Lepro Industrial LED Desk Lamp

Isingeniso

This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Lokhu okuguquguqukayo lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.

Please read this manual thoroughly before installation and operation, and retain it for future reference.

Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.

Imiyalo yokuphepha

• Read all instructions carefully before using the lamp.
• Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
• Use only E27 base bulbs with a maximum wattagkwe 40w.
• Ungasebenzisi i-lamp ngentambo yamandla eyonakele noma ipulaki.
• Lo mkhiqizo uhloselwe ukusetshenziswa endlini kuphela. Ungavezi amanzi noma umswakama ophezulu.
• Gcina i-lamp kude nezinto ezivuthayo.
• Ungazami ukuqaqa noma ukulungisa i-lamp Xhumana nabasebenzi abafanelekayo ukuze uthole usizo.

Okuqukethwe Kwephakheji

Sicela uhlole iphakheji ngezinto ezilandelayo:

• Lepro Industrial LED Desk Lamp (main unit with clamp)
• Imaniwali yosebenzisayo

Qaphela: Ibhalbhu ye-E27 ayifakiwe futhi kumele ithengwe yodwa.

Ukusetha nokufaka

Follow these steps to assemble and install your desk lamp:

1. Namathisela i-Clamp: Bopha ngokuphephile i-clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
2. Hlanganisa i-Lamp Ikhanda: Faka i-lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
3. Insert the Arm: Faka ngokucophelela i-lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
4. Faka I-bulb: Qinisekisa ukuthi i-lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp Ungaqinisi kakhulu.
5. Xhuma Emandleni: Xhuma i-lampIntambo kagesi ingene endaweni kagesi efanelekile.

Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.

Isithombe: I-lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.

Imiyalelo yokusebenza

Vula/Vala: Locate the rocker switch on the power cord. Press the switch to turn the lamp vula noma vala.

Ukulungisa I-Engeli Yokukhanya: Abakwa-lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.

Isithombe: I-lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.

Isondlo

Ukuhlanza: Ukuhlanza i-lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.

Ukushintshwa kwe-Bulb: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp ngibuyele phakathi.

Ukuxazulula inkinga

• Lamp ayivuli:
  • Hlola ukuthi intambo yamandla ixhunywe ngokuvikelekile yini endaweni yokuphuma.
  • Ensure the rocker switch on the cord is in the 'ON' position.
  • Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
  • Check the power outlet by plugging in another device.
• Ukukhanya kuyacwayiza:
  • Ensure the bulb is screwed in tightly.
  • The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
  • Check for loose connections in the power cord or outlet.
• Lamp is unstable:
  • Qinisekisa ukuthi i-clamp is tightened securely to the desk or surface.
  • Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
  • Bheka ukuthi i-lamp arm is properly inserted into the clamp okuhlangene.

Imininingwane

Image: Product dimensions and key features like E27 bulb base and power cord length.

Iwaranti kanye Nokusekela

Isiqinisekiso: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Ukwesekwa Kwamakhasimende: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.