REBEL RB-0003 3-in-1 Detector User Manual
Imodeli: RB-0003
1. Isingeniso
Thank you for choosing the REBEL RB-0003 3-in-1 Detector. This device is designed to assist you in safely locating metal, wood, and live AC cables hidden within walls, ceilings, and floors. Please read this manual thoroughly before operating the device to ensure safe and effective use.
The RB-0003 is an essential tool for DIY enthusiasts and professionals, providing accurate detection to prevent damage during drilling, cutting, or renovation projects.
2. Ulwazi Lokuphepha
- Always exercise caution when working near detected objects.
- Do not rely solely on the detector for safety. Always verify findings with other methods if possible, especially when dealing with electrical wires.
- Gcina idivayisi yomile futhi ihlanzekile. Ungayibeki emswakama noma emazingeni okushisa aphezulu.
- Ungazami ukuvula noma ukuguqula idivayisi. Ukulungisa kufanele kwenziwe kuphela ngabasebenzi abaqeqeshiwe.
- Susa amabhethri uma idivayisi ingeke isetshenziswe isikhathi eside.
3. Umkhiqizo Uphelileview
Familiarize yourself with the components of your REBEL RB-0003 detector:
Umfanekiso 1: Ngaphambili view of the REBEL RB-0003 Detector in packaging. The device features a large display and a 'SELECT' button for mode switching.
Umfanekiso 2: Ngemuva view of the REBEL RB-0003 Detector. This view shows the battery compartment and the product information label.
- Isikrini sokubonisa: Shows detection mode, signal strength, and low battery indicator. (Display size: 51 x 25 mm)
- Inkinobho yokukhetha: Used to switch between detection modes (Metal, Wood, AC Cable).
- Indawo yenzwa: Located on the back of the device, this area must be flush against the surface for accurate readings.
- Igumbi Lebhethri: Located on the back, for battery installation.
4. Setha
4.1. Ukufakwa kwebhethri
- Open the battery compartment cover on the back of the device (refer to Figure 2).
- Faka amabhethri adingekayo, uqinisekise ukuthi i-polarity ilungile (+/-). Idivayisi idinga amabhethri ukuze isebenze.
- Vala ikhava yengxenye yebhethri ngokuphephile.
The device features a low battery indicator on the display. Replace batteries promptly when this indicator appears to ensure accurate readings.
5. Iziqondiso Zokusebenza
5.1. Ukusebenza Okujwayelekile
- Press the power button (if available, otherwise the SELECT button usually powers it on) to turn on the device.
- Cindezela inkinobho KHETHA button to cycle through the detection modes: Metal, Wood, and AC Cable. The selected mode will be indicated on the display.
- Place the detector flat against the surface you wish to scan. Ensure the sensor area is in full contact.
- Slowly slide the detector across the surface. The display will show signal strength and indicate when an object is detected.
5.2. Metal Detection
In Metal detection mode, the RB-0003 can detect metal parts in walls up to a depth of 30 mm.
- Select the Metal detection mode.
- Move the device slowly across the surface. The display will show increasing bars as it approaches a metal object.
- A distinct audio alert or visual indicator will confirm the presence of metal.
5.3. Wood Detection
The device can detect wooden profiles with a maximum dimension of 30 x 30 mm at a depth of 18 mm.
- Switch to Wood detection mode.
- Scan the wall slowly. The detector will indicate the edges and center of wooden studs or beams.
- Mark the detected areas for reference.
5.4. AC Cable Detection
The RB-0003 is capable of detecting live AC 90-250V cables.
- Select the AC Cable detection mode.
- Move the detector slowly over the area. The device will emit a warning and display an icon when live AC voltage itholakele.
- Isexwayiso: Always assume wires are live until confirmed otherwise by a qualified electrician.
6. Isondlo
- Ukuhlanza: Sula idivayisi ngendwangu ethambile, eyomile. Ungasebenzisi izinto zokuhlanza abrasive noma izincibilikisi.
- Isitoreji: Store the detector in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Ukushintshwa Kwebhethri: Replace batteries when the low battery indicator appears on the display. Use only the specified battery type.
7. Ukuxazulula izinkinga
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Idivayisi ayivuli. | Amabhethri afile noma afakwe ngokungalungile. | Hlola i-polarity yebhethri noma shintsha amabhethri. |
| Ukufundwa okungalungile. | Low battery, improper contact with surface, or environmental interference. | Replace batteries. Ensure the device is flat against the surface. Avoid scanning near strong electromagnetic fields. |
| No detection in AC mode. | Wires are not live, or too deep. | Ensure power is on to the circuit. Scan slowly and thoroughly. |
8. Imininingwane
| Isici | Imininingwane |
|---|---|
| Inombolo Yemodeli | RB-0003 (MIE-RB-0003) |
| Ibhrendi | HLOBUKA |
| Metal Detection Depth | Kufika ku-30 mm |
| Wood Detection Depth | Up to 18 mm (for 30x30 mm profiles) |
| AC Cable Detection | 90-250V |
| Usayizi Wokubonisa | 51 x 25 mm |
| Inkomba Yebhethri Eliphansi | Yebo |
| Umthombo wamandla | Isebenza Ibhethri |
| Ubukhulu bomkhiqizo | 15.5 x 5.4 x 2.7 cm |
| Isisindo sento | 157 amagremu |
| Isilinganiso sokuvikela samazwe ngamazwe | IP66 |
9. Iwaranti kanye Nokusekela
REBEL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official REBEL webindawo.
For technical support, troubleshooting assistance, or spare parts, please contact your local REBEL dealer or customer service department. Contact information can typically be found on the product packaging or the official REBEL webindawo.