Isingeniso
Thank you for choosing the Project Source 2-Pack 7.4-in W White LED Flush Mount Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixtures. Please read this manual thoroughly before installation and retain it for future reference.
These LED flush mount ceiling lights are designed for both indoor and outdoor living spaces, featuring a wet-rated design. They are Energy Star rated for efficiency, provide a color temperature of 3000K, a Color Rendering Index (CRI) of 90, and an output of 730 lumens.
Ulwazi Lokuphepha
Always follow basic safety precautions when installing or working with electrical fixtures to reduce the risk of fire, electric shock, or personal injury.
- ISEXWAYISO: Ingozi yokushaqeka kukagesi. Nqamula amandla ku-fuse noma ku-circuit breaker ngaphambi kokufaka noma ukusevisa.
- ISEXWAYISO: Risk of fire. Use only in circuits rated for the fixture.
- Xhumana nosebenza ngogesi oqeqeshiwe uma ungaqiniseki ngenqubo yokufaka.
- Ungaguquli i-fixture nganoma iyiphi indlela. Noma yikuphi ukuguqulwa kungase kuqede iwaranti futhi kudale ingozi yokuphepha.
- Qinisekisa ukuthi konke ukuxhumana kuvikelekile futhi kugqunywe ngendlela efanele.
- Do not install near heat sources or in areas with excessive moisture beyond its wet-rated capabilities.
- This product is designed for direct wire connection and does not use a plug.
Yini EseBhokisini
Qinisekisa ukuthi zonke izingxenye zikhona ngaphambi kokuqala ukufakwa:
- 2 x Project Source 7.4-in LED Flush Mount Light Fixtures
- I-Hardware yokukhweza
- Isilawuli kude (Note: While the product data mentions a remote control, typical flush mount lights of this type do not include one. Please verify your specific package contents.)
Ukusetha (Ukufakwa)
Installation should be performed by a qualified individual. Always ensure power is disconnected at the circuit breaker before starting.
- Vala Amandla: Thola i-circuit breaker elawula indawo yesibani bese uyicima. Qinisekisa ukuthi amandla acinyiwe usebenzisa i-voltagumhloli.
- Lungiselela Ukukhweza Indawo: Qinisekisa ukuthi ibhokisi likagesi lifakwe kahle futhi liyakwazi ukusekela isisindo sensimbi.
- Xhuma Izintambo: Connect the fixture's wires to the corresponding house wires using wire nuts (typically black to black, white to white, and ground to ground). Ensure all connections are tight and secure.
- I-Mount Fixture: Carefully align the fixture with the mounting holes on the electrical box and secure it using the provided mounting hardware.
- Buyisela Amandla: Uma i-fixture isifakwe ngokuvikelekile, buyisela amandla ku-circuit breaker.
Image: Two Project Source 7.4-inch white LED flush mount ceiling lights, showcasing their compact and low-profile design suitable for various indoor and outdoor applications.
Imiyalelo yokusebenza
The Project Source LED Flush Mount Light operates like a standard ceiling light fixture. Once properly installed and power is restored, it can be controlled via a standard wall switch.
- Ukuvula/Ukuvala: Flip the wall switch connected to the fixture to turn the light on or off.
- Ukusebenza kahle kwamandla: As an Energy Star rated LED fixture, it consumes significantly less energy than traditional incandescent bulbs, providing long-term savings.
Isondlo
These LED fixtures require minimal maintenance due to their long lifespan. However, occasional cleaning is recommended to maintain optimal light output and appearance.
- Ukuhlanza: Qinisekisa ukuthi ugesi ucishiwe ngaphambi kokuhlanza. Sebenzisa i-d ethambile, eyomile, noma ethambile kancaneamp cloth to wipe the surface of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Ubude be-LED: The integrated LED light source is designed for long-term use and is not user-replaceable. If the LED fails, the entire fixture typically requires replacement.
Ukuxazulula inkinga
Uma uhlangabezana nezinkinga ngesibani sakho, bheka izinkinga ezilandelayo nezisombululo:
| Inkinga | Imbangela Engenzeka | Isixazululo |
|---|---|---|
| Ukukhanya akukhanyi. | Akukho mandla ku-fixture; izintambo ezikhululekile; iswishi engasebenzi kahle. | Hlola i-circuit breaker. Qinisekisa ukuthi zonke izintambo zixhumekile ziphephile. Hlola iswishi yodonga. |
| Ukucwayiza okukhanyayo. | Loose wiring; incompatible dimmer switch (if applicable); power fluctuations. | Verify wire connections. Ensure the fixture is not connected to an incompatible dimmer. Consult an electrician for power issues. |
| Ukukhanya okuphumayo kufiphele noma akuguquguquki. | Dust accumulation on diffuser; aging LED components. | Clean the diffuser. If the issue persists and the fixture is old, it may be reaching the end of its lifespan. |
| Fixture makes humming noise. | Loose mounting; electrical interference. | Ensure fixture is securely mounted. Consult an electrician if noise persists. |
Imininingwane
- Inombolo Yemodeli: CLL56-2WW
- Ubukhulu bomkhiqizo: 7.4 x 7.4 x 1.4 amayintshi
- Isisindo: 2.15 Pounds (per pack, total for 2 lights)
- Ibhrendi: Umthombo wephrojekthi
- Umbala: Emhlophe
- Ifomu Lokulungisa Okukhanyayo: Ceiling (Flush Mount)
- Ukusetshenziswa Kwangaphakathi/Ngaphandle: Indoor/Outdoor (Wet Rated)
- Umthombo wamandla: Corded Electric (Direct Wire)
- Okuphumayo Okukhanyayo: 730 Lumens
- Izinga lokushisa lombala: 3000K
- Inkomba Yokunikeza Umbala (CRI): 90
- Isilinganiso Samandla: Inkanyezi yamandla
Iwaranti kanye Nokusekela
Project Source products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or replacement parts, please contact Project Source customer service. Keep your purchase receipt as proof of purchase.
For assistance, please refer to the contact information provided on the product packaging or the official Project Source webindawo.