Roca VICTORIA PLUS A5A2J18C00 Thermostatic Bath-Shower Column

1. Isingeniso

This manual provides detailed instructions for the installation, operation, and maintenance of your Roca VICTORIA PLUS A5A2J18C00 Thermostatic Bath-Shower Column. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

Figure 1: Roca VICTORIA PLUS A5A2J18C00 Thermostatic Bath-Shower Column

2. Ulwazi Lokuphepha

• Qinisekisa ukuthi zonke izintambo zokuphakela amanzi zivaliwe ngaphambi kokuqala ukufakwa.
• Uma ungaqiniseki nganoma iyiphi ingxenye yenqubo yokufaka, thintana nomsebenzi wokufaka amapayipi oqeqeshiwe.
• Do not use abrasive cleaners or harsh chemicals on the product, as this may damage the finish.
• Regularly check for leaks and address them promptly to prevent water damage.
• The thermostatic mixer is designed to maintain a constant water temperature. Do not tamper with the factory settings unless necessary and with caution.

3. Okuqukethwe Kwephakheji

Qinisekisa ukuthi zonke izingxenye zikhona futhi azilimele ngaphambi kokufakwa:

• I-Thermostatic mixer
• Adjustable height shower column (1295 mm to 1670 mm)
• Overhead shower head (ø 245 mm)
• Hand shower (ø 100 mm, 3 functions)
• 1.7 m metallic flexible hose
• Shower column mounting kit

4. Imininingwane

Figure 2: Technical drawing with key dimensions for installation.

5. Ukufakwa

Professional installation is recommended. Ensure you have all necessary tools and safety equipment before proceeding.

5.1. Lungiselela Indawo Yokufaka

1. Turn off the main water supply to your bathroom.
2. Remove any existing shower fixtures.
3. Clean the wall surface where the shower column will be mounted.

5.2. Mount the Thermostatic Mixer

1. Install the eccentric connectors into the wall water outlets. Ensure they are securely tightened and properly aligned.
2. Attach the decorative escutcheons over the eccentric connectors.
3. Connect the thermostatic mixer to the eccentric connectors. Ensure the hot water inlet (marked red) and cold water inlet (marked blue) are correctly aligned. Tighten the nuts using a wrench, protecting the finish with a cloth.

5.3. Install the Shower Column

1. Attach the lower part of the shower column to the top outlet of the thermostatic mixer.
2. Assemble the adjustable height mechanism onto the main column.
3. Mark the position for the upper wall bracket on the wall, ensuring the column is vertical and at the desired height.
4. Drill holes at the marked positions, insert wall plugs, and secure the upper wall bracket.
5. Secure the shower column to the upper wall bracket using the provided screws and Allen key.

5.4. Attach Shower Components

1. Screw the overhead shower head onto the shower arm. Ensure a watertight seal.
2. Connect the metallic flexible hose to the hand shower and the outlet on the thermostatic mixer.
3. Place the hand shower into its adjustable holder on the column.

6. Ukusebenza

6.1. Thermostatic Mixer

• Ukulawula izinga lokushisa: The right handle controls the water temperature. Push the safety button and turn to adjust above 38°C.
• Ukulawula Ukugeleza: The left handle controls the water flow and diverts water between the overhead shower, hand shower, and bath filler (if applicable).

6.2. Hand Shower Functions

The hand shower features 3 spray functions. Rotate the shower head face to switch between spray patterns.

6.3. Adjustable Height and Angle

• The hand shower holder can be adjusted up or down the column and tilted to your preferred angle.
• The overhead shower head can be tilted and swiveled to adjust the spray direction.

7. Isondlo

7.1. Ukuhlanza

• Clean the chrome surfaces regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for bathroom fixtures.
• Avoid using abrasive sponges, scouring pads, or harsh chemical cleaners, as these can damage the finish.
• For shower heads, periodically rub the silicone nozzles to dislodge any limescale buildup.

7.2. Limescale Removal

In hard water areas, limescale can build up. Use a descaling solution suitable for bathroom fixtures, following the manufacturer's instructions. Rinse thoroughly after cleaning.

8. Ukuxazulula izinkinga

9. Iwaranti kanye Nokusekela

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Roca webindawo. Gcina ubufakazi bakho bokuthenga ngezimangalo zewaranti.