Behringer DI800 V2 Signal Direct Box Instruction Manual

1. Isingeniso

The Behringer DI800 V2 is a professional 8-channel direct injection (DI) box designed to connect instruments or other audio sources directly to a mixing console or amplifier. It converts unbalanced, high-impedance signals into balanced, low-impedance signals, suitable for long cable runs without signal degradation. The DI800 V2 offers flexible power options, including mains power or phantom power from a mixing console, and features an ultra-flat frequency response for transparent audio reproduction.

2. Imiyalelo Yezokuphepha Ebalulekile

• Funda le miyalelo kahle ngaphambi kokusebenzisa idivayisi.
• Gcina le miyalo ukuze uyisebenzise esikhathini esizayo.
• Lalela zonke izixwayiso ngomkhiqizo kanye nebhukwana.
• Ungasebenzisi lesi sisetshenziswa eduze namanzi noma umswakama.
• Hlanza kuphela ngendwangu eyomile.
• Ungavimbi noma yiziphi izimbobo zokungenisa umoya. Faka ngokuhambisana nemiyalelo yomkhiqizi.
• Ungafaki eduze kwanoma yimiphi imithombo yokushisa njengama-radiator, amarejista okushisa, izitofu, noma ezinye izinto ezisetshenziswayo (okuhlanganisa ampama-lifiers) akhiqiza ukushisa.
• Ungayehluli injongo yokuphepha yepulaki eyenziwe nge-polarized noma ephansi. Ipulaki eyenziwe nge-polarized inama-blade amabili anelinye elibanzi kunelinye. Ipulaki yohlobo oluphansi inama-blade amabili kanye ne-flong yesithathu yaphansi. I-blade ebanzi noma i-prong yesithathu inikezwe ukuphepha kwakho. Uma ipulaki enikeziwe ingangeni endaweni yakho yokukhipha, thintana nomuntu osebenza ngogesi ukuze athathele indawo engasenamsebenzi.
• Vikela intambo yamandla ekuhanjweni ngayo noma ekuncinzweni, ikakhulukazi kumapulaki, ezintweni ezisetshenziswayo, kanye nendawo lapho ziphuma khona ezinsizeni.
• Sebenzisa kuphela okunamathiselwe/izinsiza ezicaciswe umenzi.
• Khipha lesi sisetshenziswa phakathi neziphepho zombani noma lapho singasetshenziswa isikhathi eside.
• Thumela zonke izinsiza kubasebenzi benkonzo abaqeqeshiwe. Ukuseviswa kuyadingeka lapho umshini wokusebenza ulimele nganoma iyiphi indlela, njengentambo yokuphakela amandla noma ipulaki lonakele, uketshezi luchithekile noma izinto ziwele emshinini, umshini uhlaselwe yimvula noma umswakama, awusebenzi ngendlela evamile. , noma ulahliwe.

3. Ukukhipha impahla kanye nokuhlola kokuqala

Upon receiving your Behringer DI800 V2, carefully unpack the unit and inspect it for any signs of damage that may have occurred during transit. If damage is found, contact your dealer immediately. The package should contain the DI800 V2 unit and a power cable. Ensure all components are present before proceeding with setup.

4. Setha

4.1 Iphaneli yangaphambili ngaphezuluview

Umfanekiso 1: Front panel of the Behringer DI800 V2. Each of the 8 channels features an input jack, a link output, a -20dB pad switch, and a ground lift switch. LED indicators show signal presence and phantom power status.

• INPUT (1-8): 1/4" TS/TRS input jacks for connecting instruments or line-level sources.
• LINK (1-8): 1/4" TS/TRS output jacks for connecting the input signal to an amplifier or monitor. This output is parallel to the input.
• -20dB PAD (1-8): Attenuates the input signal by 20dB. Use this for high-output sources to prevent clipping.
• GROUND LIFT (1-8): Disconnects the ground connection between the input and output, which can help eliminate hum or ground loops.
• AMANDLA Shintsha: Ivula noma ivale iyunithi.
• PHANTOM POWER LED: Illuminates when phantom power is detected on an XLR output.
• I-LED Eyisignali: Ikhanyisa uma isignali yokufaka ikhona.

4.2 Iphaneli yangemuva ngaphezuluview

Umfanekiso 2: Rear panel of the Behringer DI800 V2. It features eight balanced XLR outputs and the AC power input.

• BAL OUT (1-8): Balanced XLR outputs for connecting to a mixing console's microphone inputs.
• Okokufaka kwe-AC: Standard IEC power connector for connecting the included power cable.

4.3 Ukunika amandla iyunithi

The DI800 V2 can be powered in two ways:

1. Amandla amakhulu: Connect the supplied AC power cable to the AC INPUT on the rear panel and then to a suitable wall outlet.
2. Amandla Phantom: The unit can also be powered by 48V phantom power supplied from a mixing console via the XLR outputs. If phantom power is present on at least one XLR output, the unit will power on automatically. The PHANTOM POWER LED on the front panel will illuminate.

Qaphela: If both mains power and phantom power are connected, the unit will prioritize mains power. It is recommended to use mains power for consistent operation, especially if phantom power sources are unreliable or vary.

4.4 Izixhumanisi

• Connect your instrument (e.g., guitar, bass, keyboard) to an INPUT jack on the front panel using a 1/4" TS or TRS cable.
• If you need to send the signal to an amplifier or monitor on stage, connect a 1/4" TS or TRS cable from the corresponding LINK jack kweyakho ampokokufaka kwe-lifier.
• Xhuma i- BAL OUT XLR output on the rear panel to a microphone input on your mixing console using a balanced XLR cable.

5. Iziqondiso Zokusebenza

5.1 Ukugeleza Kwesignali

The DI800 V2 takes an unbalanced, high-impedance signal from your instrument, converts it to a balanced, low-impedance signal, and sends it to your mixing console. The LINK output provides a direct, unprocessed copy of the input signal for local monitoring.

5.2 Using the -20dB Pad

If your instrument or audio source has a very high output level, the input signal to the DI800 V2 might be too strong, leading to distortion. In such cases, engage the -20dB PAD switch for the corresponding channel. This will reduce the input signal level by 20 decibels, preventing clipping and ensuring a clean signal to the mixing console.

5.3 Ground Lift Function

Ground loops can cause an audible hum or buzz in your audio system. The UKUPHAKATHI KWEMHLABA switch disconnects the ground connection between the input and output stages of the DI800 V2. If you experience hum, try engaging the GROUND LIFT switch for the affected channel. This often resolves ground loop issues without affecting the audio signal.

5.4 Monitoring Signal Presence

I I-LED YOPHAWULELO for each channel illuminates when an audio signal is detected at the input. This provides a quick visual confirmation that your instrument is connected and sending a signal to the DI box.

6. Isondlo

• Ukuhlanza: Disconnect the unit from power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Isitoreji: Store the DI800 V2 in a cool, dry place away from direct sunlight and extreme temperatures.
• Isevisi: There are no user-serviceable parts inside the DI800 V2. Refer all servicing to qualified service personnel.

7. Ukuxazulula izinkinga

8. Imininingwane

9. Iwaranti

For detailed warranty information, please refer to the official Behringer website or contact Music Tribe US support. The warranty typically covers manufacturing defects for a specified period from the date of purchase. Keep your proof of purchase for warranty claims.

Incazelo Yesiqinisekiso: Musictribe. Support.

10. Ukusekela

If you encounter issues not covered in this manual or require further assistance, please visit the official Behringer support website or contact Music Tribe US customer service. You can find contact details and additional resources on their official webindawo.

Ukusekelwa Kwe-inthanethi: Music Tribe Support