1. Isingeniso
Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.
Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.
2. Yini EseBhokisini
Sicela uhlole okuqukethwe kwephakheji ukuze uqinisekise ukuthi zonke izinto zikhona:
- 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
- 1 x 44-Ukhiye wesilawuli kude se-IR
- 1 x 24V Power Adapter (US Plug)
3. Ulwazi Lokuphepha
Read all safety instructions before installation and use. Keep this manual for future reference.
- Ukusetshenziswa Kwangaphakathi Kuphela: This product is designed for indoor use and is not waterproof.
- Ukunikezwa kwamandla kagesi: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
- Indawo Yokufaka: Ensure the installation surface is clean, dry, and smooth for optimal adhesive performance.
- Ukusika I-Strip: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
- Gwema ukushisa ngokweqile: Do not coil the LED strip tightly when powered on, as this can cause overheating.
- Izingane Nezilwane ezifuywayo: Gcina umkhiqizo kanye nezingxenye zawo kude nezingane nezilwane ezifuywayo.
4. Ukusetha nokufakwa
Landela lezi zinyathelo ukuze ufake kahle:
- Lungiselela ubuso: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
- Kala futhi Unqume (uma kudingeka): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
- Attach the Strip: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
- Xhuma Amandla: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
- Yenza kusebenze isilawuli kude: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.
Figure 2: Visual guide for LED strip installation steps.
Figure 3: Connection diagram and remote activation.
Figure 4: 3M Adhesive and Fixing Clips.
5. Iziqondiso Zokusebenza
Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.
Figure 5: 44-Key IR Remote Control Layout.
Imisebenzi yesilawuli kude:
- Khanyisa cisha: Power button to turn the lights on or off.
- Ukulungiswa Kokukhanya: Sebenzisa i- ↑ futhi ↓ izinkinobho zokwandisa noma ukunciphisa ukukhanya.
- Ukukhetha Umbala: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
- Imibala Yokuzenzela: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Cindezela u-a I-DIY inkinobho.
- Sebenzisa i- ↑ futhi ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Cindezela okufanayo I-DIY button again to save your custom color.
- Ukukhetha Imodi: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- I-FLASH: Jumps between colors.
- FADE3/FADE7: Fades between 3 or 7 colors.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- OKUZENZAKALELAYO: Cycles through all modes.
- SHESHA/KUNENZA: Ilungisa isivinini samamodi aguqukayo.
Figure 6: Remote control in use for ambient lighting.
6. Isondlo
Proper maintenance ensures the longevity of your LED strip lights.
- Ukuhlanza: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
- Isitoreji: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
- Gwema Ukugoba: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.
7. Ukuxazulula izinkinga
Uma uhlangabezana nezinkinga, bheka izinkinga ezilandelayo nezisombululo:
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Izibani azikhanyi. |
|
|
| Isilawuli-kude asiphenduli. |
|
|
| Imibala ayilungile noma ayihambisani. |
|
|
8. Imininingwane
| Isici | Imininingwane |
|---|---|
| Ibhrendi | Uchoko |
| Inombolo Yemodeli | PR410116-RGB-US |
| Uhlobo Lomthombo Wokukhanya | I-LED (5050 SMD) |
| Umbala Okhanyayo | RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors |
| Ubude | 39.4 ft (12m) |
| Voltage | 24 Volts (Power Adapter) |
| Wattage | 18 Watts (Ihambisana Ubukhulu) |
| Indlela Yokulawula | 44-Key IR Remote Control |
| Isici Esikhethekile | Color Changing, Dimmable, 8 Dynamic Modes |
| Ukusetshenziswa Kwangaphakathi/Kwangaphandle | Kwangaphakathi Kuphela |
| Okubalulekile | Ithusi, Ipulasitiki |
| Isisindo sento | 9.6 amakhilogremu |
| Inkomba Yokunikeza Umbala (CRI) | 85.00 |
Figure 7: ETL Listed 24V Power Adapter.
9. Iwaranti & Ukusekela
Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro webindawo.
Ulwazi lokuxhumana:
- Webindawo: www.lepro.com (Sicela uhlole isikhulu webiwebhusayithi ukuze uthole ulwazi lokuxhumana olusha kakhulu.)
- I-imeyili: Bheka ukupakishwa komkhiqizo noma webindawo.