I-Legrand 59002

Legrand 059002 Green'up Premium Three-Phase Charging Station User Manual

Imodeli: 59002

1. Umkhiqizo Uphelileview

The Legrand Green'up Premium three-phase charging station is designed for safe and efficient recharging of electric vehicles and plug-in hybrids. This station supports both Mode 2 and Mode 3 charging, accommodating vehicles equipped with single-phase and three-phase chargers. It complies with international standards IEC 61851-1 and IEC 61851-22, ensuring reliable and secure operation.

Legrand Green'up Premium Three-Phase Charging Station

Isithombe 1.1: Ngaphambili view of the Legrand Green'up Premium Three-Phase Charging Station.

2. Ukusetha nokufakwa

This section provides general guidelines for setting up your Legrand Green'up Premium charging station. For detailed installation instructions, please refer to the dedicated installation manual included in the product packaging. Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations.

2.1. Unpacking the Box

Carefully unpack all components and verify that all items are present.

  • Legrand Green'up Premium Charging Station
  • Installation Instructions (French, if applicable)

2.2. Mounting the Station

Choose a suitable location for mounting the charging station, ensuring it is protected from direct impact and adverse weather conditions if installed outdoors. The station should be mounted securely to a solid surface at an appropriate height for user access.

Ngemuva view of Legrand Green'up Premium Charging Station showing mounting points

Isithombe 2.1: Emuva view of the charging station, indicating potential mounting points or cable entry.

2.3. Uxhumano lukagesi

Connect the charging station to the electrical supply. This is a three-phase unit requiring a 32A supply. Ensure proper grounding and overcurrent protection are in place as per local regulations. Refer to the wiring diagrams in the installation manual for specific connection details.

3. Iziqondiso Zokusebenza

Follow these steps to safely charge your electric vehicle using the Legrand Green'up Premium charging station.

  1. Prepare Your Vehicle: Ensure your electric vehicle is parked safely and switched off.
  2. Open Charging Port: Open the charging port cover on your vehicle.
  3. Xhuma Ikhebuli yokushaja: Take the appropriate charging cable (not included with the station) and connect one end to the charging station's port.
  4. Close-up of Legrand Green'up Premium Charging Station port cover

    Image 3.1: Close-up of the charging station's port cover, ready for cable connection.

  5. Xhuma Emotweni: Connect the other end of the charging cable to your vehicle's charging port.
  6. Qalisa Ukushaja: The charging station will typically detect the connection and initiate the charging process automatically. Indicators on the station (if present) or your vehicle will show the charging status.
  7. Gada Ukushaja: Monitor the charging progress via your vehicle's dashboard or the station's indicators.
  8. Qeda Ukushaja: Once charging is complete, or if you need to stop charging, follow your vehicle's instructions to safely disconnect the cable from the vehicle first, then from the charging station.

Okubalulekile: Always ensure the charging cable is fully inserted and secured before initiating charging. Never force connections. If an error occurs, refer to the Troubleshooting section.

4. Isondlo

Regular maintenance ensures the longevity and safe operation of your charging station. Always disconnect power to the unit before performing any maintenance.

  • Ukuhlanza: Periodically clean the exterior of the charging station with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the charging port is free from dust, dirt, and moisture.
  • Ukuhlolwa Kwekhebula: Regularly inspect the charging cable (if permanently attached or your own) for any signs of damage, wear, or fraying. Replace damaged cables immediately.
  • Ukuhlolwa Kwechweba: Check the charging port for any foreign objects or damage. Ensure the protective cover (if applicable) is functioning correctly.
  • Ukuhlolwa Kochwepheshe: It is recommended to have the charging station inspected by a qualified electrician at least once a year to ensure all electrical connections are secure and the unit is operating safely.

5. Ukuxazulula izinkinga

This section addresses common issues you might encounter with your charging station. For more complex problems, contact a qualified electrician or Legrand customer support.

InkingaImbangela EngenzekaIsixazululo
No Power to StationI-circuit breaker ikhubekile; uxhumano lukagesi olukhululekile.Check the circuit breaker in your electrical panel and reset if tripped. Ensure all connections are secure (requires a qualified electrician).
Vehicle Not ChargingCable not fully connected; vehicle charging fault; station fault.Ensure the charging cable is securely connected to both the station and the vehicle. Check your vehicle's dashboard for error messages. Disconnect and reconnect the cable.
Ukushaja OkunensaVehicle settings; external factors (e.g., grid load); cable issue.Check your vehicle's charging settings. Ensure the charging cable is rated for the station's capacity. Consult your vehicle's manual.
Error Indicator Light OnInternal fault; external electrical issue.Disconnect the charging cable, then power cycle the station (turn off and on the circuit breaker). If the error persists, contact Legrand support.

6. Imininingwane Yezobuchwepheshe

IsiciImininingwane
IbhrendiI-Legrand
Inombolo Yemodeli59002 (Part Number: 059002)
Igama Lohlobo LomkhiqizoCar Charging Socket
Amandla22kw
Isilinganiso samanje32 A
VoltageThree-phase (specific voltage depends on regional supply, typically 400V AC)
Imodi yokushajaMode 3 (compatible with Mode 2 vehicles)
Amazinga AthobelayoI-IEC 61851-1, IEC 61851-22
Isisindo sento3.79 kg
Ivolumu20.40 amaminithi
Isikhathi Esilinganiselwe Sokushaja9 hours (dependent on vehicle battery capacity and state of charge)
OkubalulekileIpulasitiki

7. Iwaranti kanye Nokusekela

7.1. Iwaranti Yomkhiqizi

This Legrand Green'up Premium charging station is covered by a Iwaranti yomkhiqizi yonyaka ongu-2. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

7.2. Ukwesekwa Kwamakhasimende

For technical assistance, warranty claims, or further information, please contact Legrand customer support. Visit the official Legrand webindawo yemininingwane yokuxhumana eqondene nendawo yangakini.

Legrand Official Webindawo: www.legrand.com

Uma uxhumana nosekelo, sicela ube nenombolo yemodeli yomkhiqizo wakho (59002) kanye nobufakazi bokuthenga butholakale kalula.

© 2023 Legrand. All rights reserved. Information in this manual is subject to change without notice.

Amadokhumenti Ahlobene - 59002

Ngaphambiliview I-Legrand PDU Switched Node 0U, 1 Isigaba 32A, 20 C13 + 2C 19 Izindawo Zokukhiya, IEC 60309 - Ishidi Ledatha Lobuchwepheshe
Technical data sheet for the Legrand PDU Switched Node 0U, a 1-phase 32A power distribution unit featuring 20 C13 and 2 C19 locking outlets, designed for IT equipment in 19-inch enclosures. Details key features, specifications, input/output, controller, cascading modes, mechanical and environmental characteristics, mounting solutions, packaging, and standards.
Ngaphambiliview Legrand PDU HD Metered Base 0U: 32A, 20x C13 + 4x C19 - Technical Specifications
Detailed technical specifications for the Legrand PDU HD Metered Base 0U, a 1-phase 32A power distribution unit with 20 C13 and 4 C19 outlets, featuring cord locking, remote management, and environmental data.
Ngaphambiliview I-Legrand PDU HD Metered Node 0U 1 Isigaba 32A - 24 C13 + 12 C19 Izindawo Zokukhiya
Imininingwane yobuchwepheshe kanye nezici ze-Legrand PDU HD Metered Node 0U 1 Phase 32A, eyenzelwe imishini ye-IT efakwe ezindaweni ezingama-intshi angu-19, enikeza ukuqapha okude, ukulinganisa, kanye nokuxhumana okuthuthukisiwe.
Ngaphambiliview Legrand PDU HD Metered Node 0U 1 Phase 32A 36 C13 + 6 C19 with Locking - Technical Data
Technical data sheet for the Legrand PDU HD Metered Node, a 0U, single-phase, 32A power distribution unit with 36 C13 and 6 C19 outlets featuring cord locking. Includes specifications, features, installation, and compliance information.
Ngaphambiliview Isisekelo Esilinganisiwe se-Legrand PDU HD 0U: Isigaba 3 32A, 36 C13 + 6 C19 - Idatha Yobuchwepheshe
Ishidi ledatha lobuchwepheshe le-Legrand PDU HD Metered Base 0U, iyunithi yokusabalalisa amandla ye-32A enezigaba ezintathu enezindawo zokukhiya ezingu-36 C13 kanye nezingu-6 C19, equkethe imitha ethuthukisiwe, ukuxhumana okungenantambo, kanye ne-RS485 cascading yezindawo zesikhungo sedatha.
Ngaphambiliview Legrand PDU HD Metered Node 0U 1 Phase 32A with 20 C13 + 4 C19 Outlets
Technical specifications and features of the Legrand PDU HD Metered Node 0U, a 1-phase 32A Power Distribution Unit designed for data center rack cabinets, featuring 20 C13 and 4 C19 locking outlets, remote monitoring, and cascading capabilities.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.