Isingeniso
This manual provides essential information for the safe and effective operation and maintenance of your DEWALT D36000S 10-Inch Wet Tile Saw with Stand. Please read and understand all instructions before use to ensure proper function and to prevent injury.
The DEWALT D36000S is a high-capacity wet tile saw designed for professional tile installation. It offers a 37-inch rip cut capacity (41 inches with plunge) and an 8-1/2 inch crosscut capacity, suitable for various tile sizes including 36x36 inch tiles ripped in half, 6-inch sills, and 8x48 inch planks at a 30% offset. The integrated water tray system helps contain mess, making it suitable for indoor use. The saw and stand are designed for portability, weighing approximately 91 lbs.
Ulwazi Lokuphepha
Landela njalo izinyathelo zokuphepha eziyisisekelo ukuze unciphise ingozi yomlilo, ukushaqeka kukagesi, kanye nokulimala komuntu. Gcina indawo yakho yokusebenza ihlanzekile futhi ikhanya kahle. Ungasebenzisi amathuluzi kagesi ezindaweni eziqhumayo, njengalapho kukhona uketshezi oluvuthayo, amagesi, noma uthuli. Gcina izingane nabantu ababukele kude ngenkathi usebenzisa ithuluzi likagesi.
Ukuphepha Kagesi
- Ensure the power cord is compatible with the power source and is properly grounded.
- Gwema ukuthintana nomzimba ngezindawo ezifakwe phansi ezifana namapayipi, ama-radiator, amabanga kanye neziqandisi.
- Ungawavezi amathuluzi kagesi emvuleni noma ezimeni ezimanzi. Amanzi angena ethuluzini lamandla azokwandisa ingozi yokushaqeka kukagesi.
- Ungayisebenzisi kabi intambo. Ungalokothi usebenzise intambo ekuphatheni, ekudonseni, noma ekukhipheni ithuluzi lamandla. Gcina intambo ikude nokushisa, uwoyela, imiphetho ebukhali, noma izingxenye ezihambayo.
Ukuphepha Komuntu Siqu
- Gqoka njalo isivikelo samehlo (izibuko zokuphepha noma izibuko zamehlo) kanye nesivikelo sokuzwa.
- Wear appropriate clothing. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
- Hlala uqaphile, bukela okwenzayo, futhi usebenzise ingqondo lapho usebenzisa ithuluzi lamandla.
- Ungeqisi. Gcina izinyawo ezifanele futhi ulinganise ngaso sonke isikhathi.
Saw Specific Safety
- Always ensure the blade guard is in place and functioning correctly.
- Use only blades recommended for wet cutting of tile and masonry.
- Never attempt to cut material freehand. Always use the rip fence or miter guide.
- Ensure the water pump is submerged and functioning to provide adequate cooling and dust suppression during operation.
- Disconnect power before changing blades or performing any maintenance.
Izingxenye
The DEWALT D36000S Wet Tile Saw includes the following components:
- D36000 Wet Tile Saw Unit
- D24001 Stand
- DW4764 Porcelain Tile Blade
- Iphampu Yamanzi Engaphansi
- I-Pan Yamanzi
- Side Water Trays
- Rear Water Trays
- Cutting Cart Side Extension
- Angle/Rip Guide
- Ukudonsa kweBlade
- I-Hex Wrench
Setha
Proper setup is crucial for safe and accurate operation.
1. Assemble the Stand
Unfold the D24001 stand and ensure all locking mechanisms are securely engaged. Place the stand on a firm, level surface.
2. Mount the Saw to the Stand
Carefully lift the D36000 saw unit and align it with the mounting points on the stand. Secure the saw to the stand using the provided hardware. Ensure the saw is stable and does not wobble.
Figure 1: Fully assembled DEWALT D36000S Wet Tile Saw on its stand.
3. Install Water Trays and Pump
Attach the water pan, side water trays, and rear water trays to the saw unit. Ensure they are properly seated to prevent leaks. Place the submersible pump into the water pan and connect its hose to the saw's water delivery system.
Umfanekiso 2: Phezulu-phansi view of the saw, illustrating the placement of the water trays for effective water management.
4. Install Blade
Ensure the saw is unplugged. Use the blade wrench to loosen the arbor nut. Install the DW4764 Porcelain Tile Blade, ensuring the rotation direction matches the arrow on the saw. Tighten the arbor nut securely.
5. Fill Water Reservoir
Fill the water pan with clean water until the submersible pump is fully submerged and the water level is adequate for operation. Regularly check and refill the water during use.
Ividiyo 1: I-overview of the DEWALT D36000S Wet Tile Saw with Stand, demonstrating its features and setup.
Imiyalelo yokusebenza
Familiarize yourself with the saw's controls and cutting capabilities before beginning work.
1. Adjusting for Cuts
- I-Rip Cuts: For straight cuts along the length of the tile, use the rip fence. The saw offers a 37-inch rip cut capacity, extendable to 41 inches with plunge cuts. The 18-inch cutting clearance to the left of the blade allows for ripping 36x36 inch tiles in half.
- Crosscuts: For cuts across the width of the tile, use the miter guide. The saw has an 8-1/2 inch crosscut capacity, ideal for 6-inch sills and 8x48 inch planks at a 30% offset.
- Miter Cuts: Adjust the miter guide for angled cuts. The saw supports various miter angles.
Figure 3: Detail of the miter adjustment lever, allowing for precise angle settings for various cuts.
2. Ukwenza Ukusika
- Place the tile firmly against the rip fence or miter guide on the cutting cart.
- Ensure the water pump is running and water is flowing to the blade.
- Turn on the saw. Allow the blade to reach full speed before beginning the cut.
- Slowly and steadily push the cutting cart and tile through the blade. Do not force the cut.
- Maintain a firm grip on the tile throughout the cutting process.
- Once the cut is complete, turn off the saw and wait for the blade to stop before removing the tile.
Figure 4: The cutting cart lock mechanism, ensuring stability during precise cuts.
Isondlo
Regular maintenance ensures the longevity and performance of your tile saw.
1. Ukuhlanza
- After each use, disconnect the saw from power.
- Drain the water pan using the easy-to-remove plug.
- Rinse all water trays, the cutting cart, and the blade area to remove tile slurry and debris.
- Clean the submersible pump to prevent clogging.
- Wipe down all surfaces to prevent rust and buildup.
2. I-Blade Care
- Inspect the blade for wear, damage, or dullness before each use.
- Replace worn or damaged blades promptly. Refer to the 'Install Blade' section for replacement instructions.
- Store blades properly to prevent damage.
3. Ukuhlolwa Okujwayelekile
- Ngezikhathi ezithile hlola zonke izibophelelo zokuqina.
- Hlola intambo yamandla ukuze uthole noma yiziphi izimpawu zomonakalo.
- Ensure the cutting cart slides smoothly. Lubricate if necessary with a suitable lubricant.
Figure 5: Integrated storage for accessories like wrenches and the miter guide, located beneath the saw for convenience.
Ukuxazulula inkinga
Lesi sigaba sikhuluma ngezinkinga ezivamile ongahlangabezana nazo.
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| I-Saw ayiqali | Akukho mandla, iswishi enephutha, i-circuit breaker ekhubekile | Check power connection, test outlet, reset breaker, contact service if switch is faulty. |
| I-Blade ayigawuli kahle noma ayiwaqophi amathayili | Dull or incorrect blade, insufficient water flow, feeding too fast | Replace blade, ensure pump is working and water is flowing, reduce feed rate. |
| Water not flowing to blade | Clogged pump, kinked hose, low water level | Clean pump, check hose for obstructions, refill water pan. |
| Ukusikeka okungalungile | Loose fence/guide, worn blade, unstable setup | Tighten fence/guide, replace blade, ensure saw and stand are stable. |
Imininingwane
Key technical specifications for the DEWALT D36000S Wet Tile Saw:
- Inombolo Yemodeli: I-D36000S
- Umthombo wamandla: I-Corded Electric
- Imoto: 15 Amp, 1220 MWO
- Voltage: 120V
- Wattage: 1800 watts
- Isivinini: 4200 RPM
- I-Blade Diameter: 10 amayintshi
- Rip Cut Capacity: 37 inches (41 inches with plunge)
- Crosscut Capacity: 8-1/2 amayintshi
- Ukunemba: 1/32 inch over 30 inches
- Isisindo Sento: 91 Amakhilogremu
- Ubukhulu bento (L x W x H): 36"L x 31"W x 28.75"H
- I-Blade Material: Stainless Steel (for included blade)
- Isincomo Sobuso: I-Porcelain
- Izici ezikhethekile: Brake, Integrated storage, Water tray system
- Isitifiketi: UL
Iwaranti kanye Nokusekela
Ukuze uthole ulwazi lwewaranti, isevisi, noma ukwesekwa kobuchwepheshe, sicela ubheke i-DEWALT esemthethweni webisayithi noma xhumana nesevisi yamakhasimende e-DEWALT ngqo. Gcina irisidi lakho lokuthenga njengobufakazi bokuthenga kwezimangalo zewaranti.