ASHATA 2x2 Video Wall Controller Instruction Manual

1. Isingeniso

The ASHATA 2x2 Video Wall Controller is a device designed to split a single HDMI high-definition image into multiple segments for display across several screens, creating a larger video wall. This controller supports one HDMI input and four HDMI outputs, enabling various display configurations such as 2x2, 2x1, 3x1, 4x1, 1x2, 1x3, and 1x4.

This manual provides detailed instructions for the proper setup, operation, and maintenance of your video wall controller to ensure optimal performance and longevity.

Image: The ASHATA 2x2 Video Wall Controller shown with a 2x2 display configuration.

2. Ulwazi Lokuphepha

• Funda yonke imiyalelo ngokucophelela ngaphambi kokusebenzisa idivayisi.
• Ungalivezi idivayisi emanzini, umswakama, noma amazinga okushisa aphezulu.
• Use only the provided power adapter. Using an incorrect power supply may damage the device and void the warranty.
• Ungazami ukuvula noma ukulungisa idivayisi. Thumela zonke izinsiza kubasebenzi abaqeqeshiwe.
• Qinisekisa ukuthi kungena umoya ofanele eduze kocingo ukuze uvimbele ukushisa ngokweqile.

3. Okuqukethwe Kwephakheji

Sicela uqinisekise ukuthi zonke izinto ezibalwe ngezansi zifakiwe kuphakheji yakho:

• 1 x ASHATA 2x2 Video Wall Controller
• 1 x Isilawuli kude
• 1 x 12V Amandla Adapter
• 1 x Incwadi Yomsebenzisi (le dokhumenti)

Image: The video wall controller, remote control, and power adapter included in the package.

4. Izici zomkhiqizo

• 2x2 Video Wall Splicing: Divides a single HDMI input into four segments for display across four screens.
• Multiple Splicing Modes: Supports 2x2, 2x1, 3x1, 4x1, 1x2, 1x3, and 1x4 configurations.
• High Definition Support: Compatible with HDMI 1.3 input, supporting resolutions up to 1920 x 1080P at 60Hz output.
• Ukwakhiwa Okuqinile: Made of metal material for anti-interference, efficient heat dissipation, and extended service life.
• Xhuma futhi udlale: Easy to set up and operate without complex software installation.
• Ukusebenza Okuzinzile: Powered by 12V with over-current protection.
• Gold-Plated Interfaces: Reduces data loss and improves signal efficiency.

5. Idivayisi Ngaphezuluview

Iphaneli yangaphambili

• Isamukeli se-IR: Ngezimpawu zokulawula okude.
• Inkomba ye-LED: Indicates power and operational status.
• Inkinobho yomsindo: Controls audio output.
• Inkinobho yemodi: Cycles through different splicing modes.

Iphaneli yangemuva

Isithombe: Emuva view of the controller with input and output ports.

• Okokufaka kwe-HDMI: Connect your source device (e.g., computer, media player).
• Okukhiphayo kwe-HDMI (1-4): Connect to your display units (TVs, monitors).
• I-DC 12V: Imbobo yokufaka yamandla.

6. Remote Imisebenzi

The included remote control allows for convenient operation of the video wall controller.

Image: The remote control for the video wall controller.

• AMANDLA: Ivula noma ivale idivayisi.
• UMSINDO: Toggles audio output.
• ATTR++ / ATTR--: Adjusts image attributes (e.g., brightness, contrast).
• VAL++ / VAL--: Adjusts value for selected attribute.
• R: Rotates the image (if supported by the specific mode).
• SUKA: Resets settings to default.
• 2X2, 2X1, 1X2, 1X1: Direct buttons to select specific splicing modes. Other modes (3x1, 4x1, 1x3, 1x4) can be accessed via the 'Mode' button on the device or cycling through options.

7. Sethaphu Imiyalelo

1. Prepare Displays: Arrange your display units (TVs, monitors) in the desired configuration (e.g., 2x2, 1x4). Ensure all displays are powered off.
2. Connect HDMI Outputs: Connect HDMI cables from the HDMI Output ports (1-4) on the video wall controller to the HDMI Input ports on your display units. Match the outputs to the physical arrangement of your screens.
3. Connect HDMI Input: Connect an HDMI cable from your source device (e.g., PC, Blu-ray player) to the HDMI Input port on the video wall controller.
4. Xhuma Amandla: Plug the 12V power adapter into the DC 12V port on the controller, then plug the adapter into a power outlet.
5. Vula: Power on the video wall controller, then power on all connected display units.
6. Khetha Okokufaka: Ensure your display units are set to the correct HDMI input source.

8. Iziqondiso Zokusebenza

The video wall controller supports various splicing modes. You can select these modes using the remote control or the 'Mode' button on the device.

Selecting Splicing Modes:

• Ukusebenzisa isilawuli kude: Press the dedicated buttons (2X2, 2X1, 1X2, 1X1) for quick selection of common modes. For other modes, you may need to cycle through options using a mode selection button if available, or refer to specific remote functions for advanced configurations.
• Using Device Buttons: Press the 'Mode' button on the front panel of the controller to cycle through available splicing configurations.

The controller will automatically adjust the image to fit the selected display configuration.

Isithombe: I-Visual examples of different video wall splicing modes.

9. Isondlo

• Ukuhlanza: Use a soft, dry cloth to clean the surface of the device. Do not use liquid or aerosol cleaners.
• Ukungenisa umoya: Qinisekisa ukuthi izimbobo zokungena komoya azivaliwe ukuvimbela ukushisa ngokweqile.
• Isitoreji: Uma ingasetshenziswa isikhathi eside, gcina idivayisi endaweni epholile, neyomile kude nelanga eliqondile.

10. Ukuxazulula izinkinga

11. Imininingwane

12. Ukusekela

For any issues or questions regarding your ASHATA 2x2 Video Wall Controller, please contact our customer support. We are committed to providing assistance and ensuring your satisfaction.

Please refer to your purchase platform or product packaging for specific contact details.