the seat on the right side while taking your weight off the seat. The seat will rise automatically.
- Ukwehlisa: Lift the lever while seated. The seat will lower under your weight. Release the lever at the desired height.
Backrest Tilt Function
The chair features a tilt function with adjustable resistance.
- To activate/deactivate tilt: Pull out or push in the lever located under the seat (often the same lever as height adjustment, or a separate one).
- To adjust tilt resistance: Turn the round knob located under the front of the seat. Turn clockwise to increase resistance (making it harder to tilt) and counter-clockwise to decrease resistance (making it easier to tilt).
Ukusekelwa Kwe-Lumbar Okulungisekayo
The lumbar support is height-adjustable to provide targeted support for your lower back.
- Grasp the lumbar support pad on the backrest and slide it up or down to your preferred position.
Image: Close-up of the adjustable lumbar support mechanism on the chair's backrest.
Ama-headrest anokulungiswa
The headrest can be adjusted in both height and angle.
- Ukulungiswa kobude: Gently pull the headrest up or push it down to adjust its height.
- Ukulungiswa kwe-engeli: Tilt the headrest forward or backward to find the most comfortable angle for your neck and head.
Image: Close-up of the adjustable headrest, showing its height and angle adjustment capabilities.
Reclinable Armrests
The armrests can be tilted backward to allow the chair to be pushed closer to a desk or for easier movement.
- Simply lift the armrests upwards to recline them. Push them back down to their original position.
Isondlo Nokunakekela
Proper maintenance will extend the life of your tectake office chair.
- Ukuhlanza: Hlanza isihlalo usebenzisa isikhangisoamp cloth. For stubborn stains, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners.
- Ukunakekelwa Kwendwangu: The breathable mesh fabric and padded seat can be gently wiped. Do not saturate with water.
- Ukunakekelwa Kohlaka: Izingxenye zensimbi nezepulasitiki ezisulayo ngesikhangisoamp indwangu.
- I-Caster Maintenance: Periodically check casters for hair or debris and clean them to ensure smooth movement.
- Isheke Lokubopha: Regularly inspect all screws and bolts to ensure they are tight. Retighten as needed to maintain stability and safety.
- Isitoreji: If storing the chair for an extended period, keep it in a cool, dry place away from direct sunlight.
Ukuxazulula inkinga
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Isihlalo asilungisi ukuphakama. | Ukungasebenzi kahle kwe-gas lift noma i-lever engakasebenzi. | Ensure the lever is fully engaged. If the problem persists, the gas lift may need replacement. Contact customer support. |
| Isihlalo siyaxega noma sizizwe singazinzile. | Izikulufu ezixegayo noma ukuhlanganisa okungafanele. | Check and tighten all screws and bolts, especially those connecting the seat, backrest, and mechanism to the base. Ensure the gas lift is properly seated. |
| Ama-Caster awagingqiki kahle. | Imfucumfucu (izinwele, uthuli) ebanjwe ezitsheni. | Phendula isihlalo bese ususa ngokucophelela noma yikuphi ukungcola emasondweni e-caster. |
| Backrest tilt is too loose or too stiff. | Tilt tension not adjusted correctly. | Adjust the tilt tension knob located under the seat. Turn clockwise for more resistance, counter-clockwise for less. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact tectake customer support for assistance.
Imininingwane
| Isici | Imininingwane |
|---|---|
| Ibhrendi | I-TecTake |
| Inombolo Yemodeli | 405323 |
| Umbala | Mnyama |
| Ubukhulu Obuphelele (Ububanzi x Ububanzi x Ububanzi) | approx. 68 x 63 x 121-131 cm |
| Ukuphakama Kwesihlalo | cishe. 45-55 cm |
| Indawo Yesihlalo (W x D) | cishe. 50x50cm |
| Ubukhulu be-Padding | cishe. 7 cm |
| Backrest Ukuphakama | cishe. 55 cm |
| Umthamo Omkhulu Womthwalo | 120 kg (264 lbs) |
| Isisindo sento | 11.3 kg (24.9 lbs) |
| Izinto zokwakha | Wood, Metal, Fabric (Frame: polypropylene, steel) |
| Izici ezikhethekile | Adjustable headrest, Adjustable lumbar support, 360° Swivel, Double casters |
| Iziyalezo Zokunakekela | Hlanza ngesikhangisoamp indwangu |
Image: Detailed dimensions of the tectake Arges office chair.
Iwaranti kanye Nokusekela
For warranty information or technical support, please refer to the purchase documentation or contact tectake customer service directly. Contact details can typically be found on the manufacturer's webisayithi noma irisidi lakho lokuthenga.
Umkhiqizi: i-tectake
Umdayisi: tectake nederland
Inqubomgomo Yokubuyisela: 30 izinsuku