AeroCool HEXFORMBKV2 Micro ATX PC Case Instruction Manual

1. Umkhiqizo Uphelileview

The AeroCool HEXFORMBKV2 is a high-performance Micro ATX PC case designed for optimal ventilation and a modern aesthetic. It features a tempered glass side panel to showcase your internal components and a stylish front panel that highlights the included FRGB fans. This mini-tower case supports efficient air and liquid cooling solutions.

Izici Eziyinhloko:

• High-Performance Mini-Tower: Front panel designed for effective cooling, showcasing three fixed RGB fans.
• Expansive Cooling Support: Includes 3 FRGB fans (2 front, 1 rear) and supports liquid cooling at the front and rear.
• Micro ATX Compatibility: Supports Micro-ATX and Mini-ITX motherboards, CPU coolers up to 159 mm, and high-performance graphics cards up to 296 mm (without front radiator).
• Multimedia Access: Top panel features 1x USB 3.0 port, 2x USB 2.0 ports, microphone and HD audio jacks, and Reset/Power buttons.

2. Imininingwane

3. Umhlahlandlela wokusetha

Follow these steps to properly install your components into the AeroCool HEXFORMBKV2 PC case.

3.1 Ukuqaqa

1. Susa ngokucophelela ibhokisi le-PC ephaketheni lalo.
2. Remove any protective films or internal packaging materials.
3. Beka ikesi endaweni eqinile, eyisicaba.

3.2 Ukufakwa Kwebhodi Yomama

1. Remove the tempered glass side panel by unscrewing the thumb screws.
2. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
3. Align your Micro ATX or Mini-ITX motherboard with the standoffs inside the case.
4. Vikela i-motherboard usebenzisa izikulufu ezinikeziwe.

3.3 Ukufakwa Kokunikezwa Kwamandla

1. Locate the power supply mounting area at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the designated bay.
3. Vikela i-PSU ngezikulufo ngemuva kwekesi.

3.4 Ukufakwa Kwedrayivu Yesitoreji

1. Identify the 3.5-inch drive bays within the case.
2. Mount your hard drives or SSDs into the appropriate bays and secure them with screws.

3.5 Expansion Card (GPU) Installation

1. Susa izembozo zesikhala sokunweba ezidingekayo ngemuva kwekesi.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Ensure the card is seated correctly and secure it with a screw. Note the maximum GPU length of 296 mm (without front radiator).

3.6 Uhlelo Lokupholisa

The case comes with three pre-installed 120mm FRGB fans (two at the front, one at the rear). Additional fans or liquid cooling radiators can be installed as needed. Ensure proper airflow direction for optimal cooling.

3.7 Ukuphathwa Kwekhebula

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

4. Iziqondiso Zokusebenza

4.1 Ukuvula / Ukuvula

• To power on your PC, press the Amandla inkinobho etholakala kuphaneli ephezulu.
• To power off, either shut down through your operating system or press and hold the Amandla inkinobho imizuzwana embalwa.

4.2 Front Panel I/O Ports

The top panel provides convenient access to various ports:

• Imbobo ye-USB 3.0 (x1): Ngokudlulisa idatha ngesivinini esikhulu.
• Izimbobo ze-USB 2.0 (x2): Okokuxhuma ama-peripherals.
• Imakrofoni Jack: Okokufaka komsindo.
• HD Audio Jack: For audio output (headphones/speakers).
• Setha kabusha Inkinobho: To restart the system. Note: This button may also cycle through FRGB lighting effects if connected to a compatible controller.

4.3 FRGB Fan Control

The pre-installed FRGB fans offer fixed RGB lighting. If your motherboard supports RGB control, you may be able to synchronize or change lighting effects via motherboard software. Otherwise, the Reset button might cycle through pre-set effects if wired accordingly.

5. Isondlo

Ukugcinwa njalo kusiza ukuqinisekisa ukusebenza kahle kanye nobude besikhathi sezingxenye ze-PC yakho.

5.1 Ukuhlanza Isihlungi Sothuli

• The HEXFORMBKV2 features a mesh front panel and a top panel with a magnetic dust filter.
• Periodically remove and clean these filters to prevent dust buildup, which can hinder airflow and cooling efficiency.
• Use compressed air or a soft brush to remove dust.

5.2 Ukuhlanza Okujwayelekile

• Sula ingaphandle lekesi ngomshini othambile, damp indwangu. Gwema izinto zokuhlanza abrasive.
• For the tempered glass panel, use a glass cleaner and a microfiber cloth to prevent scratches.

6. Ukuxazulula izinkinga

If you encounter issues with your PC case, consider the following common troubleshooting steps:

• Awekho Amandla: Ensure all power cables (PSU to wall, PSU to motherboard, PSU to components) are securely connected. Check the power switch on the PSU.
• Abalandeli Abaphenduki/I-RGB Ayisebenzi: Verify that the fan power cables and RGB cables are correctly connected to the motherboard or a fan/RGB controller. Consult your motherboard manual for proper header connections.
• Ukushisa ngokweqile: Ensure all fans are spinning correctly and are oriented to provide adequate airflow (intake/exhaust). Clean dust filters regularly. Check CPU cooler and GPU temperatures using monitoring software.
• Front Panel Ports Not Working: Check that the front panel I/O cables (USB, Audio, Power/Reset) are correctly connected to the corresponding headers on your motherboard.

For more complex issues, consult the manuals for your individual PC components (motherboard, GPU, PSU) or seek professional assistance.

7. Iwaranti kanye Nokusekela

7.1 Ulwazi Lwewaranti

The AeroCool HEXFORMBKV2 PC case comes with a Iwaranti yonyaka ongu-2 for parts. Please retain your proof of purchase for warranty claims.

7.2 Ukwesekwa Kwezobuchwepheshe

For technical assistance, product inquiries, or warranty claims, please visit the official AeroCool website or contact their customer support. You can typically find contact information on the manufacturer's webindawo noma emaphaketheni omkhiqizo.

• AeroCool Official Webindawo: www.aerocool.io
• I-imeyili Yokusekela Amakhasimende: support@aerocool.io (Eksample, please verify on official webindawo)