Utilitech 38971

Utilitech 36-in Under Cabinet LED Light Bar Instruction Manual

Model: 38971 | Brand: Utilitech

Isingeniso

This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 36-inch Under Cabinet LED Light Bar. Please read this manual thoroughly before installation and keep it for future reference. This LED light bar is designed to provide efficient and warm white illumination for your indoor spaces, particularly under cabinets.

Ulwazi Lokuphepha

Sicela uqaphele lezi zinyathelo zokuphepha ezilandelayo ukuze uvimbele ukulimala noma ukulimala komkhiqizo:

  • Njalo nqamula amandla ku-circuit breaker ngaphambi kokufaka, ukusevisa, noma ukuhlanza.
  • Lo mkhiqizo wenzelwe ukusetshenziswa endlini kuphela. Do not expose to water or moisture.
  • Ensure all electrical connections comply with local codes and ordinances. If you are unsure, consult a qualified electrician.
  • Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
  • Avoid looking directly into the LED light source when it is illuminated, as it may cause eye strain.
  • Gcina izinto zokupakisha zikude nezingane.

Okuqukethwe Kwephakheji

Qinisekisa ukuthi zonke izingxenye zikhona ngaphambi kokuqala ukufakwa:

  • Utilitech 36-inch Under Cabinet LED Light Bar (1)
  • Ukulawula okudelekile (1)
  • I-Mounting Hardware (izikulufu, amahange)
  • Incwadi Yokufundisa (le dokhumenti)
Utilitech 36-inch Under Cabinet LED Light Bar

Image: The Utilitech 36-inch Under Cabinet LED Light Bar, showing its slim profile kanye nokuphela okumhlophe.

Ukusetha nokufaka

The Utilitech LED Light Bar is designed for semi-flush under-cabinet mounting. Follow these steps for proper installation:

  1. Lungiselela Indawo Yokufaka: Choose a suitable location under a cabinet. Ensure there is a power outlet nearby for the corded electric connection. Clean the mounting surface.
  2. Amaphuzu Okukhweza Maka: Hold the light bar in the desired position and mark the locations for the mounting screws. Use a pencil to mark through the mounting holes on the fixture.
  3. Drill Pilot Holes: Using an appropriate drill bit for your cabinet material, drill pilot holes at the marked locations. If mounting into drywall, use the provided wall anchors.
  4. Secure the Light Bar: Align the light bar with the pilot holes and secure it using the provided mounting screws. Ensure the fixture is firmly attached and level.
  5. Xhuma Emandleni: Plug the light bar's power cord into a standard 110-volt electrical outlet.

Qaphela: For a clean installation, consider routing the power cord discreetly using cable clips (not included) or by drilling a small hole through the cabinet if permissible and safe.

Imiyalelo yokusebenza

Your Utilitech LED Light Bar is controlled via the included remote control.

  • Vula/Vala: Cindezela inkinobho ON button on the remote to turn the light bar on. Press the VALIWE ukuyicisha.
  • Ukulungiswa Kokukhanya: Sebenzisa i- + futhi - buttons on the remote to increase or decrease the brightness of the light. The light bar provides up to 800 lumens of warm white light.
  • Ibanga lesilawuli kude: Ensure the remote control is pointed towards the light bar for optimal signal reception. The effective range may vary depending on obstacles.

Isondlo

The Utilitech LED Light Bar requires minimal maintenance.

  • Ukuhlanza: Before cleaning, ensure the light bar is unplugged from the power outlet. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as they may damage the finish.
  • Umthombo Wokukhanya kwe-LED: The LED light source is integrated and non-removable. It is designed for long-lasting performance and does not require bulb replacement.

Ukuxazulula inkinga

Uma uhlangabezana nezinkinga ngebha yakho yokukhanya, bheka izinkinga ezilandelayo nezisombululo:

InkingaImbangela EngenzekaIsixazululo
Ibha yokukhanya ayivuli.
  • Awekho amandla esitolo.
  • Isilawuli kude ibhethri ufile.
  • Remote control not paired or faulty.
  • Check the power outlet and circuit breaker.
  • Shintshanisa ibhethri yesilawuli kude.
  • Ensure remote is pointed at the light bar. If issues persist, contact customer support.
Ukukhanya kufiphele noma kuyacwayiza.
  • Ukusetha ukukhanya kuphansi.
  • Ukuxhumeka kwamandla okuxekethile.
  • Khulisa ukukhanya usebenzisa isilawuli kude.
  • Qinisekisa ukuthi intambo yamandla ixhunywe ngokuvikelekile.
Isilawuli kude asiphenduli.
  • Ibhethri lifile noma lifakwe ngendlela engafanele.
  • Obstruction between remote and light bar.
  • Replace battery and check polarity.
  • Susa noma yiziphi izithiyo.

Imininingwane

IsiciImininingwane
IbhrendiI-Utilitech
Inombolo Yemodeli38971
Ubukhulu bomkhiqizo36.5 x 3.25 x 1.5 amayintshi
Isisindo sento2.2 amakhilogremu
Umthombo wamandlaI-Corded Electric
Voltage110 volts
Wattage9.21 watts
Ukukhanya800 ilume
Umbala OkhanyayoOkumhlophe Okufudumele
Uhlobo Lomthombo WokukhanyaLED (Non-Removable)
Indlela YokulawulaIsilawuli kude
Uhlobo LokufakaSemi Flush Mount / Under Cabinet
Ukusetshenziswa Kwangaphakathi/KwangaphandleNgasendlini
Qeda UhloboIbhulashi
I-Shade MaterialInsimbi
Kudingeka UmhlanganoCha

Ulwazi Lwewaranti

This Utilitech product comes with a limited warranty. Please refer to the warranty card included with your product packaging for specific terms, conditions, and duration of the warranty. Keep your purchase receipt as proof of purchase for any warranty claims.

Ukwesekwa Kwamakhasimende

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Utilitech customer support. Contact information can typically be found on the product packaging or the manufacturer's official webindawo.

Umkhiqizi: I-Utilitech

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.