ANDTE DE305

ANDTE 305 Pint Commercial Dehumidifier Instruction Manual

Imodeli: DE305

1. Isingeniso

Thank you for choosing the ANDTE 305 Pint Commercial Dehumidifier. This powerful unit is engineered for high-efficiency moisture removal in large commercial and industrial spaces, basements, and during water damage restoration. With its robust design and intelligent features, it provides reliable and continuous dehumidification to maintain optimal humidity levels and prevent issues like mold and mildew.

ANDTE Commercial Dehumidifier overview showing 305 PPD, 130 PPD AHAM, 9000 sq.ft coverage, and 420 CFM.

Kuphelileview of the ANDTE Commercial Dehumidifier's capabilities, including moisture removal rates and coverage area.

Diagram illustrating the dehumidifier's coverage for 7000 sq.ft commercial, 8000 sq.ft warehouse, and 9000 sq.ft basement.

The dehumidifier is designed for large area dehumidification, maximizing drying performance in spaces up to 9,000 sq.ft.

2. Ulwazi Lokuphepha

Please read all safety instructions carefully before operating the dehumidifier. Failure to comply with these instructions may result in electric shock, fire, or serious injury.

  • Ensure the unit is connected to a NEMA 5-20 receptacle (20 Amps, 125 Volts) to meet commercial and industrial electrical codes and safety standards.
  • Ungayisebenzisi iyunithi ngentambo eyonakele noma ipulaki.
  • Gcina iyunithi ikude namanzi nolunye uketshezi.
  • Ungavimbeli izindawo zokungena komoya noma izitolo.
  • This appliance uses R32 refrigerant. Servicing should only be performed by trained service personnel.
  • Lahla umkhiqizo ngokuhambisana nemithetho kahulumeni noma yendawo.
Image showing a NEMA 5-20 receptacle and the corresponding 20 Amp, 125 Volt plug for the dehumidifier.

Important note regarding the required NEMA 5-20 receptacle for proper operation.

3. Okuqukethwe Kwephakheji

Qinisekisa ukuthi zonke izinto zikhona kuphakheji:

  • ANDTE Commercial Dehumidifier Unit
  • Khipha iHose
  • Imaniwali yosebenzisayo

4. Setha

Landela lezi zinyathelo zokusetha kokuqala:

  1. Ukukhulula: Khipha ngokucophelela i-dehumidifier ephaketheni layo. Hlola ukuthi akukho yini umonakalo wokuthunyelwa.
  2. Ukubekwa: Place the unit on a stable, level surface in the desired area. Ensure there is adequate space around the unit for proper airflow (at least 12 inches from walls or obstructions).
  3. Ukusethwa kweDrainage: This unit supports both pump drainage and auto gravity drainage.
    • Ukumpompa Amanzi: Connect the drain hose to the pump outlet. The built-in pump can lift water up to 16.5 ft, allowing for flexible drainage options.
    • Auto Gravity Drainage: Connect the provided 6.56 ft drain hose to the gravity drain outlet. Ensure the hose is sloped downwards to a suitable drain point (e.g., floor drain, sink) for continuous drainage.
  4. Ukuxhuma kwamandla: Xhuma i-dehumidifier endaweni ezinikele engu-20 Amp, 125 Volt NEMA 5-20 receptacle.
Diagram showing options for pump drainage up to 16.5ft and auto gravity drainage with a 6.56ft hose.

Drainage options: built-in pump for elevated drainage or gravity drainage with the included hose.

5. Iziqondiso Zokusebenza

The dehumidifier features an intuitive control panel for easy operation.

Control panel of the dehumidifier showing buttons for continuous dehumidification, memory starting, auto defrost, and auto drain.

The intelligent control panel offers simple operation with features like continuous dehumidification, memory starting, auto defrost, and auto drain.

Imisebenzi Yephaneli Yokulawula:

  • Inkinobho yamandla: Kuvula iyunithi KUVALIWE / KUVALIWE.
  • Isilungiselelo Somswakama: Use the Up/Down arrows to set your desired humidity level (10% - 98% RH). The unit will operate to maintain this level.
  • Umsebenzi Wesibali sikhathi: Set the unit to automatically turn ON or OFF after a specified period (1-24 hours).
  • Imodi Eqhubekayo: For continuous operation, select the continuous dehumidification mode. This is ideal for rapid drying.
  • I-Auto Defrost: The unit features an automatic defrost cycle. If frost is detected on the coils, the compressor will temporarily shut down while the fan continues to run, melting the frost. Dehumidification resumes automatically once defrosting is complete.
Illustration of the auto defrost process, showing evaporator condensate frosting and the defrost completed state.

The auto defrost function ensures efficient operation by preventing coil freezing.

Izici ezikhethekile:

  • Ukuqala Kwenkumbulo: Uma kwenzeka amandla outage, the unit will automatically restart with the previously set humidity and operation mode once power is restored.
  • Ukusebenza Komsindo Ophansi: Designed to operate efficiently with noise levels at or below 54dB.

6. Isondlo

Ukunakekelwa okuvamile kuqinisekisa ukusebenza okuphelele nokuphila isikhathi eside kwe-dehumidifier yakho.

  • Ukuhlanza Isihlungi: The unit is equipped with a removable filter that protects internal components from dust and particles. Clean the filter regularly (e.g., monthly, or more frequently in dusty environments) by rinsing it with water and allowing it to air dry completely before reinserting.
  • Ukuhlanza Ingaphandle: Sula ingaphandle leyunithi ngento ethambile, damp indwangu. Ungasebenzisi amakhemikhali anokhahlo noma izihlanzi ezilumayo.
  • Isitoreji: If storing the unit for an extended period, ensure it is clean and dry. Disconnect the power cord and drain any remaining water from the unit and hose.

7. Ukuxazulula izinkinga

Bheka lesi sigaba ngezinkinga ezivamile nezisombululo zazo.

InkingaImbangela EngenzekaIsixazululo
Iyunithi ayivuliNo power; Power cord not securely plugged in; Circuit breaker tripped.Ensure unit is plugged into a 20A outlet; Check power cord connection; Reset circuit breaker.
No or low dehumidificationAir filter clogged; Humidity setting too high; Room temperature too low; Unit size too small for area.Clean air filter; Lower humidity setting; Ensure operating temperature is within 41-104℉ (5-40℃); Verify unit capacity matches room size.
Iyunithi isebenza ngokuqhubekayoHumidity setting is lower than ambient humidity; Continuous mode is active.Increase humidity setting or switch off continuous mode if not needed.
Ukuvuza kwamanziDrain hose is kinked or blocked; Drain hose not properly connected.Check and clear drain hose; Ensure secure connection of drain hose.
Iqhwa kuma-coilOperating in low temperatures.Auto defrost will activate. Allow the cycle to complete.

8. Imininingwane

IsiciImininingwane
IbhrendiANDTE
Igama LemodeliDE305
Moisture Removal (95℉, 90%RH)305 Pints/Day (38 Gallons/Day)
Moisture Removal (AHAM)130 Pints/Day (80℉, 60%RH)
Indawo YokumbozaKufika ku-9000 Square Feet
Amandla Okugeleza komoya417 Cubic Feet Ngomzuzu (CFM)
Umthombo wamandla120V ~ 60Hz
Amandla Alinganiselwe1700 Watts
Ikalwe okwamanje15 Amps
Ubukhulu bomkhiqizo (D x W x H)19"D x 22"W x 31"H
Isisindo sento96 Amakhilogremu
Ibanga Lokushisa Lokusebenza41-104℉ (5-40℃)
Ububanzi Besilungiselelo Somswakama10% - 98% (±1%)
IsiqandisiR32
Izici ezikhethekileAuto Defrost, Auto Restart, Continuous Operation, Timer
Dimensions of the ANDTE 305 Pint Commercial Dehumidifier: 31 inches high, 19 inches deep, 22 inches wide.

Physical dimensions of the dehumidifier.

Detailed specifications for the DE320P dehumidifier including power, moisture removal, airflow, and operating conditions.

Comprehensive technical specifications for the dehumidifier.

9. Iwaranti kanye Nokusekela

ANDTE is committed to providing reliable quality products and services. We believe in quality and after-sales service.

Warranty services policy table: Refrigeration System (5 Years), Electronic components (3 Years), Consumable Accessories (1 Year), Overall Units (1 Year for functional failure, 30 Days for nonfunctional problem).

Detailed policy of warranty services for the ANDTE dehumidifier.

Ukufakwa kwewaranti:

  • Isistimu yesiqandisi: 5 Years (Compressor, Condenser, Evaporator - excluding labor and refrigerant).
  • Izingxenye ze-Electronic: 3 Years (Display screen, Mainboard, Signal cable - excluding labor).
  • Consumable Accessories: 1 Year (Drain hose, Filter, Handle, Screws - excluding labor).
  • Overall Units: 1 Year for functional failure, defect, or inferior workmanship.
  • Overall Units: 30 Days for nonfunctional problems.

Warranty coverage starts from the next day of delivery. For issues beyond the time limit, paid services may be provided.

Ukwesekwa Kwamakhasimende:

If you have any questions or require support, please do not hesitate to contact us. We aim to reply within 12 hours and assist you in resolving any problems.

Ulwazi lokuxhumana:

© 2024 ANDTE. All rights reserved.