Isingeniso
Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lamp. Sicela uyifunde ngokucophelela ngaphambi kokuyisebenzisa futhi uyigcine ukuze uyibhekise esikhathini esizayo.
The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.
Ulwazi Lokuphepha
Ukuze uqinisekise ukusebenza okuphephile futhi uvimbele umonakalo, sicela uqaphele lezi zinyathelo zokuphepha ezilandelayo:
- Ukusetshenziswa Kwangaphakathi Kuphela: Lokhu lamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Ukuphepha Kagesi: Qinisekisa ukuthi i-lamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
- Isexwayiso sokushisa: Abakwa-lamp and its contents become hot during operation. Do not touch the glass or base while the lamp is on or immediately after turning it off. Allow sufficient time for cooling.
- Ukubekwa Okuzinzile: Beka i-lamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
- Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
- Zigcine Kude Nezingane Nezilwane Ezifuywayo: Due to the heat generated, keep the lamp ngaphandle kwezingane nezilwane ezifuywayo.
- Ukungenisa umoya: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
- Intambo Elimele: Uma intambo kagesi ilimele, kufanele ishintshwe umenzi noma i-ejenti yesevisi eqeqeshiwe ukuze kugwenywe izingozi.
Okuqukethwe Kwephakheji
Qinisekisa ukuthi zonke izingxenye zikhona lapho kukhishwa:
- 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
- 1 x 30-Watt Incandescent Bulb (E17 base)
Setha
Follow these steps to set up your Jambo Liquid Motion Lamp:
- Khipha: Susa ngokucophelela zonke izingxenye ephaketheni.
- Ukufakwa Kwebhabhu: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
- Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
- Namathisela i-Cap: Place the decorative cap onto the top of the glass vessel.
- Isikhundla Lamp: Beka okuhlanganisiwe lamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
- Xhuma Amandla: Plug the power cord into a standard 120-volt electrical outlet.
Imiyalelo yokusebenza
Operating your Jambo Liquid Motion Lamp iqondile:
- Vula: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
- Isikhathi Sokufudumala: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
- Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
- Ubude besikhathi sokusebenza: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
- Vala: Ukuvala i-lamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
Isondlo
Proper care will ensure the longevity and performance of your lamp:
- Ukuhlanza: Qinisekisa ukuthi i-lamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the lamp emanzini.
- Ukushintshwa kwe-Bulb: If the bulb burns out, unplug the lamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
- Isitoreji: Uma ugcina i-lamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
- Ungavuli: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.
Ukuxazulula inkinga
If you encounter issues with your Jambo Liquid Motion Lamp, bheka izinkinga nezixazululo ezilandelayo ezivamile:
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Lamp ayivuli. | No power, faulty bulb, or loose connection. | Hlola ukuthi i-lamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out. |
| Wax is not moving or moving slowly. | Insufficient warm-up time, cold room temperature, or incorrect bulb wattage. | Allow 2-4 hours for the lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type. |
| Liquid is cloudy. | Initial cloudiness, lamp shaken, or improper storage. | Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support. |
| Wax is stuck at the top or bottom. | Not fully warmed up, lamp tilted, or excessive heat/cold. | Qinisekisa ukuthi i-lamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas. |
Imininingwane
Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):
| Isici | Imininingwane |
|---|---|
| Inombolo Yemodeli | I-KL-217 |
| Ubukhulu (D x W x H) | 11.4 cm x 11.4 cm x 39.4 cm (cishe 4.5 x 4.5 x 15.5 amayintshi) |
| Ukuphakama Komthunzi | 16 amayintshi |
| Umthombo wamandla | I-Corded Electric |
| Voltage | 120 volts |
| Wattage | 30 Watts |
| Uhlobo Lwebhabhu | I-incandescent |
| I-Bulb Base | E17 |
| Shintsha Uhlobo | I-Rotary |
| Izinto eziyisisekelo | I-Aluminium |
| I-Shade Material | Ingilazi |
| Qeda Uhlobo | Insimbi |
| Ukusetshenziswa Kwangaphakathi/Kwangaphandle | Ngasendlini |
| Izinga Lokumelana Namanzi | Ayingenwa amanzi |
| I-UPC | 850019692297 |
Iwaranti kanye Nokusekela
Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo webindawo yolwazi lokuxhumana.