Legrand 1597TRW Tamper Resistant GFCI Wall Outlet User Manual

Isingeniso

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This device is part of the radiant collection, designed to offer reliable electrical protection in residential and commercial environments. Please read these instructions thoroughly before beginning installation or use.

Ulwazi Lokuphepha

WARNING: Risk of electric shock. May cause serious injury or death. Turn off power at the circuit breaker or fuse box before installation.

Always disconnect power at the service panel before working with electrical wiring.
Installation must be performed by a qualified electrician or in accordance with all local and national electrical codes.
Do not install in wet locations unless specifically rated for such use.
Qinisekisa ukuthi zonke izintambo zivikelekile futhi zigqunywe ngendlela efanele.
Test the GFCI outlet monthly to ensure proper operation.

Okuqukethwe Kwephakheji

Qinisekisa ukuthi zonke izingxenye zikhona ngaphambi kokuqala ukufakwa:

Legrand 1597TRW Tamper Resistant GFCI Wall Outlet (White)
Izikulufa zokukhwela
Incwadi Yokufundisa (le dokhumenti)

Note: A screwless wall plate is not included and must be purchased separately.

Ukufakwa

Follow these steps for proper installation of your GFCI outlet:

Vala Amandla: Locate the circuit breaker or fuse that supplies power to the outlet box. Turn it off completely. Verify power is off using a voltagumhloli.
Susa i-Old Outlet: Carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wires were connected to the "LINE" and "LOAD" terminals.
Khomba Izintambo:
- Izintambo Zomugqa: These wires bring power from the circuit breaker to the GFCI outlet.
- Izintambo Zomthwalo: These wires carry power from the GFCI outlet to other downstream receptacles or devices that you want to protect. If there are no downstream receptacles, cap the LOAD wires individually.
- Intambo Ephansi: Typically bare copper or green insulated.
Connect Wires to GFCI:
- Xhuma i- UMUGQA wires to the terminals marked "LINE" on the GFCI outlet.
- Xhuma i- layisha wires to the terminals marked "LOAD" on the GFCI outlet.
- Xhuma i- ucingo oluphansi to the green ground screw.
Okubalulekile: The Legrand 1597TRW features a feed-thru wiring configuration that allows the GFCI to protect downstream receptacles. It also prevents line-load reversal miswire, meaning there will be no power to the face or downstream receptacles if wired incorrectly. An auto-ground clip assures a positive ground to a metal box.
Faka i-Outlet: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box using the provided mounting screws.
Faka i-Wall Plate: Attach the screwless wall plate (not included) over the GFCI outlet.
Buyisela Amandla: Vula amandla futhi ku-circuit breaker.

Isithombe: Ngaphambili view of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This image shows the two tamper-resistant receptacles, the TEST button (black), and the RESET button (red).

Ukusebenza

The GFCI outlet is designed to protect against electrical shock by quickly shutting off power if a ground fault is detected.

SETHA KABUSHA Inkinobho: After installation or a power outage, press the red RESET button to restore power to the outlet.
TEST Inkinobho: Press the black TEST button to simulate a ground fault. The GFCI should trip, and power to the outlet will be cut off. This confirms the GFCI is functioning correctly.

Ukuhlolwa kwanyanga zonke:

It is recommended to test your GFCI outlet monthly to ensure it is providing continuous protection. To test:

Xhuma i-alamp or other device into the GFCI outlet and turn it on.
Press the black TEST button. The lamp should turn off, and the red RESET button should pop out.
Press the red RESET button. The lamp should turn back on.
Uma i-lamp does not turn off or on as described, the GFCI may be faulty and should be replaced.

Isondlo

The Legrand 1597TRW GFCI outlet requires minimal maintenance. Regular testing is the primary maintenance procedure.

Keep the outlet clean and free from dust and debris.
Do not paint over the GFCI outlet or its buttons, as this can impair operation.
If the GFCI trips frequently without an apparent cause, consult a qualified electrician to inspect your wiring.

Ukuxazulula inkinga

Inkinga	Imbangela Engenzeka	Isixazululo
GFCI will not reset.	Akukho mandla ku-GFCI. Kutholwe iphutha eliphansi. Line-load reversal miswire. Faulty GFCI.	Hlola i-circuit breaker. Unplug all devices from the GFCI and downstream outlets. Try to reset. If it resets, plug devices back in one by one to identify the faulty device. Verify wiring connections (LINE to LINE, LOAD to LOAD). Shintsha i-GFCI.
I-GFCI iyahamba njalo.	Faulty appliance/device. Moisture in the circuit. Izintambo ezonakele.	Thola futhi ususe ithuluzi elingasebenzi kahle. Ensure the environment is dry. Consult a qualified electrician to inspect wiring.
Awekho amandla esitolo.	I-GFCI ikhubekile. Ikhefu lesekethe likhubekile. Izintambo ezingalungile.	Cindezela inkinobho ethi SETHA KABUSHA. Hlola futhi usethe kabusha i-circuit breaker. Qinisekisa ukuxhumana kwezintambo.

Imininingwane

Imodeli: 1597TRW
Ibhrendi: I-Legrand
Umbala: Emhlophe
Ampukuthukuthela: 15 Amps
Voltage: 125 volts
Isamba Sezindawo Zamandla: 2
Uhlobo Lwesixhumi: Nema 5-15
Okubalulekile: Insimbi
Izici: Tamper Resistant, Auto-Ground Clip, Feed-Thru Wiring, Line-Load Reversal Miswire Prevention
I-UPC: 680147085438
ASIN: B079LTP7Y5

Iwaranti kanye Nokusekela

Legrand products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Legrand website. For technical support or further assistance, please contact Legrand customer service.

Contact information for Legrand can typically be found on their official webindawo noma ukupakishwa komkhiqizo.

Legrand 1597TRW