1. Isingeniso
This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your AMANSON H07 ATX Mid Tower PC Case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe operation. Keep this manual for future reference.

Figure 1.1: AMANSON H07 ATX Mid Tower PC Case with illuminated internal components.
2. Ulwazi Lokuphepha
- Always disconnect the power supply from the wall outlet before performing any installation or maintenance inside the PC case.
- Handle all components with care to prevent damage.
- Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to sensitive electronic components.
- Gcina izingxenye ezincane nezinto zokupakisha kude nezingane.
- Qinisekisa ukungena komoya ngendlela efanele eduze kwekesi le-PC ukuvimbela ukushisa ngokweqile.
3. Okuqukethwe Kwephakheji
Qinisekisa ukuthi zonke izinto zikhona kuphakheji:
- AMANSON H07 ATX Mid Tower PC Case
- Ibhokisi Lezesekeli (izikulufo, izikhonkwane zokuma, izibopho zekhebula, njll.)
- Incwadi Yomsebenzisi (le dokhumenti)
4. Ingxenye Overview
The AMANSON H07 PC case features a panoramic design with tempered glass panels for full visibility of your internal components. It supports various motherboard sizes and extensive cooling configurations.

Figure 4.1: Top I/O Panel with power button, USB 3.0, USB 2.0, and audio ports.
The top I/O panel includes:
- Inkinobho Yamandla
- Setha kabusha Inkinobho
- 2x USB 2.0 Izimbobo
- 1x USB 3.0 Imbobo
- Audio In/Out Jacks
5. Ukusetha nokufakwa
5.1. Ukulungisa Icala
The AMANSON H07 features tool-less hinged tempered glass side panels for easy access. Gently open the side panel by pulling it from the rear edge. The panels can also be removed by lifting them off their hinges for full access during installation.

Figure 5.1: Hinged tempered glass side panel for easy access.
5.2. Ukufakwa kwe-Motherboard
The H07 supports E-ATX, ATX, Micro-ATX, and ITX motherboards. Install the necessary standoffs for your motherboard form factor. Carefully align your motherboard with the standoffs and I/O shield, then secure it with screws.

Figure 5.2: Motherboard and cooling component placement options.
5.3. Ukufakwa Kwempahla Yamandla
Install your power supply unit (PSU) into the dedicated compartment at the bottom rear of the case. Secure it with screws from the rear of the case.
5.4. Ukufakwa Kwedivayisi Yesitoreji
The case provides multiple mounting points for storage devices. Install your 3.5" HDDs and 2.5" SSDs into the designated trays and mounting locations. Refer to the case diagram for specific locations.

Figure 5.3: Storage drive mounting options for HDDs and SSDs.
5.5. Expansion Card (GPU) Installation
Remove the necessary PCI-E slot covers from the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCI-E slots and secure them with screws.
5.6. Ukuphathwa Kwentambo
Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and maintains a clean aesthetic.
6. Iziqondiso Zokusebenza
6.1. Ukuvula/Ukucisha
Press the power button located on the top I/O panel to turn on your PC. To shut down, use the operating system's shutdown function or press and hold the power button for several seconds.
6.2. Using Front I/O Ports
Connect USB devices to the USB 2.0 or USB 3.0 ports. Use the audio jacks for headphones, microphones, or speakers.
7. Isondlo
7.1. Ukuhlanza
Regularly clean the exterior of the case with a soft, damp cloth. For internal cleaning, use compressed air to remove dust from fans and components. Ensure the PC is powered off and unplugged before cleaning.
7.2. Izihlungi Zothuli
The AMANSON H07 may include removable dust filters. Clean these filters periodically to maintain optimal airflow and cooling performance.
8. Ukuxazulula izinkinga
- PC does not power on: Check all power connections, including the PSU to the wall, the PSU to the motherboard, and the front panel power switch cable to the motherboard.
- Izinkinga zokushisa ngokweqile: Ensure all fans are properly installed and functioning. Verify that dust filters are clean and not obstructing airflow. Check thermal paste application on CPU cooler.
- Ama-port e-USB awasebenzi: Confirm that the front panel USB cables are correctly connected to the motherboard headers.
- Audio jacks not working: Verify that the front panel audio cable is correctly connected to the motherboard's audio header.
9. Imininingwane
Below are the technical specifications for the AMANSON H07 PC Case:
| Isici | Imininingwane |
|---|---|
| Imodeli | H07 |
| Uhlobo Lwekesi | Mid Mid |
| Ukuhambisana kwe-Motherboard | E-ATX, ATX, Micro ATX, ITX |
| Okubalulekile | Ingilazi Epholile |
| Ubukhulu bomkhiqizo (LxWxH) | 19.69 x 13.78 x 19.69 amayintshi (500 x 350 x 500 mm) |
| Isisindo sento | 24.2 amakhilogremu |
| Inombolo yezimbobo ze-USB 2.0 | 2 |
| Inombolo yezimbobo ze-USB 3.0 | 1 |
| Number of Expansion Slots | 8 |
| Indlela Yokupholisa | Umoya |
| Uhlobo Lokufaka Ukunikezwa Kwamandla | Intaba Ephansi |

Figure 9.1: AMANSON H07 PC Case dimensions (520mm height, 510mm length, 250mm width).
10. Ulwazi Lwewaranti
Please refer to the product packaging or the official AMANSON webindawo yemigomo nemibandela ethile yewaranti. Gcina ubufakazi bakho bokuthenga ngezimangalo zewaranti.
11. Ukusekela
For technical assistance or customer support, please visit the official AMANSON website or contact their customer service department. Contact details can typically be found on the product packaging or the brand's webindawo.